Used Colchester Alpha 1350Xt for sale (311)

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Type: Tornado 100 Max turning diameter: 420 mm Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm Bwedpfx Aey Atq Ijl Nen 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Year of manufacture: 1995 Incl. tool holder Excl. tools

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Bwodpfx Aey E S D Ejl Nsn

Condition: good (used), Colchester Tornado 100 CNC Lathe - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg - Turret with 12 stations - VDI 3425 / 30 tool holders Bwodpfx Aey Einhsl Nen Hydraulic collet and chuck

Condition: used, Year of construction: 2010, swing dia. 440 mm Bwsdpfx Aovzcpljl Non max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Bwsdpfx Aew Uigujl Non Technical details shown on picture.

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Bedpfx Alsww Irio Njwn Technical details shown on picture.

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Parts shown by hand not come. Bsdpfx Aoww Haxel Newn

Condition: used, machine/vehicle number: 1457, Outer-Ø: 205 mm Height: 59 mm Bwjdpfx Alob Nxhmj Nsn Camlock receptacle DIN 55029: size 3

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, turning diameter: 433 mm, turning diameter over bed slide: 433 mm, turning diameter over top slide: 267 mm, turning length: 1,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, Turning diameter in gap: 711 mm, Colchester Mascot 1600 Gap Bed Lathe Model: Mascot 1600 Swing Over Bed: 433mm Swing Over Top Slide: 267mm Swing in Gap: 711mm Distance Between Centres : 1000mm Spindle Speeds: 20-1600 RPM Spindle Bore: 76mm Bedoyt Nfhspfx Al Nswn Machine with: 3 – jaw chuck Ainjest Threading Attachment Fixed Steady Quick Change Toolpost with holders Digital Readout High Speed Threading

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. Bjdpfx Ajx Hrumel Newn The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: ready for operation (used), lathe Colchester Master Bwedpfxsd Hdqvo Al Njn

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm Bsdpfew S E R Rex Al Njwn • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Bedpfx Asymd Iwsl Newn

Condition: used, functionality: unexamined, Ferwood Code: RU0011686 - Manufacturer Code: SP075-MF1-10-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service; please contact us. 3KG 20X20X20 Bodpfxjymd Iks Al Njwn

Condition: used, functionality: unexamined, Ferwood Code: RU0011867 - Manufacturer Code: SP075-MF2-20-121-000 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 4KG 36X26X21 Bedjymd Ecepfx Al Newn

Condition: used, functionality: unexamined, Ferwood Code: RU0011864 - Manufacturer Code: SP075S-MF1-10-1C1-2S - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service. Please contact us. 3.5KG 20X20X20 Bjdpfsymd Ausx Al Nswn

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) Bwedpfjrbm T Dsx Al Nen -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition. Bwjdpfjdzqptsx Al Nsn

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Bwodpfx Aloq Atxyo Njn Interlocked guarding  

Condition: used, Year of construction: 1992, turning diameter over bed 350 mm Bodjyqvxpepfx Al Nswn turning diameter over slide rest 196 mm turning length 1250 mm turning speeds 3250 U/min bed width 350 mm total power requirement 7,5 kW dimensions of the machine ca. 4x1,5x1,5 m - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Bwsdpfx Ajypud Usl Nen

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Bwjdev I Ddqjpfx Al Nsn Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys Bwjdpfjq N Ay Asx Al Nsn New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Bwodpfx Aenr Nl Sol Njn Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: new, grinding height: 150 mm, height adjustment type: mechanical, total height: 1,450 mm, total length: 1,800 mm, total width: 1,400 mm, overall weight: 850 kg, Equipment: CE marking, Structuring and Sanding Machine / 4-Side Brushing Machine Manufacturer: Alpha Brush Model: LS-TSB Versatile brush sanding machine equipped with a total of 6 brush units for 4-sided sanding and structuring of wood materials such as panels, solid wood flooring, scaffolding boards, facade boards, etc. Working width: 300 mm Workpiece height clearance: 150 mm Equipped with: - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x left-side brush unit, 1.1 kW - 1x right-side brush unit, 1.1 kW Infinitely variable speed control for each brush group (top, bottom, sides) Brush diameter: 260 - 300 mm Quick-change system for brush heads Spring-mounted pressure roller, individually height adjustable Feed rate infinitely variable, approx. 2 - 20 m/min., 0.75 kW Bedpfoykh Tfsx Al Nown Digital display for settings Recommended extraction capacity: 3000-3500 m³/h Voltage: 400 - 480 V, 3 Ph, 50/60 Hz Protection: 32 A Dimensions (LxWxH): approx. 1800 x 1400 x 1450 mm Weight: approx. 850 kg