Used Dugard V20-5 for sale (59,272)

Condition: used, mileage: 854,993 km, power: 220 kW (299.12 HP), first registration: 05/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a contract is concluded, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (49+101+1+2 emergency seats) (Vehicle 736) Registration date: 05/29/2009 854,993 km Engine: 11,967 ccm Tjdpfx Asz H Ed Ajmrsc 220 kW / 300 hp Euro 5 EEV MOT valid until 03/2027, technical inspection valid until 09/2026 Permissible total weight: 29,000 kg, unladen weight: 16,780 kg, payload: 12,252 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 90%, center approximately 50/50%, rear approximately 90/90%, rear approximately 60/60%, rear inside approximately 40/40% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Retarder activated via the brake pedal Fully automatic transmission Microphone Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater LAWO system via cash register ISRI driver's seat with heating + ventilation 49+101+1+2 emergency seats Emergency exit 12-volt socket Frame with some signs of rust 06/26/2024: Tie rod on the right side replaced 08/06/2024: Door 3 pressure wave switch replaced 12/16/2024: Alternator belt tensioner replaced, front axle brake pads + discs replaced, C-axle brake pads replaced, right-hand side C-axle caliper guide + combination cylinder replaced, left-hand side C-axle brake cylinder replaced 01/28/2025: Coolant expansion tank replaced 06/20/2025: Cylinder 1 exhaust manifold screw replaced 12/03/2025: Hose to the water pump replaced, steering hose replaced 12/16/2024: Diagonal arm on the left C-axle replaced 12/12/2025: Right-hand side C-axle position sensor + bracket replaced, ECASD calibrated 12/03/2025: Tie rod on the left side replaced, air spring on the B-axle right front + air spring on the C-axle left rear replaced, B-axle left and right brake caliper guide and brake pads replaced 06/06/2026: Axle trunnion cover on the front axle left upper replaced Various signs of wear and tear, consistent with age Last inspection on 03/06/2026 at 840,000 km, next inspection at 900,000 km, next inspection at Price: 10,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. For both parties, the place of jurisdiction for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 950,838 km, power: 210 kW (285.52 HP), first registration: 12/2007, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until completion of the sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 123) First registration: December 28, 2007 950,838 km Engine: 6,374 cc 210 kW / 286 hp Bluetec 5 Next inspection: 09/2026, TÜV (technical inspection): 12/2026 Permissible total weight: 19,000 kg, unladen weight: 10,880 kg, payload: 8,120 kg Tires: 275/70R22.5, front approx. 80/60%, rear approx. 40/40% Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Double doors at the front and rear Driver's cabin with door Ramp Fully automatic transmission Microwave Electric windows 2 x electric + heated mirrors Auxiliary heater + 2nd heater Tsdpfx Amez H Edcjrec Retarder Stop brake LAWO Mobitec ICU 400 38 + 2 emergency seats + 60 standing places + 1 KIWA seat Emergency exit 12-volt socket Wheel arches are rusty June 28, 2024: Oil pan gasket replaced, compressor hose replaced; July 1, 2024: Valves on the transmission replaced; December 3, 2024: Pressure regulator of the air system replaced; December 18, 2025: Door flange sealed Last inspection on September 17, 2025 at 924,499 km, next inspection at 984,499 km Various signs of wear and tear, commensurate with age Price: 3,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the Ludwigslust District Court for disputes up to a value of €10,000, and the Schwerin Regional Court for disputes exceeding this value. Subject to errors, typos, and prior sale.

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Tsdpfx Aszzxa Aemrsc Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control, Tsdpfx Ajz E Ayxjmrsc 5 axes, powered tools, tool changer spindle, tool magazine.

Condition: new, functionality: fully functional, input voltage: 400 V, input current: 418 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, continuous power: 250 kW (339.91 HP), Equipment: type plate available, Exact model designation: Schneider MX pro 4V200/250 Output power and output current: 250kW | 481A MP4C20BAA ° NEW in original packaging, opened! ° Formed! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Todpfx Aoy Uggmsmroc Only 2 units left in stock!

Condition: used, Year of construction: 2002, The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description: Features: - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line. - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types. - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards. - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput. - Versatile: Can handle various liquid types, from water to thicker, more viscous products depending on configuration. Applications: - Commonly used in the beverage industry for filling soft drinks, juices, and other liquids. - Suitable for pharmaceutical products requiring strict filling standards. - Used in cosmetics for lotions, shampoos, and other liquid products. Benefits: - Streamlined production process reduces handling and transfer times. - Improved accuracy in filling minimizes spillage and product waste. - Enhanced product shelf life due to airtight sealing. Dawson Debagger, which is suitable for 250ml bottles. We used to use the NAMPAK type (50mm x 50mm square), and 2 bags would fit width ways. A total of 6 bags could go on the bed at any one time, meaning a capacity of approximately 1500 bottles. We added a special air operated "gate" to the end where the dogchain is, which was for using PET bottles. As the PET bottles were smooth, they tended to stick together - so the function of the gate was to separate the row of bottles that was about to be swept by the dogchain from the rest of the bottles on the bed,. It worked very well, so we also used it for the HDPE bottles. The overall length is around 4.5m, and the width of the bed is I think 1200mm, with the widest part of the machine at about 1.8m. It runs on single phase power (16a, blue plug or hard wired) and has a variable bed speed setting. Speed: 0-8000 b/hr Depending on Volume Type: Monoblock CIP: Ring for connection Tsdpfx Amoz Ht Icjrjc Cap Feeder: Included Automation: Authentic Fogg controls Filling Heads: 18 Capping Chucks: 5 Cap Type: 38 mm Bottle Type: square Labeller: Graham Labeller Debagging Table: Dawson Included Collection Table: Included Conveyors: 13 meters and bends Bottle Rinser: Included Available: Immediately

