Used Es 1800/350Hl for sale (9,028)

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, loading space width: 2,550 mm, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial list of equipment. Full equipment details available upon request. Chassis: * Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header Underrun Protection: * According to EU regulations Front Landing Legs: * Landing legs with single-sided operation Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function Tires: * 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset Splashguards: * PVC, fitted in front of and behind the axles as per EU regulations Load Securing: * Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t * Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed Brake System: * Pneumatic brake system in accordance with EU regulations with EBS * Two coiled lines for connection to the towing vehicle, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame Front Wall: * Made from 25 mm side wall, removable Lighting System: * Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holder * Removable beacon at the rear * Supplied with an additional 40 mm towing device (GVW max. 13,500 kg) Painting: * Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards Hodpfjy Auhbjx Agmsnn * Body parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Side walls: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Attachments: galvanized / KTL black Conspicuity Marking: * According to EU, yellow on sides and rear Including Special Accessories: * Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053 * 4 rows of crosswise stake pockets on the loading platform, evenly distributed * 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Hnedsy Auhzepfx Agmjn Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Hnsdpfxeyz E T Se Agmen Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear Hnsdpfx Agswx Dctsmsn * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Hsdpoun Nvbofx Agmsnn

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights Hnjdpfsw U H Sbjx Agmon * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, Year of construction: 2007, Turning diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Turning diameter over bed slide 230 mm Travel x1 165 mm Travel z1 700 mm Travel x2 190 mm Travel z2 720 mm Travel -y axis +/- 50 mm Main spindle bore 76 mm Main spindle speed 5.000 U/min Main spindle drive 22 kW Max. torque on the spindle 208 Nm Sub spindle bore 76 mm Sub spindle speed 5.000 U/min Sub spindle drive 22 kW Max. torque on the spindle 208 Nm Tool turret 2 x 12 Stat. Number of driven tool stations 2 x 12 Speed of driven tools 5.000 U/min Max. torque 47 Nm Work piece power 5,5 kW C-axis resolution 0,001 ° Rapid traverse x + z axis 20 / 40 m/min Rapid traverse y-axis 7,5 m/min Total power requirement 68,4 kVA Included Bar feeder, Tools and driven tools. Hnsdjzdrppjpfx Agmen

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Condition: used Hnodpfjzdr Edjx Agmjn Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 12,000 kg, fork length: 1,800 mm, Forks Load center: 600 Fork width: 250 mm Fork thickness: 65 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: LOAD STABILIZER, The Load Stabiliser Hnsdjzdlrwspfx Agmen LOAD STABILIZER, The Load Stabiliser

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system Hsdpfxjzddp Ae Agmenn temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Hnedpozc N A Sjfx Agmsn Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. Hnjdpfx Ajikvdqogmon with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Condition: ready for operation (used), Year of construction: 2006, spindle bore: 130 mm, turning length: 600 mm, turning diameter: 1,800 mm, Turning diameter 1800 mm Turning length 600 mm Control Siemens 840 D Powerline 6-jaw chuck Spindle bore 130 mm Spindle nose DIN 55027 size 11 Spindle speed range 1 - 400 rpm Spindle torque 9000 Nm Total power requirement 38 / 52 kW Hnedpsy Aw Svsfx Agmjn Machine weight approx. 25 t

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1 h, load capacity: 240 kg, lifting height: 5,600 mm, empty load weight: 920 kg, construction height: 1,620 mm, fuel type: electric, total length: 1,440 mm, drive type: Elektro, construction width: 760 mm, Scissor lift Mast type: None Technical condition: very good Front tire type: Superelastic Front tire condition: 100% Rear tire type: Superelastic Rear tire condition: 100% Description: New, load capacity: 240 kg, load capacity (extended): 100 kg, max. number of people (indoor/outdoor): 2/1, working height: 5.60 m, working platform height: 3.60 m, overall length: 1.44 m, overall width: 0.76 m, overall height (guardrails extended): 1.99 m, transport height (guardrails folded): 1.62 m, working platform length: 1.29 m, platform width: 0.70 m, platform extension: 0.60 m, ground clearance (stowed): 6 cm, ground clearance (raised): 1.50 cm, wheelbase: 1.05 m, drive: electric drive, turning radius (indoor): 40 cm, turning radius (outdoor): 1.55 m, travel drive: 2x24VDC/0.4kW, lifting drive: 24VDC/1.2kW, speed (stowed): 4 km/h, speed (extended): 0.60 km/h, battery capacity: 24 V/85 Ah, integrated charger: 24V/10A, climbing ability: 25%, max. inclination: 1.5°/3°, non-marking tires: 230x80 mm, weight (CE): 920 kg Hnjdozc Ahuopfx Agmsn Impulse control, CE certificate

