Used Hanna Hi 180 Speedsafe Magnetic Stirrer for sale (12,038)

Condition: used, 10-position digital magnetic stirrer without heating, designed for synchronous stirring. The magnetic coil technology provides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes Specification: Stirring speed: up to 1200rpm Lodpfx Afjylwcxj Sert Stirring capacity: 400ml per position Dimensions – 19 x 57 x 6cm (w x d x h) approx Weight – 5kg Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Lredpfx Aoz D Taajf Sst Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic block * Type: Neodymium * Dim. block: length 1150 mm, width 180 mm, height 80 mm. Ledpfxjywnc Uj Af Sert

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Lrsdpfx Afez Aquhj Sot Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Lsdpfx Afoxhfq Uo Sert Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Lsdpfx Afoxc Ew Dj Sort Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads VMA Wekerom

Year of construction: 2006, condition: used, functionality: fully functional, Pinacho Smart 180 lathe in excellent working condition Lodpfx Afjygq R Ss Sort

Condition: used, mileage: 39,440 km, power: 129 kW (175.39 HP), first registration: 01/2024, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, soot filter, Used vehicle Lredpfx Afsynvazo Sot * Vehicle no.: - 88 * Euro 6 green environmental badge * Daily 35-180 with Henschel 3-way tipper body * Loading dimensions approx. 3.5m x 2.05m x 0.4m * Automatic climate control * 3.0-litre turbo diesel with 129 kW (180 HP) * 8-speed Hi-Matic automatic transmission * Tow hitch with 3,500 kg towing capacity * Gross vehicle weight 3,500 kg, payload 900 kg * Rear axle air suspension * 3 seats * Cruise control * Ladder rack behind cab * Electric windows * Central locking * ABS * ASR (traction control) * German vehicle, 1st owner * Original mileage with service booklet ---- -> Please note: Viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to commercial customers or for export. The above-mentioned details, photos and equipment list are for general vehicle identification only and do not constitute guaranteed characteristics in the legal sense of a sales contract! All information and details regarding accessories are provided WITHOUT GUARANTEE. Subject to change, prior sale, and errors! The equipment list is not part of the contract and must be checked by each prospective buyer in detail on site before concluding a purchase. Subsequent complaints will not be accepted.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, displacement volume: 510 cm³, mold height (min.): 300 mm, ejector force: 80,000 N, ejector stroke: 180 mm, total length: 6,200 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 12,900 kg, Clamping force: 180t Year of manufacture: 2014 Injection unit 1050 Screw diameter: 55 mm Specific injection pressure: 1615 bar Injection volume: 510 ccm Pump motor power: 30 kW Cylinder heating band power: 16.3 kW Tool closing unit 1800 Clamping force: 180 t Tool plate dimensions: 880 x 830 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: from 300 mm Opening stroke: 750 mm Maximum platen distance: 1050 mm Weight: 12900 kg Dimensions (m) L x W x H: 6.2 x 1.8 x 2.2 m Technical data: - Clamping force 1,800 kN (180 t) - Injection unit 1050, screw diameter 55 mm - Max. injection volume 510 cm³ - Injection pressure 1,615 bar, holding pressure up to 2,050 bar - Injection rate 255 cm³/s - Metering stroke 215 mm, max. screw speed 230 rpm - Opening stroke 750 mm, min. mold height 300 mm - Max. platen distance 1,050 mm - Mounting plates 880 x 830 mm - Max. mold weight 2,250 kg - Ejector: stroke 180 mm, force 80 kN - 6 mold cooling circuits at 10 l/min Ljdpfsz Eacwsx Af Ssrt - Dry cycle time 2.0 s at 250 mm - Oil tank 540 l - Machine weight 12.9 t, dimensions 6.2 x 1.8 x 2.2 m

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Lrjdpfow U Sw Asx Af Set Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Lrodpoy Iyw Sjfx Af Sst

Condition: excellent (used), CATALOGUE NUMBER: 72133 TECHNICAL DATA - max. cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max. blade diameter 300mm - blade bore diameter 80mm - min. workpiece length 630mm - max. workpiece width 600mm From above: - pneumatic pressure roller - pawls - pressure shaft, metal, 2 pcs - pawls - saw shaft - pressure shaft, smooth - pawls - pressure shaft, smooth From below: - metal shaft, driving, toothed, 2 pcs - pawls - track - saw shaft - track - stepless feed speed control via frequency converter Ljdpfjzrmn Aox Af Sort - main motors 2x55kW - feed motor 4kW - hydraulic lifting of the machine body up/down - hydraulic adjustment of the saw shafts - pump motor 0.37kW - central lubrication - diameter of the dust extraction nozzle 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy - Two-shaft - Multi-blade saw, used, very good condition Net price: 238900 PLN Net price: 55558 EUR Net price calculated according to an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Lredpfx Aow R Tqpof Sjt

