Used Faymonville Faymonville Telemax Sattelauflieger - 2Fach Tele for sale (1,349)

Condition: used, maximum load weight: 44,050 kg, overall weight: 61,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt: Equipment Gooseneck * Designed in SNT style to optimize the loading area length * Length approx. 3,750 mm * Gooseneck can be raised, lowered, and extended hydraulically * Technical fifth-wheel load: 34,000 kg. For SZM: 6 x 4 or 8 x 4 (or 6 x 4 with 1-axle dolly 235/75-17.5) Low-bed * Designed as a telescoping kettle bridge with a low overall height * With extension at the front and mechanical locking * Length x Width approx. 7,550 mm x 2,740 mm Rear chassis * With closed outer frame * Diamond plate surface and continuous prism excavator recess approx. 1,450/900 x 505 mm, open at the rear Braking system * WABCO EBS-E, in accordance with EU regulations Axles and suspension * PENDEL-AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle balancing cylinder with automatic RESET function * Technical axle load: 12,000 kg each * Hydraulic axle equalization Tire equipment * 245/70 R 17.5 3PMSF Psdszzudwspfx Af Ssgt * Load index 143/141L(146/146F) * Manufacturer of our choice Paint finish: * Trailer color: RAL 3002 Carmine Red Included accessories * Steel front wall, pluggable, approx. 400 mm high * Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) * 3 kW electric-hydraulic unit for controlling the hydraulic operations * With the exception of hydraulic winches, outer support of the gooseneck with mounting holes for screw-in lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each on the left and right on the rear bevel of the gooseneck (LC 10,000 daN) * Diamond plate surface above the gooseneck. * 3.5-inch kingpin * Guide plate of the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Hydraulic cross member for supporting the gooseneck on the SZM or a dolly. * 1 pair of steel ramps with climbing strips and mounting bolts for bridging the pick-up hooks of the low-bed * Mounting possibility for the steel ramps at the rear between the outer supports of the gooseneck. * 1 lashing ring each on the left and right on the front cross member (LC 10,000 daN) * 6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 2 pairs of screw-in rings M24 (LC 8,000 daN) included. * 6 pairs of recessed lashing rings on the outside of the outer supports of the loading area, foldable inward and outward (LC 10,000 daN). * 1 pair of threaded blocks at the front and rear on the outer supports of the loading area for mounting screw-in rings M24 (LC 8,000 daN). * 1 pair of screw-in rings M24 (LC 8,000 daN) included. * Preparation for mounting screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locking mechanisms. * Mechanical bolt-tab coupling of the low-bed to the chassis for exchanging the loading area or installing extension supports. * With electro-pneumatic-hydraulic couplings * Suspension rail at the front on the rear chassis for the low-bed for loose support ramps * 4 pairs of lashing rings hanging in the outer frame of the rear chassis (LC 10,000 daN) * 1 pair of lashing rings lying at the front in the excavator recess of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying in the excavator recess in the area of the 2nd axle of the rear chassis (LC 16,000 daN) * 1 pair of lashing rings lying at the rear in the excavator recess of the rear chassis (LC 10,00

