Used Gannomat Vector for sale (336)

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Lasdoz Dt Hyepfx Albeh Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Year of manufacture: 2009 Ljdpfx Aoycf Ikjlbsah

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder Ljdpjzktq Ijfx Alboah - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: good (used), power: 1.1 kW (1.50 HP), overall weight: 200 kg, Prebomat, drilling head for fitting operations, with 7 spindles, in very good condition. Lodpfxsz N T Uie Albsah

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Ledpjxc Hi Usfx Alboah Power consumption: 2.2kW Drilling unit: swiveling

Condition: excellent (used), CATALOGUE NUMBER 8126 Technical data: - max. disc diameter: 500mm - disc bore diameter: 30mm - max. dimension of cut blocks: 130mm - max. width of cut blocks: 160mm - transverse cutting of timber into blocks - feeder length (pneumatic cutting movement): 2640mm - pneumatic material clamping - stepless adjustment of the feeder advance speed via a relay - manual adjustment of the block dimensions - motor: 5.2kW - diameter of the dust extraction nozzle: 100mm - belt conveyor discharge table – TT-U model - belt width: 400mm - belt length: 2760mm Lasdpez U A Uiefx Alboh - motor power: 0.25kW - dimensions of the discharge table: 2550x800x1650mm - dimensions (L/W/H) of the block cutting machine: 2200x1080x2650mm - weight: 600kg ADVANTAGES - Made in Poland – very good condition – unpainted – used machine Net price: 18900 PLN Net price: 4395 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Laedpfx Aexnlfljlbeh

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Lodpfx Alsxdttiobjah - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Used Machine Ljdpfxszk Nwde Albeah Used Ganner Compact 30 In-Line Drilling Machine Features and Technical Specifications: 2 drilling beams, each with 15 spindles Pitch: 32 mm Drilling unit position adjustment: 0–650 mm Distance between drill hole rows: at least 190 mm Spindle speed: 2,800 rpm Motor power: 2 × 0.75 kW Max. workpiece clamping height: 70 mm Working height: 850 mm Compressed air connection: 6 bar Availability: upon request Location: Flörsheim

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm Lodjzk N Dwopfx Albjah - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: used, Used Machine Ledpfx Alozyy Dyobsah Features and Technical Specifications: - Fully automatic pneumatic control with control panel - Clamping, drilling, and unclamping; electric intermittent operation - Drilling unit: Number of spindles, pitch 32 mm: 23 Speed: 2,800 rpm Motor power: 1.5 kW/380 V Drill chuck for tools with a 10 mm h6 x 20 shank and flat Adjustment range for position settings: 0–60 mm Drill hole depth for drills with a total length of 57 mm: 0–30 mm Drill hole depth for drills with a total length of 77 mm: 0–50 mm Drill hole depth for drill bits with a total length of 95 mm: 0–70 mm - Passage width: max. 800 mm - Clamping height: max. 80 mm - Working height: 850 mm - Space requirement without stop ruler: 1200 x 900 mm - Compressed air connection: 6 bar - Sound level: less than 82 dB(A) - Weight: approx. 400 kg

Condition: new, Year of construction: 2026, Furniture doors and drawer fronts CNC machining center. Throughfeed machine for drilling, drilling & insertion of hardware, grooving and routing. Lsdodx A U Ijpfx Alboah Short introduction: • CNC controlled front processing center • Complete processing of furniture doors and drawer fronts • Workpiece length and width control system

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Laedpfx Aeihghrjlbeh Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Ledjz D Nkbjpfx Albeah

Condition: used, Year of construction: 1986, Second-hand machine Lsdpfezk N Agex Alboah Year of manufacture: 1986 Features and technical specifications: - with 7-spindle row drilling head with positioning pins - Spacing 32 mm - with drilling head for BLUM hinges - with drilling head for Hettich hinges - with the corresponding press-fit dies - Motor 400 V, 0.75 kW, 2800 rpm - with stop bars Availability: at short notice Storage location: 63934 Röllbach

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Lajdpfxeythcrs Albeh Central stop Pneumatic lift Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher Ljdpfx Aszxn S Aolbsah No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment Lasdsv Nptmepfx Albjh

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Laedpfxsxgfg Te Albsh Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz Laedpfey Saw Hex Albjh - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, hole spacing: 32 mm, Ganner Gannomat belt and line boring machine Ledpfx Aoq E Ur Ajlbjah Blum and Grass drill head 7 Spindle row hole drilling head incl. extension rulers 32 mm system pneumatic version

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Lajdev Npw Ejpfx Albeh Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00 Lajdpfx Ajumw Sbelbeh

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design Laodpfx Alsvxgrrsboh • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2015, loading space length: 13,320 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,910 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Refrigeration/freezer unit - Air suspension - Disc brakes = Notes = 2015 Schmitz refrigerated semi-trailer with ABS/EBS, SCHMITZ/ROTOS axles with disc brakes, CARRIER VECTOR 1950 D/E (diesel operating hours: 13,595 h / electric operating hours: 2,258 h), aluminum floor, internal dimensions: 13.32 x 2.50 x 2.65 m, tires 385/65-R22.5 on new rims (tread depth left: 6/8/7 mm; tread depth right: 7/7/7 mm), unladen weight: 8,713 kg, permissible total weight: 42,000 kg, Dutch registration. = Additional Information = General Information Year of construction: 2015 License plate: ON-43-RR Axle Configuration Tire size: 385/65-R22.5 Axle brand: ROTOS/SCHMITZ DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 40%; tire tread depth right: 45% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 50%; tire tread depth right: 45% Lsdpfx Aez Tzu Eelbsah Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 45%; tire tread depth right: 45% Weights Unladen weight: 8,713 kg Payload: 33,287 kg GVW: 42,000 kg Functional Cooling: 25 °C to 29 °C Body brand: Schmitz Cargobull SCB*S3B Refrigeration engine: Diesel and electric (13595 diesel operating hours; 2258 electric operating hours) Wall thickness: 50 mm Condition Technical condition: good Optical condition: good Additional Information Please contact Arne Honingh for further information.