Used Griggio Psa 530 for sale (2,080)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Ljdpfszz Rpcjx Albeah - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm Ledpfxjz Rmyho Alboah - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick - Without hydraulic oil Price on request

Condition: used, Year of construction: 2018, operating hours: 19,432 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol Smooth G, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,454 h, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor belt left - Cooling by the spindle 15 bar Ledpfx Aezx S I Uolbsah - Kitagawa NC Rotary table MR 200 - Spindle total time 3.454 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible. Laodpfe Adt Htsx Albsh

Condition: excellent (used), Year of construction: 2011, operating hours: 22,001 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,050 mm, Travel distances: X-axis: 1800 mm Y-axis: 800 mm Z-axis: 600 mm Table size: 2050 x 750 mm Spindle speed: 0-8000 RPM Spindle hours: 6626 hrs Tool holder: SK40 Tool magazine: 30 positions Installation dimensions: approx. Width: 6500 mm Depth: 4400 mm Height: 4000 mm Weight: 12000 kg Lasdpfx Aszl Uxpjlbjh Machine hours: 22001 hrs Accessories: - Documentation

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number: 7405 TECHNICAL DATA - Max cutting height: 150mm - Max element width: 700mm - Working width of the saw arbor: 530mm - Max saw blade diameter: 450mm (installed: 350mm) 350mm - Arbor bore diameter: 90mm From above: - Ratchets - 2 toothed draw shafts From below: - 2 smooth draw shafts - Saw arbor Lasdpfozulwzsx Albsh - Smooth draw shaft - 4 feed speed settings - Feed motor: approx. 2kW - Main motor: 30kW - Machine dimensions (L/W/H): 2400x1700x1900mm - Weight: approx. 3000kg - Polish made - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to facilitate product identification. We only resell products that have already been introduced to the market by the manufacturer. We have no business relationships with the manufacturer.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Griggio CA 400 sliding table saw Year of manufacture 2004 S/N MC 00071750 Cutting length aluminum sliding table: 3200mm Double roller on the outside mechanical height and tilt adjustment Ljdpfx Aljtpv Aboboah motor power 5.5 kw main blade diameter 400 mm with scoring saw blade 3 speeds: 300/400 / 600 rpm Machine according to CE standard Weight 820 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Urban SV 530 with a turning station, configured to process from right to left, in very good condition, complete with internal and external tools for finishing PVC profiles. Upon request, we can install the machine and program it for your specific profile. Lodpfx Asz D Ildelbeah

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES - Year 1997 Lasdswrh Iyjpfx Albjh

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle running time: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 8,000 mm/min Spindle speed: up to 30,000 rpm Spindle running time: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The comparatively low spindle running hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDELIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. Ljdezc Rctspfx Alboah The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 2010, operating hours: 12,850 h, Linde H30D-01 triplo530 / side shift / 4th function / 2010 / 12,900 hours / DIESEL A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Lajdjzzzn Aspfx Albjh

Condition: used, mileage: 1,855 km, power: 220 kW (299.12 HP), first registration: 08/2026, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, total length: 12,130 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = - Climate control - EBS - Electrically operated mirrors - Heater - Hydraulic power steering Lasdpjz Ezu Usfx Albjh - Reverse camera - Side door - Sun visor - Tachograph = More information = Engine capacity: 7.698 cc Make of engine: Mercedes Benz Availability: in stock

Condition: used, Year of construction: 2017, Year: 2017 Condition: Very good Counter: Approx. 762,000 sheets Configuration: - Heidelberg suction feeder head - Pneumatic pressure system - Automatic sheet separation - New Teflon-coated non-stick roller - Foiling unit for spot foil application - Vibrating jogger delivery Technical Specifications: - Maximum laminating speed: 20 m/min - Sheet feeding: Automatic - Feeding system: Heidelberg suction feeder head - Feeder pile capacity: 540 mm - Sheet overlap control: Automatic, PLC-controlled - Overlap accuracy: ±2 mm - Sheet separation: Automatic, by cycling rollers - Paper weight: 115–500 gsm - Main roller pressure: Pneumatic - Minimum sheet size: 200 × 300 mm - Maximum sheet size: 530 × 740 mm - Maximum output: Approx. 1,650 B2 sheets/hour Lasdjz D Udtjpfx Alboh - Warm-up time: Approx. 8 minutes - Laminating temperature: 80–140 °C - External compressor requirement: 150 l/min, 6–8 bar - Power supply: 400 V / 50 Hz

