Used Flexicam S2 2030 for sale (3,604)

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Kjdpfx Afezima Hstelw Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant Ksdpfxoziiwze Aftslw 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Kljdpfx Ajx Iulwoftew

Year of construction: 2017, condition: ready for operation (used), A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027. Kljdpfx Aezk Nbcsftow

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Ksdpfx Afjv Df I Netslw Technical details - Capacity: - 6,000 bph - Labeling stations: - 2 cold glue - 1 self adhesive

Condition: used, Year of construction: 2022,

Condition: used, Year of construction: 1999, lifting height: 4,240 mm, free lift: 730 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, fork width: 1,120 mm, total height: 2,100 mm, total length: 2,600 mm, total width: 1,180 mm, color: yellow, Empty weight: 4.433 kg Lifting capacity: 2.500 kg - Year: 1999 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 90-00945 - Lifting capacity: 2500kg Kodpezhv Epsfx Aftolw - Lifting height: 4240mm - Overhead clearance: 1980mm - Free lift: 730mm - Fork length: 1200mm - Maximum fork width: 1120mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Joystick, Free-lift - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2600mm x 1180mm x 2100mm (l x w x h) - Transport weight [kg]: 4433kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. Kodpfozkl Dysx Aftslw W120

Condition: used, Surface measuring device, Mahr Perthometer S2 Used, as shown in the pictures. Klsdpfx Afezkk Dxjtow From stock (may have storage marks). For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information about bank details, payment terms, etc. will be sent to you by email. W119

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm Ksdpfszhlnmjx Aftelw

Condition: excellent (used), Auxiliary switch for actuator, air damper -Manufacturer: Belimo, auxiliary switch unused in original packaging -Type: S2 Klodpfx Afef H Hxwotjw -Dimensions: 180/100/H40 mm -Weight: 0.3 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Type: DZH-63-50-PPV-A-S2 -Air inlet and outlet: adjustable -Weight: 2.6 kg Kjdob A S D Ejpfx Aftelw

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm Ksdpfx Afev N E Tijtjlw -Type: S2-50/32x630 /0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.3 kg

Condition: excellent (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm Kljdpfx Afeypu Uystow -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, keyboard -Manufacturer: Witron, Teubner Metalwo Panel Display Kodsh Rpamspfx Aftjlw -Type: TAST21-IBS-S2-T2 -Number: 2x panel available -Price per piece -Dimension: 270/65/H220 mm -Weight: 1.8 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Kledpfx Afjb A S D Dotjw -Type: DZF-40-125-APA-S2 -Air inlet and outlet: adjustable -Weight: 1.3 kg

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 3.12 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V Kledpfscaq Dkex Aftsw -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 2.2 kg

Condition: used, Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm -Stroke: 50 mm Klsdpfx Afsd S Dahjtew -Swivel angle: 0 to 272° -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

Condition: used, Three-phase motor, electric motor -Power: 1.5 kW Kljdpedwhuijfx Aftow -Speed: 2820 rpm -Shaft: Ø 24 x 30 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 300/230/H170 mm -Weight: 13.1 kg

Condition: used, Control unit, control panel, control panel, control unit, foot switch, safety foot switch Kjdpfogqlgyjx Aftjlw -Manufacturer: Steute, 2-pedal safety foot switch -Type: C S2 OS/OS -Metal housing: with protective cover, die-cast aluminum -Dimensions: 275/280/H130 mm -Weight: 2.6 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 59900 € 1132.11 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Kjdpfxewiq E Ne Aftolw Back stop extension Vacuum holder

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, Product Description: We are selling a well-maintained, heavy-duty HOMAG OPTIMAT KAR 310/5/A20/S2 single-sided edge banding machine. Known for its reliability and precision, this machine is ideal for professional woodworking companies requiring high-quality edging for various materials and thicknesses. Manufacturer: HOMAG Model: OPTIMAT KAR 310/5/A20/S2 Condition: Excellent working condition, ready for immediate use. Year of Manufacture: 2007 Working Hours: Cant see right now because power cabel is not attached. Key Technical Specifications and Features: Kodjxvqqpepfx Aftjlw Gluing System: FE-MA-TECH Advanced PUR 2 kg fully refurbished 2025.11.10, with 2 new glue pots. Feed Speed: 18m/min Panel Thickness: 10-60mm Edge Thickness: 0.3 - 20 mm Included Processing Units (Aggregates): Jointing/Pre-milling Unit: For perfect edge preparation. FE-MA-TECH Advanced PUR 2 kg Pressure Zone: Optimized for thick edges. End Trimming Unit (HL): Precision trimming of front and rear edge overhang. Fine Trimming Unit (MFL): Top and bottom trimming for flush or radius finish (S2 setup). Profile Scraping Unit (PN): To remove traces from trimming for a smoother surface. Buffing/Polishing Unit (SM): For a perfect, high-gloss finish. Additional Information: Service History: Service every year by Projecta OY (Estonia), 2023 - Change whole software and computer system.

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Diameter: 900 mm Kjdpeh Dimnsfx Aftslw

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Very good condition, machine comes from a school Kledpozgupkofx Aftow Operating hours: 14,000

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm Kljdpfx Aezggahjftjw - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor