Used Eht Plate Shear - Hydraulic for sale (26,267)

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm Chodpfx Aeimq A Iolbsb - Cutting angle, hydraulically adjustable 0.5 - 3° - Cutting gap adjustment, hydraulic - Number of hydraulic clamping cylinders 22 pcs - Motorized backstop with positioning control 10 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 strokes/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - includes: - Electronic foot switch - Cutting line illumination - Sheet metal lifting system, pneumatically assisted

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Csdpfexgtq Tox Albshb Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: Chsdpfx Alox A Tpnebjb – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Cedsy Ig R Ejpfx Albshb Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute Chedszr Rqnopfx Albeb - 1x movable foot pedal - operating manual

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t Chedpfovh Ivkex Albsb dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm Codpfjxab Tvex Albjhb 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm Cedpfx Aotv Ihqslbehb no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 607697782, Offer 23220 Technical Data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.3 - 3° - Manual adjustment of the cutting gap - Number of hydraulic clamping cylinders 17 pcs Chsdpfx Ajzqdcbslbeb - Motor-controlled rear stop 20 - 700 mm - Front angle stop + support arms - Stroke rate depending on the cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height approx. 900 mm - Space requirement including rear stop, without front support arms - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - Including: - E-foot switch - Cutting line illumination - Cutting length preselection via potentiometer - Machine rear with light curtain safety

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks Codpsxaa Dgsfx Albjhb * Optimal positioning of thin sheet metal

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, Chjdpfxeznngxs Albjb * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm weight of the machine ca. 4 t Chsdelp U Txspfx Albob dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: used, Year of construction: 1989, sheet width 2500 mm plate thickness 12,5 mm distance between columns mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Csdpfx Aljt Hwr Iobehb Width of metal, max. 2,500 mm Metal thickness, max. 12.5 mm Weight, approx. 19,000 kg Drive 40 kW Equipment / Special Features: Adjustment of cutting gap. Hydraulic blank holder. Automatic arrester adjustment for cutting blanks. Program input and piece number input. Transportation device for blanks. Stacking device. This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest.

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 6 mm distance between columns 3460 mm table height 800 mm 0 220 bar cutting angle adjustment 0,5x3 ° down holder 18 back stop - adjustable 750 mm Cedpfxeynbc Uo Albshb front stop - adjustable 1000 mm main drive 7,5 kW oil volume 300 l total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop

Condition: used, Year of construction: 1995, sheet width 6500 mm plate thickness 3 mm back stop - adjustable 1000 mm dimensions 7300x2400x2300 mm Weight 20000 kg Equipment/accessories: - 1 x set of knives Csdpfeyyc Auex Albehb

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge Cedpfx Ajuagxpslbshb - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. Chsdpfey S D Nmsx Albob including flat belt conveyor

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: Cedoxabvqopfx Albjhb - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch Chodpfx Aod Hxx Aolbsb - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display Csdpfxsxaaghe Albehb * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Chedpfxoxn Rhrs Albeb Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: used, Year of construction: 1980, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Codpsg Twmhefx Albohb Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° Chjdpfx Aleu Rni Hsbsb cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1985, sheet width 1000 mm plate thickness 5,0 mm distance between columns 1100 mm 1010 mm Cutting length variabel mm Cjdpszhn Ucofx Albshb cutting gap adjustment variabel mm connected load 5,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 1,6 x 1,7 m Hydraulic guillotine shear with - Cutting gap adjustment - Support arms - Squaring arm

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 32231, control type: CNC control, sheet thickness (max.): 6 mm, LVD MVS 6/4050 Guillotine Shear / Sheet Metal Shear – Year of Manufacture 2008 Cedpfxeywpkae Albshb For sale is a robust and reliable guillotine shear from the renowned manufacturer LVD. Technical Data: Manufacturer: LVD Company n.v. Model: MVS 6/4050 Year of Manufacture: 05/2008 Maximum Cutting/Pressing Force: 197 kN Max. Sheet Thickness / Capacity: approx. 6 mm (typical for the model, depending on material) Working Length: approx. 4050 mm Max. Force: 10,000 daN Connection: 400 V / 50 Hz Power: 10.1 kW Description: The machine is in good used condition and is fully functional. It is ideally suited for precise cutting operations in steel and metal construction as well as industrial sheet metal processing. Its solid construction ensures high cutting quality and long service life. Features / Highlights: Industrial design High cutting accuracy Easy to maintain Proven LVD quality Fields of Application: Metal construction Sheet metal processing Workshops & production Viewing by appointment. The machine is currently inbound from England. Export, import, and transport can be arranged by us for an additional fee.