Condition: good (used), axle configuration: 2 axles, first registration: 03/2004, total length: 15,600 mm, total width: 2,550 mm, color: green, Year of construction: 2004, Equipment: ABS, - Air suspension - Central lubrication system Rear axle 1: Steered Rear axle 2: Steered Unladen weight: 13,400 kg Payload: 22,600 kg GVWR: 36,000 kg Superstructure brand: FAYMONVILLE STBZ-2VA Loading platform height: 45 cm Technical condition: good Optical condition: good FAYMONVILLE STBZ-2VA – 2-AXLE LOW LOADER – TELESCOPIC – DETACHABLE GOOSENECK – HYDRAULICALLY STEERED Well-maintained and robustly built Faymonville STBZ-2VA 2-axle low loader, equipped with a detachable gooseneck, telescopic platform, hydraulically steered axles, air suspension, and a central lubrication system. A professional low loader for the transport of construction machinery, excavators, wheel loaders, cranes, as well as long and heavy machinery. GENERAL DATA * Manufacturer: Faymonville * Type: STBZ-2VA * Design: 2-axle low loader * First registration: 19.03.2004 * Number of axles: 2 * Axle manufacturer: BPW * Both axles hydraulically steered * Air-suspended * Central lubrication system * Detachable gooseneck * Excavator boom recess at the rear * Tires: 235/75 R17.5 LOW PLATFORM / LOADING AREA The Faymonville features a particularly low and widely telescopic platform. * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: approx. 1,390 cm * Width: approx. 255 cm * Loading height: only approx. 45 cm * Thickness of the loading platform: approx. 24 cm Due to the very low loading height of only approx. 45 cm, this low loader is ideally suited for the transport of tall machinery where the lowest possible overall height is crucial. The platform is telescopically extendable by an impressive 5.50 meters. This also makes the semi-trailer excellent for particularly long machines, structures and special transports. DETACHABLE GOOSENECK Equipped with a detachable gooseneck. This allows self-propelled machines to be conveniently driven directly onto the low platform from the front. Ideally suited for the transport of: Pedpfx Ajzy I Tvjf Segt * Excavators * Crawler excavators * Bulldozers * Wheel loaders * Crawler cranes * Road construction machinery * Agricultural machinery * Heavy and special construction machinery AXLES & CHASSIS Equipped with 2 BPW axles, both of which are hydraulically steered. The hydraulic steering ensures excellent maneuverability and is a major advantage, especially in tight construction sites, industrial plants and special transports. In addition, the low loader has air suspension, which ensures good driving characteristics and optimal load distribution. WEIGHTS * Technical total weight: approx. 36,000 kg * Unladen weight: approx. 15,600 kg * Specified payload: approx. 22,600 kg Note: The specified weights should be checked against the vehicle documents, as the unladen weight and specified payload together amount to 38,200 kg. DIMENSIONS * Overall length of low loader: approx. 1,560 cm * Width: approx. 255 cm * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: ...

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt from Equipment List Loading Platform * in extendable design with a rear slope of approximately 1,000 mm x 8° Hardwood Decking * approximately 48 mm thick, with ribbed metal sheeting over the axles JOST King Pin * (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) BPW Axles and Suspension * 2 fixed axles * 1 trailing axle * Technical axle load: 12,000 kg each Air Suspension * with lifting and lowering valve Braking System * in accordance with EU regulations with EBS-E (2S2M) Accessories * 2-inch king pin * One galvanized steel front panel, approximately 400 mm high * Load manometer for determining axle loads, including load diagram * Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * One galvanized toolbox integrated into the sloping gooseneck (± 47 kg) * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg) * 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg) * Galvanized extensions, extendable by approximately 230 mm on each side (± 230 kg) * Lift axle on the front axle * Adjustable mounting rails for aluminum ramps at the rear of the vehicle * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg) Pgodpfx Ajzv A Aqof Sjt * Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg) * A mounting bracket for a rotating beacon on the warning panels * One rotating beacon supplied separately * HRM Metallization (High Resistance Metallization) Painting * Top coat, single color in RAL 3002 carmine red.

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) Pgedpfxezz Ei Ro Af Set * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, Year of construction: 2021, Extendable superstructure: Yes Psdpfx Afjzl Exae Ssgt Please contact Theo Lelie for more information

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axles Radio remote steering Hydraulic ramp Camera = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth, left inner: 40%; Tire tread depth, left outer: 40%; Tire tread depth, right inner: 40%; Tire tread depth, right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth, left inner: 60%; Tire tread depth, left outer: 60%; Tire tread depth, right inner: 60%; Tire tread depth, right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVW: 66,000 kg Maintenance APK (Technical Inspection): valid until 02/2027 Financial information Price: On request Pgedpfx Afszp Dryo Sst Identification Model number: max trailer N/A F-S44 / STEERING = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: Pgsdpfx Aszqiitsf Set 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: excellent (used), Year of construction: 2026, Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Total permissible weight: 49.500 kg Podpfx Aozdizisf Ssgt Information: sample images Information: Location: Essen immediately available.