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. Tsdpfx Amez Hifdsrjc A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2017, operating hours: 1,000 h, condition: used, functionality: fully functional, Probat Probatone 5 MK2, manufactured in 2017. The machine was ordered from Probat in 2017, installed in 2018, and used in production until the summer of 2024. It comes with an optional drum speed control and a pilot roasting system (for automatic roasting). A temperature probe for measuring exhaust temperature is also included, which works with a USB stick and a third-party plug-in. Both bean and exhaust temperatures can be viewed in software such as Artisan. The machine has been cleaned and serviced according to the Probat maintenance schedule. After being removed from production, the machine was fully cleaned and serviced, including disassembly and cleaning of the cyclone, lubrication of the bearings, and cleaning of the electrode. Todez E Rfijpfx Amrjc Important: The machine has less than 1000 production hours, as indicated on the screen counter. After being removed from production, the machine was used for a few test runs in the summer of 2025. It is in full working condition but has a few scratches on the paint, as shown in the pictures. It is possible to test the machine on-site, and assistance can be provided with transport arrangements.

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control Heidenhain 4. axis electronical hand wheel Tsdpfex U Sd Rox Amrec 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1200x450 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), mileage: 419,229 km, power: 177 kW (240.65 HP), first registration: 06/2010, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 5,210 mm, loading space width: 2,490 mm, loading space height: 2,170 mm, Year of construction: 2010, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Air horn - Aluminum fuel tank - Radio/CD player - Side door - Sun visor - Tailgate - Toolbox Tjdpfx Amoz Icxaorec = More information = General information Number of doors: 2 Cab: single Registration number: 1CYF495 Technical information Engine capacity: 7.146 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 6.400 kg Carrying capacity: 7.600 kg GVW: 14.000 kg Functional Tail lift: dhollandia DHLM 35, tail lift, 1500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min Tjdpsxxkh Tsfx Amrec - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: used, Year of construction: 1998, Technical details: sheet width: 2540 mm plate thickness: 5,0 mm distance between columns: - mm rated current: 28,91 A total power requirement: 13,52 kW control voltage: 230 V Tsdpfx Asz Hixqomrjc connection voltage: 400 V upper bending cheek adjustment: 350 mm knife length: 2540 mm bending angle max.: 135 ° Weight approx.: 5950 kg dimension machine approx.LxWxH: 3,81 x 2,80 x 2,05 m

Condition: used, mileage: 958,238 km, power: 210 kW (285.52 HP), first registration: 12/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü (41+44+1+2 emergency seats), fully air-conditioned (Vehicle 727) First registration: 05.12.2008 958,238 km Engine: 6,374 ccm 210 kW / 286 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 02/2027 Permissible total weight: 19,000 kg, unladen weight: 11,960 kg, payload: 7,040 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 40/60%, rear approximately 40/40% Single door at the front, double door at the rear Driver's cab with door Tedpfxoz H Ecxo Amroc Ramp Fully automatic transmission Microphone 2 x electric and heated mirrors Fully air-conditioned Auxiliary heater + 2nd heater Stop brake 41+44+1+2 emergency seats Emergency exit 12-volt socket Chassis with slight rust 07.02.2024: ECAS height sensor, rear axle, right side, new 03.05.2024: Handbrake valve, new 24.07.2024: Front axle, brake disc + pads, new 13.05.2024: Steering knuckle, front axle, left side, new 24.07.2024: Crankshaft oil seal, transmission side, new 18.09.2024: Upper triangular arm, front axle, right side, new 07.10.2024: Lower triangular arm, front axle, right side, new 08.04.2025: Front axle, left side, 2 x triangular arms + bearings, new 22.04.2025: Pressure regulator/air dryer, new 13.05.2025: Belt tensioner + V-belt, air conditioning, new; air conditioning refilled, actuator, flap, roof, right side, new; wheel brake cylinder, rear axle, right side, new 09.07.2025: 2 x condenser fan, new 05.08.2025: Coolant reservoir, new; 2 x alternator, new 12.05.2026: Front axle, right side, air spring, new; rear axle, right side, shock absorber, new + shock absorber mount, new; Haldex valve, overhauled 03.08.2026: Brake caliper, front axle, left side, new Various signs of wear, consistent with age Last inspection on 05.08.2025 at 913,055 km, next inspection at 973,055 km Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Todpfx Ajvvkipsmroc