Year of construction: 1967, condition: used, Swing over bed: 540mm, swing over carriage: 280mm, max. cross slide travel: approx. 410mm, max. compound slide travel: approx. 140mm, tailstock quill travel: 225mm, main spindle speed steps: 24, spindle speed: 9-1400rpm, 32 longitudinal feeds: 0.063-2.24mm/rev, 32 cross feeds: 0.032-1.12mm/rev, metric thread pitch: 0.25-560mm, module threads: module 0.1-50, diametral pitch threads: pitch 160-0.5, center height above flat guideway: 265mm, center height above top of V-way: 247mm, bed width: 403mm, main spindle with spindle nose according to DIN 55022: size 11, spindle bore: 103mm, internal taper: 1:20, largest diameter: 109mm, Morse taper of centers: No. 5, leadscrew pitch, standard: 12mm, tailstock quill diameter: 80mm, standard drive power: 18.5kW, rated speed of drive flange motor: 1400rpm, turning tool cross-section according to DIN 770: 25x25mm, max. faceplate diameter: 500mm, max. three-jaw and four-jaw chuck diameter according to DIN 6350: 315mm, weight: 3t, with work light, coolant system with chip tray, four-way tool post with face serration for one-hand operation on the compound slide, operating manual and fixed steady rest. An on-site inspection is possible. Lsdpfx Alszzqbljboah

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Order Picking Height: 10600 mm Initial Lift: Yes Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Lsdpozuufhjfx Alboah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance

Year of construction: 2004, condition: refurbished (used), MULTIVAC R-530 Ljdpehua Enefx Albsah ID.NO. 2200 Multivac R-530 drafter with Mr labeling for top package. Foil width 622 mm, 2x bush vacuum pumps, reel, tool 2.1 36 x 26.5 cm, jumbo stand year of construction 2004. Dimensions 970 x 125 cm Height 200 cm.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Laedpfx Ajzuud Relbsh Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area Laedpfx Aljzuw Rtjbjh - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, mileage: 715,787 km, power: 220 kW (299.12 HP), first registration: 02/2008, fuel type: diesel, number of seats: 156, gearing type: automatic, emission class: euro4, color: white, brakes: retarder, total length: 17,940 mm, total width: 2,550 mm, total height: 3,080 mm, Equipment: ABS, air conditioning, power assisted steering, traction control, = Additional options and accessories = Laodjz Szu Njpfx Albsh - Adjusted for handicapped - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Reverse camera - Sun visor - Tachograph = More information = AdBlue system: Yes Engine capacity: 11.967 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 30% Availability: in stock Number of microphones: 1

Condition: used, mileage: 834,743 km, power: 220 kW (299.12 HP), first registration: 11/2010, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, total length: 12,040 mm, total width: 2,550 mm, total height: 3,400 mm, Equipment: ABS, air conditioning, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Climate control - Double glazing Lodpfx Alszx Sv Eebjah - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 11.967 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 40%

Condition: excellent (used), mileage: 265,065 km, power: 390 kW (530.25 HP), first registration: 05/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Transmission: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Parabolic spring suspension Rear axle: Tire size: 315/70R22.5; Max. axle load: 13000 kg; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Air suspension Condition Technical condition: very good Optical condition: very good Damage: none Warranty Warranty: None Ledpo Ad Iu Ejfx Albjah

Condition: good (used), Year of construction: 1993, functionality: fully functional, Griggio T45S tilting spindle moulder year of construction 1993 S/N 9300I30 Table size 1050 x 750mm Height of worktop 880mm Spindle length 150mm Spindle diameter 30mm Stroke length 170mm Lajdpfx Alsrr U Dyjboh Inclination from -5 to + 45 degrees (by handwheel) Height adjustment by handwheel 4 speeds ( by belt adjustment ) 3200-4200-6000-8000 max diameter of the cutters: 300mm Motor 3kW with feed unit ( stepless feed ) Weight 450 kg

Condition: used, mileage: 1,110,183 km, power: 220 kW (299.12 HP), first registration: 12/2007, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, total length: 17,940 mm, total width: 2,550 mm, total height: 3,100 mm, Equipment: ABS, fog lights, power assisted steering, traction control, = Additional options and accessories = Ljdpfx Aljy Hxhajbeah - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph = More information = Engine capacity: 11.967 cc Make of engine: Mercedes Benz

Condition: new, mileage: 98,500 km, power: 390 kW (530.25 HP), first registration: 09/2024, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, retarder, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Alloy wheels - Air suspension - Particulate filter - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Auxiliary heater - Xenon headlights = Notes = Scania T530R Tuft R Torpedo - New - Full specification - BUFFL interior and exterior - Show truck Year of manufacture: 09-16-2024 Mileage: 1,500 km YS2R4X20005737359 TUFT Torpedo based on R cab New Full factory specification BUFFL interior and exterior Contact us for all information = Further Information = General Information Year of construction: 2024 Technical Information Number of cylinders: 8 GVWR: 20,000 kg Ljdpfx Alezvc A Djbjah Transmission Transmission: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Alloy wheels; Max. axle load: 9000 kg; Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Dual tires; Alloy wheels; Max. axle load: 13000 kg; Tire tread depth left (inner): 100%; Tire tread depth left (outer): 100%; Tire tread depth right (inner): 100%; Tire tread depth right (outer): 100% Functional Body manufacturer: Scania Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, mileage: 959,685 km, power: 220 kW (299.12 HP), first registration: 09/2005, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, total length: 17,990 mm, total width: 2,550 mm, total height: 3,100 mm, Equipment: ABS, power assisted steering, traction control, = Additional options and accessories = - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Sun visor - Tachograph Ledpfx Asy Huk Djlbeah = More information = Engine capacity: 11.967 cc Make of engine: Mercedes Benz