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Ljdjzxwypjpfx Af Sjrt For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) Lsdpfxjyzylvj Af Sort \+ 2x Magnetic platten

Condition: ready for operation (used), ELB SWN 5 VA II Horizontal Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping area: 900x250 mm - Table longitudinal stroke: 10-625 mm - Maximum table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance from table to spindle center: 525 mm - Vertical feed rate: 2-180 mm/min Ljdpfsy Dcpcox Af Sert - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - Complete technical data – see photos Dimensions (LxWxH): 2.7x2.2x2 m / Weight: 3500 kg Subject to errors and input mistakes

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Ljdozb Dr Sopfx Af Ssrt Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: used, functionality: fully functional, machine/vehicle number: 2487208, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 1,751 mm, fuel type: diesel, construction height: 2,590 mm, power: 55 kW (74.78 HP), color: yellow, fuel: diesel, Equipment: UVV, all wheel drive, cabin, pallet forks, Technical specifications Year of manufacture: 2021 Maximum lifting height: 17.51 m Maximum rated load capacity: 4,000 kg Load capacity at max. outreach: 0.1 t Load capacity at max. lifting height: 0.5 t Maximum engine power: 55 kW Maximum reach: 10.47 m Lodpfsyqzucjx Af Sort Dimensions (L x W x H): 6.27 m x 2.35 m x 2.59 m Travel speed: 40 km/h Operating weight: 11,380 kg Displacement: 4.8 l Transmission type: W Fully functional, general signs of use, all-wheel drive

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Ledpoy D Ug Tsfx Af Sjrt Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, machine/vehicle number: 60150944, overall weight: 5 kg, total length: 180 mm, total width: 224 mm, total height: 204 mm, volume flow: 10.3 m³/h, operating pressure: 16 bar, final pressure: 0.81 bar, power: 0.13 kW (0.18 HP), input voltage: 220 V, input frequency: 50 Hz, input current: 93 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,900 rpm, protection type (IP code): IP44, New DAB EVOPLUS 80/180 XM Circulation Pump – 230 V – 180 mm For Sale: New and unused DAB EVOPLUS 80/180 XM electronically controlled circulation pump – Item No. 60150944. The DAB EVOPLUS 80/180 XM is a professional, energy-efficient wet-rotor electronic circulation pump designed for heating, air conditioning, HVAC, and water circulation systems. Thanks to its integrated electronic variable-speed control, the pump can adapt its performance to the actual requirements of the installation, helping to reduce energy consumption while maintaining reliable circulation. Technical Specifications Manufacturer: DAB Pumps Model: EVOPLUS 80/180 XM Item number: 60150944 Condition: NEW – Never Used Type: Electronic wet-rotor circulation pump Power supply: 220–240 V Frequency: 50/60 Hz Rated current: 0.93 A Maximum power input (P1): 130 W Installation length: 180 mm Connection: 2" Maximum head: Approx. 8.1 m Maximum operating pressure: 16 bar Liquid temperature range: -10 °C to +110 °C Energy Efficiency Index (EEI): ≤ 0.20 Electronic variable-speed control Permanent-magnet synchronous motor Weight: Approx. 4.7 kg Pump Performance The EVOPLUS 80/180 XM features electronically controlled operation with different regulation modes. Original DAB performance curves are available, including: Δp-v: Proportional differential pressure control Δp-c: Constant differential pressure control P1 curve: Power input in relation to flow rate The original DAB performance curves show the relationship between flow rate (Q), head (H), differential pressure, and power consumption, making it easier to determine whether this pump is suitable for a specific installation. Applications Particularly suitable for: Central heating systems Commercial heating installations HVAC systems Air-conditioning systems Ljdpfjzyca Rjx Af Sort Water circulation systems Professional building installations Technical and industrial installations The DAB EVOPLUS 80/180 XM is an excellent choice for professional installers and technical companies looking for an energy-efficient electronically controlled circulation pump. Condition NEW PUMP. VADO Technical Wholesale – Uden, The Netherlands VADO specializes in pumps, installation technology, heating systems, water technology, and industrial applications. Technical questions about this pump or its suitability for your installation are welcome. Collection: Available by appointment in Uden, The Netherlands. International shipping: Shipping to other European countries and worldwide can be arranged. Please contact us for availability and shipping costs.