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Hnodszc Ahnjpfx Agmon Mast type: None Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Hnsdpfozc Ahhsx Agmjn Mast type: None Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Technical condition: New Front tires type: Solid rubber Hodpfx Aezc Ahbjgmenn Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Hjdjzcv S Hjpfx Agmjnn Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427548, power: 1 kW (1.36 HP), load capacity: 230 kg, mast type: telescopic, lifting height: 5,800 mm, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,415 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 2,140 mm, fuel type: electric, color: red, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Hodpfx Agoyqzdkemjnn Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Load capacity: 230 kg Load capacity when extended: 113 kg Max. persons: 2 Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.14 m Max. gradeability: 25% Travel speed: 0.8 km/h - 4.5 km/h Drive motor: 24 V / 1 kW Lifting motor: 24 V / 2 kW Total weight: 1,415 kg General used condition, fully functional

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427478, power: 0.5 kW (0.68 HP), load capacity: 230 kg, mast type: telescopic, lifting height: 5,800 mm, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,630 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 2,150 mm, fuel type: electric, Equipment: UVV, all wheel drive, Technical Data Hodoyqzf Uopfx Agmonn Year of manufacture: 2020 Motor: Electric Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.15 m Drive system: 2 x 24 VAC / 0.5 kW Lifting drive: 24 VAC / 3 kW Max. load capacity: 230 kg Travel speed: 0.6 - 4.5 km/h Max. gradeability: 25% Motor: Electric 0.5 kW Weight: 1,630 kg All-wheel drive Fully operational, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427448, load capacity: 230 kg, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,415 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 1,820 mm, fuel type: electric, color: red, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Hjdpfx Aeyqzf Isgmonn Load capacity: 230 kg Load capacity when extended: 113 kg Max. persons: 2 Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.14 m Max. gradeability: 25% Travel speed: 0.8 km/h - 4.5 km/h Drive motor: 24 V / 1 kW Lifting motor: 24 V / 2 kW Total weight: 1,415 kg General used condition, fully functional

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427368, power: 1 kW (1.36 HP), load capacity: 230 kg, mast type: telescopic, lifting height: 5,800 mm, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,415 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 2,140 mm, fuel type: electric, color: red, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Load capacity: 230 kg Load capacity when extended: 113 kg Max. persons: 2 Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.14 m Hnsdpfxsyqzddj Agmsn Max. gradeability: 25% Travel speed: 0.8 km/h - 4.5 km/h Drive motor: 24 V / 1 kW Lifting motor: 24 V / 2 kW Total weight: 1,415 kg General used condition, fully functional

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427348, load capacity: 230 kg, lifting height: 10 mm, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,415 kg, empty load weight: 1,560 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 1,830 mm, fuel type: electric, tire size: 3045 x 100, wheelbase: 2,290 mm, color: red, Equipment: UVV, Technical data Year of manufacture: 2021 Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Load capacity: 230 kg Load capacity extended: 113 kg Max. persons: 2 Hodpsyqywvofx Agmsnn Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.14 m Max. gradeability: 25% Travel speed: 0.8 km/h – 4.5 km/h Drive system: 24 V / 1 kW Lift motor: 24 V / 2 kW Total weight: 1,415 kg General condition: normal used condition, fully functional

Condition: ready for operation (used), Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm Hnedpfjvpr N Rex Agmsn 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: like new (used), Code: 0406 Brand: SCM MINIMAX Model: T55 ES - CE Standard Spindle moulder with long table for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics, composite materials and various – CE Standard – Year 2023 Technical specifications: Shaft diameter 35 mm Shaft length 125 mm Shaft rotation speed rpm 3500/6000/8000/10000 Max tool diameter 240 mm Motor power 6,6 Hp Spindle unit adjustment handwheels positioned on the front of the machine Gravity indicator on the spindle lifting handwheel Side extensions and telescopic front roller extension for a support of 2500 mm Spindle rotation reversal Hnodpfx Agezcqrnemon Spindle speed display by LED lights Adjustable spindle guide Electrical installation for automatic feed Extraction hood inlet diameter 120 mm Overall dimensions mm 2550 x 900 x 1150 h Weight kg 348