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Pgodpfx Afszu Ebto Sjt Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 Pgodpfx Ajx Upxxjf Sot We speak German Hablamos Español We speak English

Condition: used, Year of construction: 2014, Please contact Theo Lelie for more information Pgedpfx Ajxtqkwsf Sst

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) Pgsdpszvt Tyefx Af Sjt * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Pedozlmkwjpfx Af Sogt Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: new, Extendable superstructure: Yes Pgodpfx Aezw Ekgof Sot Please contact Theo Lelie , , ) for more information

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. Pjdpfx Afowta Als Segt WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: new, total length: 19,000 mm, total width: 600 mm, total height: 450 mm, Year of construction: 2022, Color: Red Load capacity: 430,000 kg Expandable Manufacturer: Faymonville Type: G-Module Vessel Deck Year: 2022 Connectable to Goldhofer THP SL Coupling Heads G-Module-SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically widenable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Pgedpfx Aouu Hixef Sjt Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression joint at the front and rear Color: RAL 3002 Elongation Beams 1 pair of elongation beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint at the front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 set of connecting lines for coupling pin G-Module = Further Information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Optical condition: very good Price: On request

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. - . Pgodpfx Aexxkqzef Set

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. Psdpfx Ajzqiiajf Sjgt - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2003, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 1,620 mm, total length: 12,500 mm, total width: 2,550 mm, total height: 1,620 mm, suspension: hydraulics, tire size: 275 / 70 R22.5, color: beige, Year of construction: 2003, Axle Configuration Tire size: 275 / 70 R22.5 Axle brand: SAF Suspension: hydraulic suspension Pgodpfeuu E S Sox Af Sot Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tires; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 13,100 kg Payload: 61,900 kg GVW: 75,000 kg Functional Loading platform height: 162 cm Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Pjdjzxzqxspfx Af Ssgt Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901003047, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, next inspection (TÜV): 11/2026, total length: 15,350 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 265/70 R19,5, color: grey, Year of construction: 2022, length (extended): 15,350 mm, length (retracted): 13,850 mm, Equipment: EBS, tail-lift, The images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin 14 pairs of lashing eyes recessed into the outer frame, 2.5 to each 24 to two-speed landing gear, single-side operation, with straight lower section, without lateral compensation 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mud flaps behind each axle Rear corner protection 2 spare wheel carriers for 1 spare wheel, with wheel mounting kit 1 x for semi-trailer wheel and 1 x for truck wheel Spare wheel, make at manufacturer's discretion 2 plastic toolboxes with drawer and shelf, W=650 / H=520 / D=670 mm 1 document box at the front bulkhead #Telescopic extension Central tube frame with neatly welded, interlocking telescopic frame sections Extendable by max. 1,500 mm and lockable after approx. 1,500 mm; exact dimension specified by EMPK; outer frame sections approx. 1,500 mm long for engagement in the outer frame when telescoped Locking by mechanical locking pin #Axles + suspension Drum brake axles, make at manufacturer's discretion Air suspension #Braking system Dual-line compressed-air braking system Spring-applied parking brake 2 non-interchangeable red/yellow brake coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Podpjz E Rqrsfx Af Segt With lift and lower valve #Wheels and tyres 265 / 70 R 19.5, make at manufacturer's discretion Steel rims in twin configuration, factory silver #Electrical system 24 Volt, multi-chamber lamps, yellow LED side lighting 2 white front position lamps 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cables 1 rotating beacon with holder, switched via side lights (removable lamp) 1 additional 7-pin socket (ISO 1724) in the rear underrun protection #Floor Approx. 30 mm thick phenolic resin-coated plywood panels, suitable for high point loads, for forklift axle loads up to max. 7,100 kg Steel/tread plate covering in the wheel arch area where required #Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,800 mm high, heavy-duty steel corner posts #Side boards 25 mm aluminium hollow profile, 600 mm high (manufacturer's choice), folding down and removable #Centre posts Pair of folding posts at side-board height, folding down and removable #Rear wall / rear corner posts Pair of folding or plug-in posts, at side-board height, removable 25 mm aluminium hollow profile, at side-board height, folding down and removable #Approval / signs Country of registration: Germany With DEKRA inspection and report Prepared for single-line number plate holder 1 warning panel in accordance with ECE 70 White reflective strips: on the sides of the side boards Red reflective strips: continuous around the rear wall #Paint finish Frame: DB 7350 Novagrau Landing legs: black coated Front corner posts: hot-dip galvanised Front bulkhead: anodised aluminium Side boards: anodised aluminium Centre posts / corner posts: silver

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. Pgedpfx Afjzhxgio Set • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: new, Extendable superstructure: Yes Please contact Theo Lelie for more information Pgedszl Timspfx Af Sot

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT Pjdozzhfuopfx Af Ssgt * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with