Condition: used, mileage: 1,092,639 km, power: 220 kW (299.12 HP), first registration: 06/2012, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, parking heater,

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Tsdpfxjvvi N Ie Amrsc

Condition: used, mileage: 707,405 km, power: 210 kW (285.52 HP), first registration: 04/2009, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 127) First registration: 04/02/2009 707,405 km Engine: 6,374 cc 210 kW / 286 hp BlueTec 5 MOT valid until 01/2027, technical inspection valid until 04/2027 Permissible total weight: 19,000 kg, unladen weight: 10,750 kg, payload: 8,250 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approx. 80%, rear approx. 30/30%, inner rear approx. 40/40% Double doors at the front and rear Driver's cabin with door Ramp Fully automatic transmission Microwave Electric windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Retarder Stop brake LAWO Mobitec ICU 400 Todpfx Ajz H Ed Njmroc 38 + 2 emergency seats + 60 standing places + 1 wheelchair space Emergency exit 12-volt socket Frame members rusted 02/01/2024: water pump replaced, 04/11/2024: water filter insert replaced, 04/16/2024: air-hydraulic pump replaced, 10/21/2024: rear axle, left and right brake calipers replaced, 10/24/2024: front axle, right, upper control arm replaced, front axle, left, bearing of upper control arm replaced, rear axle, left, upper cross brace replaced, thrust rod replaced, 01/10/2025: 4-way valve replaced, 01/13/2025: front axle, left, brake caliper replaced, front axle, left, brake chamber replaced, 01/18/2025: compressor hose replaced, 07/14/2025: front axle, left, brake hose replaced, 07/15/2025: tie rod, left, replaced, 07/17/2025: water box replaced, oil pan gasket replaced, 01/28/2026: rear axle, right, spring accumulator replaced, brake caliper disc replaced, 01/29/2026: front axle, left, upper control arm replaced incl. bearing, front axle, right, air spring replaced, 02/02/2026: exhaust manifold gasket replaced, 06/09/2026: front axle, left, air spring replaced, 07/09/2026: rear axle, brakes replaced, retarder solenoid valve replaced Various signs of wear and tear, commensurate with age Last inspection on 07/08/2025 at 664,273 km, next inspection due at 724,273 km Price: 5,000.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, mileage: 808,110 km, power: 210 kW (285.52 HP), first registration: 04/2009, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 128) First registration: 02.04.2009 808,110 km Engine: 6,374 ccm 210 KW / 286 HP Bluetec 5 Inspection due: 04/2027, TÜV (technical inspection) due: 10/2027 Permissible gross vehicle weight: 19,000 kg, unladen weight: 10,750 kg, payload: 8,250 kg Tsdjz H Eb Uepfx Amrsc Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approx. 80/60%, rear driven axle approx. 80/80%, rear non-driven axle approx. 70/70% Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Electric windows 2 x electric + heated mirrors Auxiliary heating + 2nd heater Retarder Station brake LAWO Mobitec ICU 402 38 + 2 emergency seats + 60 standing places + 1 wheelchair space Emergency exit 12-volt socket Chassis components rusted 08.01.2024: Retarder solenoid valve new, 16.01.2024: Drain valve + air dryer cartridge new, 22.01.2024: Pressure regulator + drain valve line new, 22.04.2024: 4-way valve, pressure regulator solenoid valve new, 26.06.2024: Pressure regulator + air dryer cartridge replaced, 04.12.2024: Axle modulator new, 14.10.2024: Front axle, right side, new shock absorber, 25.04.2025: AT transmission at 751,660 km, 15.05.2025: Axle modulator new, 14.07.2025: Rear axle, right and left, upper stabilizer bar new, 23.04.2026: Water box new, 4-way valve new, pressure regulator adjusted Various signs of wear, consistent with age Last inspection at 751,660 km on 25.04.2025, next inspection at 811,660 km Price: €5,000.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand Todjt S Rduepfx Amroc 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: used, functionality: fully functional, Equipment: CE marking, type plate available, Used Colortronic material dosing system with control cabinet, 5x CSK 5 vacuum receivers, small mixer unit, 30 pieces of aluminium pipes – 6 m length, diameter 50 mm, bends made of stainless steel, mixing station. Tedpfsy Smg Ijx Amrjc

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Tedpfx Amez H Ecrersc Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Tjdpfx Asz H Ecfsmroc Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, Markator MV5 VU4 marking system with operator display ZE101, Nadler labeling machine. Shipping costs upon request. From stock (may show signs of storage). Condition as shown in the pictures. Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Tsdpfoz Hxxmox Amrjc Information regarding bank details, payment terms, etc. will be sent to you by email.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Tedpfsz Erwtjx Amrsc Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Tsdpfx Aezukuremrec Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.