Used Haas Work Center for sale (54,063)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Tsdpeixxwmsfx Amyoa T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, AUTOMATIC SHEET METAL BLANKING AND BENDING LINE – USED – CE CERTIFIED Tjdjxv Th Rjpfx Amyea Brand: CIMSA – Made in Italy Material Specifications • Material: Fe P01 – galvanized – pre-painted • Thickness: 0.6 – 2 mm • Maximum dimensions: 1000 x 2000 mm Line Dimensions • Total length: 25 meters + robot • Maximum width: 6.8 meters Line Composition • Motorized decoiler model SMC 100 • Straightening unit model CR 1000 • Electronic feeder model AP3 1000 • Punching unit consisting of 13 cylinders and 18 punching groups controlled by CNC • Tool change device • Press 60 tons, width 1000 mm, 50 kW, complete with: - die insertion trolley - sheet metal support - scrap evacuation conveyor belt • Blade change system on the shearing station • Platform with piece translation and tilting system • Transfer station adjustable in width by handwheel • Flipping device for piece turnover • Longitudinal positive/negative bending station • End positive/negative bending station Automation: ABB robot for automatic piece unloading

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel Tjdpfxsuickyo Amyoa N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) Tjdpfx Ael Ikzgsmyja * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Tsdpfx Aot Ul Dnjmyoa Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2000, SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. TWIN - CE - Axis strokes: X 3400 mm Y 1800 mm Z 1250 mm B unlimited C 400° - Head Type 4 (7.5 kw cad.) - Max rotation speed 24,000 rpm - N. 2 variable geometry tables TGV - Vacuum pomp - Yaskawa drivers - Osai control - Cabin on 4 sides + roof - Year 2000 Tjdpfx Amowrc Tdeysa - CE rules

Year of construction: 2018, condition: used, Schüco Aluminum/PVC CNC machining center – Model RSA-VM (BJM Ing., 2018) The Schüco RSA-VM is a CNC trimming and cutting machine (Rollen Sägemaschine / Reinigungs- und Sägemaschine) designed for the precision processing of aluminum and PVC profiles used in window and door manufacturing. Main Features Tsdpfsxqmr Eex Amysa * Precision Cutting & Trimming: Performs accurate cutting and edge trimming of Schüco aluminum or PVC profiles. * Deburring & Cleaning: Removes burrs, weld beads, and surface residues after cutting or welding operations. * High-Quality Finishing: Ensures excellent dimensional accuracy and surface quality prior to frame assembly. * Optimized for Schüco Systems: Fully compatible with Schüco profile geometries, supporting efficient and repeatable production. Applications Ideal for use in window and façade production lines, where reliability, precision, and surface quality are essential.

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication Tedpfepvai Dox Amysa

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) Tsdjk Uicgepfx Amyja - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 COMPLETELY RECONDITIONED

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Todex Irzcopfx Amyea Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software

Condition: used, Year of construction: 2016, machine/vehicle number: ab197, functionality: fully functional, workpiece length (max.): 3,000 mm, rotational speed (max.): 24,000 rpm, Equipment: documentation/manual, SECOND HAND 5+5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE JET - 5+5 interpolated axes - N. 2 independent working tables - N. 3+3 pneumatic clamps - N. 2 automatic loaders - Max working length 3000 mm - 2 high-performance working heads with 2+2 spindles each (4+4 tools) - Rpm 0-24.000 - Osai control Tjdpsx Rcm Uofx Amyea - Drivers YASKAWA - Pitagora software - S/N AB197 - Safety nets - CE rules - Year 2016

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop Tjdpfx Aeux Si Homyea - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; Tsdpjtz H Egsfx Amyja * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, SECOND-HAND WORKING CENTER FOR DOORS AND WINDOWS SAOMAD OPERATOR 8 - CE RULES Tedpjwrb Tvsfx Amyja Butting disk saw: - Motor power Hp 4 - Saw shaft revolution speed 3000 rpm - Disk saw diam. 400 mm. Tenoning side - Min. work piece lenght mm. 200 - Max. work piece lenght mm. 2800 - Min/max. work piece thickness mm. 30/120 - N. 2 shafts Sash profiling - Motor power Hp 0 - N. 4 shafts Glass stop recovery Hardware grooving unit Roller advance Wooden piece return roller Max. feeding speed 20 m/min - Year 2000

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel Todpfjugpwnox Amysa maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Tedpfezl Rzyex Amyoa Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Todpfxszlxnhe Amyoa Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min Tedpfozbh U Dex Amyja • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm CNC type: Haas Tjdoxq D Ecepfx Amysa Table length: 600 mm Table width: 355 mm Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Weight: 3190 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, Rigid tapping, rotation and scaling, Quick Code, spindle orientation (M19), high-speed machining, intuitive programming and advanced tool management, programmable spray nozzle, coolant system, lateral tool changer (24+1 positions), chip removal system with auger, Renishaw measuring system, drive and wiring for a Haas 4th axis, 5-axis capability (with tilting/rotary table). Todpfxozq Ab Ao Amyja

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tsdpfx Aewzyd Eomysa Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals Control: HAAS Spec: Travel X406 Y305 Z254 mm | 6000RPM | BT40 Accessories: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: excellent (used), Year of construction: 1997, HAAS VF10 X AXIS 3048 MM Y AXIS 813 MM Z AXIS 760 MM TABLE WEIGHT MAX 1800 KGS Tsdpfxjy Epkme Amyea 3 AXIS HAAS CONTROL THIS IS ALL THE DETAILS I HAVE AT THE MOMENT MORE WILL FOLLOW CHEAP MACHINE MORE PHOTOS AND A VIDEO IS AVAILABLE

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-4SSHE was manufactured in 2007. It features a maximum spindle speed of 12,000 rpm and a generous X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a capacity for 24 tools and includes cooling through the spindle and a chip conveyor. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SSHE vertical machining centre we have for sale. Contact us for further details. Tsdpfeznv Iwsx Amyoa • Cooling through spindle Additional equipment • Chip conveyor Technical Specification Taper Size BT 40

Year of construction: 2021, condition: used, total length: 1,700 mm, total width: 3,600 mm, Colour: White Empty weight: 3.500 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 3121880 - Drive system: CNC - Control system brand: Haas - Power [kW]: 12.2 - Centre height [mm]: 206 - Swing over bed [mm]: 419 - Carriage turning diameter [mm]: 356 - Distance between centres [mm]: 406 Todpfx Amsznmp Eeyea - Spindle bore [mm]: 44 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 6000 - Max. workpiece weight [kg]: 34 - Options: Chip conveyor - X-axis travel [mm]: 200 - Z-axis travel [mm]: 406 - Transport dimensions: 1700mm x 3600mm x 2mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 12000 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 70 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Tsdpfjza Ucrsx Amyja Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price