Used Heating Nozzles 49 Pieces for sale (25,073)

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor Bodpoix Aiyjfx Amyjdf with integrated heat recovery with Aircontrol Premium controller Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Visit our store we have a lot of used and new compressors on stock.

Condition: used, Year of construction: 1994, functionality: fully functional, Used storage tank/heating oil tank Vertical design Storage volume: 40,000 liters Complies with DIN 6616 D, double-walled construction Bdjdpfx Amszq U U Ujyof Cleaned and decommissioned

Condition: excellent (used), Year of construction: 2007, operating hours: 36,514 h, functionality: fully functional, type of input current: AC, power: 300 kW (407.89 HP), fuel: domestic gas H, type of cooling: water, Equipment: documentation/manual, CHP plant, combined heat and power plant AVESCO CAT TBG-926-24SY with heat pump After the new gas heating system is commissioned in our heating plant in September 2025, the CHP plant will be available. The plant has been regularly and professionally maintained. With 36,514 operating hours, it is in very good condition. The plant can supply 70 apartments with heat and electricity. In March 2026, an emissions test was carried out; see the measurement report. If desired, an on-site inspection can be arranged. The dismantling and transport must be taken over by the buyer. The cost estimate prepared by us amounts to approximately 40,000 euros. Bjdpezq S Tnefx Amyjdf The location is in CH-8620 Wetzikon ZH.

Year of construction: 2005, condition: excellent (used), Name: Lödige heating/cooling Mixers Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Total content: COOLING MIXER: vessel capacity: 391, Jacket capacity: 45 liters. RAPID HEATING MIXER: vessel capacity: 210 liters. Jacket capacity: 30 liters Speed: 104 / 300-1500 rpm Driving force: BEVEL GEAR MOTOR: 11 kW, n1 = 1300 rpm, n2 = 104 rpm and ENGINE IM V1 Frequency controlled: 45kW 300/1500 rpm Operating voltage: 400 V, 50 Hz Material: Stainless steel Hours of operation: Very few operating hours Design: ATEX version / Explosion proof Gear box: Bevel gear motor/ motor frequency controlled Parts in contact with product: Stainless steel 1.4541 Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: It was used in a technical plant for wood chip and melamine resin additives. Bedeiup H Tspfx Amyedf Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter DN 200/ 100 und DN 150/ 100

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block Bdjdpfx Amezn I Rdoyef -Prism block: for marking plate, clamping plate, straightening bench ... 2 pieces -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 380/205/H240 mm -Weight: 77 kg

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Bdsdpfx Amjxxz Ukeyof Digital Display for Accuracy: Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Bedpfjykvdlox Amyedf Machine weight: approx. 2.2 t

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp Bdodpfxjznu Ags Amysf -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block Bsdpfxoznuhpo Amyjdf -Prism block: for marking plate, clamping plate, straightening bench ... 2 pieces -Hole spacing: 220 x 90 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 280/275/H200 mm -Weight: 30.1 kg

Condition: ready for operation (used), The FluidX HT121TS is a semi-automatic sheet heat sealer designed for laboratory plate sealing. Key Technical Specifications Device Type: Semi-automatic sheet heat sealer. Weight: Approximately 5 kg (net). Application: Used for applying thermal seals to microplates, typically in conjunction with FluidX sample storage tubes. Bsdoy D D Umjpfx Amyodf Format Compatibility: Designed to handle various plate formats common in automated workflows. Operational Features Variable Temperature: Supports a range of temperatures for different sealing materials. Manual/Semi-Automated Integration: Compatible with both low-throughput manual tasks and high-density automated storage systems. Good working condition. Please check out our other listings as well.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Bodpfxeznk R Te Amysdf -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc. Bjdpfx Asznkxwsmyedf

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 Bsdpfx Amjzd Uhhsysdf For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm Bdedpeznafyefx Amyof -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: Bodpfxjzp Rmqo Amyjdf - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, overall weight: 8,000 kg, power: 450 kW (611.83 HP), heating capacity: 450 kW (611.83 HP), smoke pipe connection diameter: 400 mm, temperature: 90 °C, total height: 1,900 mm, total length: 3,000 mm, total width: 1,800 mm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, hot water, Automatic wood chip boiler with automatic fuel feeding. The combustion chamber was relined in 2023. Bedpfszp H N Uox Amyodf

Condition: used, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Bodpfjzp H Epex Amysdf Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, INDUSTRIAL ELECTRIC HEAT TREATMENT FURNACE - EMISON Electric heat treatment chamber furnace manufactured by EMISON (Forns Elèctrics Emison SA, Badalona, Spain), a Spanish specialist in industrial furnaces. From an industrial company liquidation (insolvency proceedings). Bdsdezbg Rqepfx Amyof ═════ SPECIFICATIONS ═════ - Manufacturer: EMISON (Forns Elèctrics Emison) - Country of origin: Spain (Badalona) - Type: Electric heat treatment chamber furnace - Power supply: 380V three-phase - Heating: electric resistance elements - Temperature control: analog - Large heating chamber - Robust metal frame construction - Model: [TO BE CONFIRMED FROM NAMEPLATE] - Max temperature: [TO BE CONFIRMED] - Total power: [TO BE CONFIRMED] - Chamber dimensions: [TO BE CONFIRMED] ═════ CONDITION ═════ - Used, from an industrial closure (not due to malfunction) - Frame in good condition - Sold as-is, a full inspection is welcome before pickup - Original manual NOT included - No warranty implied ═════ ABOUT THE MANUFACTURER ═════ EMISON (Forns Elèctrics Emison SA) is a Spanish industrial furnace manufacturer based in Badalona, Barcelona, and is still active today. The manufacturer provides technical support and spare parts directly for existing units. This makes EMISON furnaces a safer choice than those from defunct brands. ═════ APPLICATIONS ═════ Suitable for: - Heat treatment of metal parts (annealing, tempering, hardening preheat) - Industrial drying processes - Ceramic firing (low-medium temperature) - Curing of coatings and paints - Laboratory and R&D thermal processes - General industrial heating ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: [TO BE CONFIRMED - approx. 600-1,000 kg] - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport Keywords: EMISON furnace, heat treatment furnace, electric industrial oven, chamber furnace, Spanish furnace, annealing oven, drying oven, tempering furnace, industrial heating equipment. For technical questions, additional photos, or to schedule an inspection, please send a message.

Condition: used, mileage: 594,528 km, power: 260 kW (353.50 HP), first registration: 06/2016, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning,

Condition: used, mileage: 538,359 km, power: 260 kW (353.50 HP), first registration: 06/2016, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning,

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature Bdodozpy Idjpfx Amyef - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: new, Year of construction: 2026, Features and applications Base and movable jaw made of high-quality cast iron Replaceable, grooved jaw inserts, inductively hardened and ground Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Bdodpfx Aevxgq Usmyef Equipment: crank, fixing grooves

Condition: new, Year of construction: 2026, Features and applications Base and movable jaw made of high-quality cast iron Bedpfx Aevxgp Dsmyodf Replaceable, grooved jaw inserts, inductively hardened and ground Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Equipment: crank, fixing grooves

Condition: good (used), APV Heat Exchanger. Type : N35. Normal capacity : 6.5m3/H. Transmission surface : 67,9m2. Working pressure : 6bar. Test pressure : 6bar. Volume, Side 1 : 94liter. Volume, Side 2 : 94liter. Working temperature, MAX/MIN. Degrees Celsius. 120/0. ORA.18 Bedpfxsrwl I Ho Amyjdf

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Bjdpewah R Refx Amysdf Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.