Year of construction: 2025, condition: like new (used), functionality: fully functional, Manufacturer: Metzner Maschinenbau Year of manufacture: 03/21/2025 AM 3800 wire stripping machine Automatic cable assembly machine for cutting to length and stripping cables, stranded wires, and solid wires up to 20 mm in diameter and 70 mm² cable cross-section Technical features & advantages: - Double-knife cutting head as standard, i.e. superior - Outstanding cutting force for cables up to 70 mm² - Exceptional stripping force and, at the same time, gentle handling of the cable thanks to belt feed with support roller - Standard with PC software for controlling an ink-jet printer or processing complex sequences and cable lists; i.e. standard-equipped to meet all requirements without additional costs - Clear and user-friendly operation with 15" touchscreen FHD display - Program memory with cable library for instant availability of recurring orders - Consistently designed for a wide range of applications - Robust construction for continuous industrial use - Pneumatic clamping pressure with automatic pressure control for gentle cable handling during transport and cable stripping - Excellent serviceability thanks to the fastest possible change of feed belts - Thanks to its modular design, the AM 3800 can be optimally adapted to specific requirements and expanded with additional modules Standard scope of supply: - Cable processing machine Metzner AM 3800 - 1 set of V-knives - 2 swiveling-pneumatic cable guides with quick-change guide sleeves - Power connection cable 2.0 m - Data storage with documentation, operating manual Performance data: - Cable cross-section stranded wire max. *): 70 mm² - Cable cross-section solid wire max. *): 16 mm² - Cable diameter max. *): 20 mm - Flat ribbon cables *): ≤ 18 mm width - Cable lengths: 20 mm - 999 m - Stripping length cable end: 200 mm - Stripping length cable end: 145 mm - Feed speed max.: 180 m/min - Shortest cable length: 70 mm - Material feed direction: left - right Material-dependent Technical data: - Electrical connection: 230V, 50/60 Hz - Compressed air connection: 6 bar - Dimensions (LxWxH): 695 x 880 x 485 mm (without screen) - Weight: 100 kg - Color: Housing RAL 7035 / RAL 5018 / RAL 7016 CE conformity: The AM 3800 meets all CE machine directives regarding mechanical and electrical safety as well as electro- magnetic compatibility. Incl. accessories: - Cable-specific guide sleeves - Blowing device - Various knife sets consisting of: - Infeed guide - Swivel tube - Outfeed guide Note: One guide set is required for each cable diameter. Lrjdpfjz Dat Tsx Af Sot AM 38XX connection for ink-jet printer AM 38XX connection for feeder AM38XX connection for material discharge

Condition: excellent (used), Year of construction: 2004, lifting height: 4,350 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, battery voltage: 12 V, color: gold, Forklift Jungheinrich DFG 20 AK Mast height: 0 cm Lredpfjzl Tqdsx Af Sst Triplex mast Load capacity: 1800 kg Maximum lifting height: 4.35 m Free lift up to 1.4 m Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 2021, swing over bed 1.050 mm Swing over cross slide 825 mm max. working diameter 825 x 2.500 mm control FANUC main spindle speeds 1.200 U/min CNC Turning- and Milling Center | HWACHEON - HI-TECH 850 YMC equipped with a turret for driven tools as well as C- and Y-axis, programmable steady rest and tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please note that the technical details were added from comparable machines. We ask for your understanding ! Lrsdpez Dxruofx Af Sot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HI TECH 850 | HI-TECH 850YMC | HITECH850YMC

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: Lrjdpfxozhub Ao Af Set - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, mileage: 276,441 km, power: 132 kW (179.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, soot filter, Used vehicle * Vehicle number: - 38 * Euro 6, green environmental sticker * Daily Panel Van Maxi, long version * Cargo length approx. 4.5m x 1.8m x 1.9m * Automatic climate control * Hi-Matic 8-speed automatic transmission * Tow bar with 3,500 kg towing capacity * Reversing camera * Rear parking sensors * Cruise control * Multifunction steering wheel * GVW 3,500 kg * 3 seats * Driver's comfort suspension seat * Partition wall * Cargo area lining: floor & walls * Electric windows * Central locking * Airbag * ABS Ledpfx Afextr S Nj Sort * ASR (traction control) * German vehicle, 2nd owner * Original mileage ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale only to businesses or for export. The above-mentioned data, photos, and equipment list are for general identification of the vehicle only and do not constitute guaranteed characteristics in the sense of sales law! All information and accessory details are provided WITHOUT WARRANTY. Subject to changes, prior sale, and errors! The equipment list does not form part of the contract and must be checked in detail by each prospective buyer on site before conclusion of purchase. Subsequent complaints will not be accepted.