Used Esback Dissolver for sale (65)

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Hodpfx Aozd Urgsa Eofi

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Hfedpfx Aszdtflja Eei Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), For Sale: Set of Three Dissolvers / Mixers (photos numbered accordingly) 1. UNIVERSAL DISSOLVER – PASQUALE MORENO GENOVA Technical Specifications: -Agitator drive: Electric -Column lifting: Hydraulic -Adapted for connection to a screw feeder for dosing powder -INOX stainless steel mixing tank (no drive) -Dispersing disk diameter: Ø 250 mm -Disk rotation speed: 1400–2800 RPM -Tank dimensions: Ø 110 cm × 100 cm (height) -Overall dimensions (L×W×H): 210 × 110 × 170 cm -Power supply: 380/400 V 2. DISSOLVER 3HP with Inverter Hjdewwh Hgspfx Aa Eefi Technical Specifications: -Electric column lifting -Inverter for smooth speed adjustment -Agitator motor power: 3 HP (2.2 kW) -Dispersing disk diameter: 200 mm -Shaft length with disk: 600 mm -Maximum lifting height: 1000 mm -Total height: 2200 mm -Power supply: 380/400 V 3. LABORATORY MIXER FERRI F30 – 1HP Technical Specifications: -Smooth mechanical speed control via knob -Manual column lifting with counterweight -Electrical control box -Suitable for small containers -Total height: 1300 mm -Overall dimensions (L×W): 600 × 600 mm (with control box: 600 × 800 mm) -Max disk lifting height: 600 mm -Motor power: 1 HP (0.75 kW) -Speed range: up to 2800 RPM -Power supply: 220/230 V Keywords: dissolver, mixer, process equipment, mixing machinery, agitator, machine sales, used machines, chemical industry, cosmetics industry, production line, mixing technology, chemical production, Diamac

Condition: used, Type : Stirrer / Dissolver Wall support: manual Hfsdpfx Ajx R Ayhea Esi Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Up/down travel: 950 mm

Year of construction: 2023, condition: excellent (used), functionality: fully functional, For sale is a powerful Selmi Tank 400, the gold standard for professional chocolate processing. This machine is specifically designed for the efficient melting and precise tempering of large volumes of chocolate (up to 400 kg). Hfodpfxjy Nnifj Aa Eei The unit comes from a very well-maintained production environment, has always been handled properly and cleaned regularly. It is ready for immediate use and ideal for operations looking to expand or automate their capacity. Technical Highlights & Features: - Capacity: 400 kg – ideal for continuous supply of enrobing machines or dosing stations. - Heating System: Gentle melting via a precise water bath system (bain-marie), preventing scorching of the chocolate. - Agitator: Integrated, heated agitator for a perfectly homogeneous mass. - Controls: Digital temperature control for maximum precision in temperature management. - Hygiene: Entirely made from high-grade stainless steel, easy to clean and HACCP-compliant. - Connection: 400 V (three-phase power) for industrial performance. Condition & Maintenance: - Excellent overall condition. - Fully functional and removed from ongoing production. - No maintenance backlog – the machine has always been used carefully and properly maintained. Why this Selmi Tank? The Tank 400 is renowned for its durability and reliability. It delivers substantial time savings compared to smaller batch mixers and ensures consistently high product quality. Location: Pulheim near Cologne Important information for buyers: - Inspection and function test on site available at short notice by arrangement. - Loading with forklift can be organized on site. - Package offer: I am also selling a JM Tronic dosing scale and a Bear Varimixer AR100S. An attractive package price is possible if purchasing multiple machines!

Condition: used, Year of construction: 2014, functionality: fully functional, For sale are two identical dissolved air flotation (DAF) units for industrial wastewater treatment from the manufacturer EnviroChemie. The plant is fully installed and turnkey fitted into shipping containers. Due to its containerized design, the system is compact, mobile, and can be quickly recommissioned. It was used for industrial wastewater treatment and solids separation via dissolved air flotation, and is in used but fully operational condition. Typical areas of application include: - Industrial wastewater treatment - Food industry Hsdsyudwuspfx Aa Esfi - Surface treatment / metalworking - Chemical industry - Process water treatment Technical Data Manufacturer: EnviroChemie Plant type: Dissolved air flotation unit (DAF) Model: Lugan 3000 Year of manufacture: 2014 Condition: used, fully functional Capacity: approx. 1.5 – 3 m³/h maximum throughput Equipment - Flow measurement / valves: Endress+Hauser Promag 50 - Compressed air unit: Festo - Control cabinet with Siemens SIMATIC S7-300 controller - Operating device with display / touchscreen - 300-liter flocculant dosing tank - Agitator and dosing pump - Complete container installation (shipping container) --flotation unit, DAF unit, dissolved air flotation, wastewater treatment unit, containerized plant, water treatment, industrial wastewater--

Condition: good (used), 151 USED Device for: - dissolving sugar, - dissolving salt, - dissolving yeast. EQUIPMENT: - cooling/heating. EXTERNAL DIMENSIONS (in cm): - length: 80, - height: 185, - width: 100. INTERNAL DIMENSIONS (in cm): Hsdpfx Aaoxfh Ids Esfi - tank diameter: 70, - height: 100, - capacity: approx. 350 L. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 1978, Manufacturer: Pendraulik Model: WRV49 Year : 1978 Type : stirrer / disolver   Atex class : EExe G3 7 Motor : BBC Hjdpfx Aex R Ayuea Eefi Power : 3,6 KW Rotation: max 1500 rpm   Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Agitation shaft length: 105 mm Up/down travel: 150 mm Speed variation: mechanical

