Used Goody 3 Machine Vices for sale (101,575)

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment Prodpfx Asxacfgodloc * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 253 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guide rail with 20 mm guide groove Dimensions L x W x H 480 x 150 x 107 mm Weight: 30 kg Prsdpszin Avofx Adlsc Good condition

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Psdjzlar Ujpfx Adljrc Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Pjdpfx Aouu Rthedlorc For further information or to contact us, please visit our website.

Condition: excellent (used), Catalog number: 7759 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - blade adjustable forward/backward, up/down, angle - pneumatic feed of the unit forward/backward - blade guard - motor 2.2kW I and II spindle of the milling machine: - tenon spindle: - spindle diameter 40mm - working height of the spindle 150mm - spindle locking - pneumatic feed of the units forward/backward - manual adjustment up/down - max. milling cutter diameter 300mm - motor approx. 7.5kW - side carriage – manual feed - carriage dimensions length/width 1000x380mm - angle ruler - pneumatic clamping - dimensions length/width/height 2600/3200 (for shipping 2200) / 1540mm Prsdpfx Ao Af Iw Dodljc - weight 1450kg ADVANTAGES - Made in Germany - 3-spindle - Unpainted - Very good condition - Used tenoning machine Net price: 13900 PLN Net price: 3230 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Prsdpoz R Icwsfx Adlsc Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Probe:Tool Probe (Hexagon)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine Podjxaawgspfx Adljrc - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Year of construction: 2005, condition: used, Chamber spray cleaning system Pjdpsz E I Sysfx Adlorc Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Condition: ready for operation (used), 1 unit available We are offering a high-quality GARANT LCV 125 G chuck for professional use in CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideally suited for 5-axis machining and complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-free workpiece clamping Suitable for single-part and series production Prsdpezuz R Refx Adlsc Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Predjvpdhxspfx Adloc Specifications see attached PDF. Leasing possible. (All prices are NET)

Condition: excellent (used), functionality: fully functional, 3-axis machining center Work area: 1350 x 2565 mm. Pedpfx Aszcpfasdljrc Workpiece clamping via vacuum pump.

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Prodjyam Exspfx Adlec Location: Austria, near Leoben

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Psdpfx Adoy Sbxfelorc

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm Pedpfx Aeztfxiodlsrc total power requirement 3 kW weight of the machine ca. 2 t

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, controller manufacturer: Mazatrol SMOOTHEZ, workpiece weight (max.): 1,200 kg, total height: 2,938 mm, total length: 3,816 mm, total width: 2,902 mm, table width: 600 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,000 kg, operating hours of spindle: 250 h, spindle motor power: 18,500 W, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9803 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours  ATC 48 Position Optional Lehmann EA-520 R-Mi4 4e axis integrated Optional Lehman Tailstock  Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe  Optional tooling package ca 30 units Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 Pedpjzx Sprofx Adlsrc X - Travel: 1050mm Y - Travel: 600mm Z - Travel: 600mm Table Length: 1300mm Table Width: 600mm Table load: 1200 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 48 Coolant through spindle / Bar:20 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 3816mm Width: 2902mm Height: 2938mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 Predpfx Adoz Dkzhjlsc - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: used, Roaches 3 Bad Labor Dyeing Machine Roaches 3 Bad Labor Dyeing Machine 400 V 6600 W 10 A Psdpouzhqrefx Adlsrc H x W x D = 920 x 1760 x 450 mm More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm Pedozxt Txspfx Adljrc plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: used, Roaches 3 Bad Labor Glass Coloring Machine Roaches 3 Bad Labor Coloring Machine Pedpfx Ajuzhudjdlorc 240 V 6500 W 10 A H x W x D = 920 x 1760 x 450 mm You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Type: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: used, from a training workshop, cleaned and operational, ready for demonstration Spindle hours: 2,542 hours X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 - 4,500 rpm Podjzza Smopfx Adlorc Feed rates: 0 - 2000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1920 kg Space requirement: approximately 2000 x 2000 x 2100 mm Total power consumption: approximately 7 kVA Central lubrication system Coolant system CE compliant Scope of delivery: – Technical documentation – Full protection enclosure – LED machine light

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Prjdpfxeztckis Adljc Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment Psdeq Sz Ahepfx Adlsrc

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,39 t dimensions of the machine ca. 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm Prsdpfx Asrb Hcfsdlec - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base Podpez Ebvrofx Adlorc - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, warranty duration: 12 months, total height: 730 mm, total length: 1,115 mm, total width: 490 mm, overall weight: 50 kg, Machine for mini donuts, made of stainless steel materials according to AISI 304, according to the regulatory documents for the food industry. Automatic dosing, turning and removal of the donuts from the fryer. Electronic counter Easy to service. Predpfewp Il Hex Adlec