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Hjdpfjucw Tpex Aa Ejfi

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Hedpfx Aaewtg Ihs Ejfi

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Hfsdpfjvnuckex Aa Eoi

Year of construction: 2007, condition: ready for operation (used), A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible. Hfodsvtqrxopfx Aa Eji

Year of construction: 1972, condition: ready for operation (used), A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible. Hsdpfowhfn Nox Aa Ejfi

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Manufacturer: Pendraulik-Ruhrwerk Hfedpjxp Hw Ejfx Aa Eji Model: LD-50 Max 8,400 rpm

Year of construction: 2021, condition: used, 3 x Reverse Osmosis Skids High-capacity industrial Reverse Osmosis (RO) skid, engineered for advanced wastewater reclamation. Multi-train configuration delivers scalable operation and redundancy, achieving >97% dissolved solids rejection. Producing high-quality permeate suitable for demineralisation feed or cooling water reuse applications. Hsdpfxozl U N Io Aa Eefi Please note as the goods are packed the pictures shown are representative and not of actual units Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. BPDD and EUS forms can be downloaded below.

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans - Rotary accumulation table at the discharge (included, see photos) Hfodjzktv Repfx Aa Eei - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Condition Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. Hfjdpfozcmblex Aa Eji The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Hfjdpfxsyb S S He Aa Eei - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Year of construction: 2017, condition: ready for operation (used), Plastic processing machine manufactured in 2017. This Stratasys Fortus 450mc features a normal print head and an additional fully functional Nylon CF print head. It includes various build sheets and nozzles, along with partially used material canisters. Please note that the machine requires some repairs to be fully operational. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details. Hodpfx Aajzhnv Hs Esfi • Condition: Not fully operational • Humidity sensor failed and needs replacement • Machine incorrectly detects installed material; requires clearing in engineering menu • Normal print head: support material motor needs replacement • Configuration: Normal print head installed (support motor faulty) • Disassembly/transport: Top canopy removed for relocation; easy to reassemble • Software: Compatible with GrabCAD Print and Insight slicer (downloadable from Stratasys website) Additional equipment • Additional Nylon CF print head with carry box (fully functional) • Clean Station tank for dissolving support material (needs new pump; one hose broken) • Approx. 20 used and some unused nozzles • Approx. 15 canisters of partially used material • Build sheets: 4 ULTEM, 8 ABS, 7 Nylon CF

Condition: used, Stick electrode, wire electrode, welding wire -Diameter of electrode: 4.0 mm Hfodpockd D Hsfx Aa Eei -Rutile electrode: for fillet welds and horizontal V-welds -Smooth sweat appearance and self-dissolving slag. -185% metal recovery: using high-speed welding -Number: 90x packages available -Price: per package

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm Hedpeyzp Hvsfx Aa Eefi

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Agitator flange on the top -2x handle for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Hfedeh Hxxfspfx Aa Eoi Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office Hjdpfx Aaozd Tllj Ejfi X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V Hfsdjzgwzvopfx Aa Esi - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: used, Year of construction: 1985, machine/vehicle number: R88, Used COBERT filling machine for wineTechnical Specifications & Performance DataThis Cobert SUPREMA is an isobaric filling machine engineered for precise counter-pressure filling of wine. With 24 filling valves, it achieves consistent product levels and preserves carbonation and quality in both still and sparkling products. The machine architecture supports industrial packaging environments where accuracy, hygiene, and repeatability are essential for beverage production.Manufacturer: CobertModel: SUPREMAYear: 1985Speed: 3000 BPH Machine type: Isobaric filling machineFilling technology: Isobaric (counter-pressure)No. of filling valves: 24Products: Still wine, semi-sparkling wine, sparkling wineContainers: Glass bottlesLine context: Suitable for integration in a used bottling line and second hand beverage production setupsAdvanced Automation & Control SystemsThe isobaric system pressurizes each bottle prior to liquid dosing, enabling controlled product transfer and stable filling even with carbonated wines. Valve sequencing provides reliable start/stop phases, while pressure equalization safeguards product integrity. The machine supports standard operator controls for setup and monitoring, aligning with established bottling equipment practices for safe and repeatable operation.Production Line Integration CapabilitiesDesigned for seamless integration into a complete bottling line, the SUPREMA pairs effectively with upstream rinsing machines and downstream cappers, capsule application, and labeling machines. It handles standard wine bottle geometries and neck finishes commonly found in beverage production. As part of an industrial packaging or beverage production line, it can operate in-line or as a standalone filler with dedicated infeed and outfeed conveyors.Machine Condition & Maintenance HistoryManufactured in 1985, this SUPREMA reflects robust Cobert engineering suitable for long-term service in second hand bottling applications. Preventive maintenance typically focuses on cleaning and sanitation of product-contact parts, routine inspection of seals and gaskets in the isobaric valves, verification of pressure settings, and calibration of fill levels to ensure consistent performance.Operational Performance & VersatilityThe isobaric filling principle enables gentle handling of sparkling and semi-sparkling wines by matching internal bottle pressure, minimizing foaming and preserving dissolved CO2. For still wines, the controlled filling cycle supports steady flow and stable levels. Its 24-valve configuration balances throughput with careful product handling, making it a versatile choice for wineries upgrading or expanding a used bottling line with proven filling technology.Installation Requirements & Site PreparationInstallation follows standard bottling equipment practices: stable, level flooring for accurate alignment; access for cleaning and service; and suitable utilities such as electrical power, compressed air for actuators, and process water for sanitation. Prop... Hjdpezcf I Rjfx Aa Eofi