Used Carpigiani Tre B/P for sale (66,885)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Bwodpfxewbp Nwe Amrju Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: used, Year of construction: 2019, operating hours: 640 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Donaldson extraction system, 5.5 kW Bsdpfx Asz Dr Rdemrowu The machine is being sold due to the purchase of a laser cutting system.

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 16,418 h, load capacity: 7,000 kg, lifting height: 5,500 mm, free lift: 700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,900 mm, fork carriage width: 1,600 mm, fork length: 1,400 mm, empty load weight: 11,800 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,250 mm, Side loader Load center: 700 Bwsdpfx Aez Ifpbsmrsu ISO class: FEM 4 B Mast type: Telescopic Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 32x12.1-15 (30%) Rear tire size: 2 x 32x12.1-15 (30%) Battery year of manufacture: 2005 Additional single hydraulic circuit, cabin with heater, dust protection, pivoting fork carriage (hydraulic), table height: 900mm, table width: 1400mm, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the front.

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK Bedpjukwatefx Amrewu - 5-Axis - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 2011, fuel type: diesel, Lifting capacity: 1.000 kg Please contact Gebrauchtgeräte Center for more information Bwodpjzi Ngcsfx Amrju

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Bodpfxsxw T Tpe Amrjwu Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: used, functionality: fully functional, machine/vehicle number: G1X337N00257, Year of construction: 2003, operating hours: 7,557 h, load capacity: 3,500 kg, lifting height: 6,400 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Chassis number: G1X337N00257 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Linde E 35 P, No.: R036, Year of manufacture: 2003, Operating hours: 7,557 h, Load capacity: 3,500 kg, Lifting height: 6,400 mm, Mast: Trilex, Battery: 80 V, Equipment: Side shifter, Fork positioner, 3rd and 4th valve. Charger available upon request. Fast and uncomplicated transport possible after consultation! This advertisement serves only to identify the device! A detailed description of the condition and possible equipment will be provided individually upon request! Errors and prior sale excepted. Sale only to commercial businesses. Every sale of used goods is made with the exclusion of warranty and/or guarantee. If you have not found the right device, please contact us. We have a large selection of other devices in stock. Side shifter, fork positioner, Bwjdsz H Dngjpfx Amrju 3rd valve, 4th valve.

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Bwedpfx Ajx Dcpgomreu

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Bwodpfx Amofi Tg Hjrsu No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), -Dimensions: 430x730x1565 mm Bodpewxu Slsfx Amrewu -With pump -Hourly output: 40 L -Flavor: 1 -Voltage: 380 V / 50 Hz -Power: 1.6 kW -Condenser: air or water -Manufacture date: 17/7/2002 -Quality 828 -Serial number: IC 5879 -Software version: AESMD 36 -Net weight: 200 kg

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 1.000 kg Bwedozi Nf Sopfx Amrju Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2012, TREIF Falcon Hybrid Portion Cutter – 2012 For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system. The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery. The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision. Key Features - Year: 2012 - Complete system including infeed weigher and checkweigher with automatic reject - Recently serviced - Excellent working condition - Immediately available Bjdpfxeyux Eao Amrowu Typical Specifications - Maximum cutting capacity: up to 550 cuts per minute - Maximum product cross section: approx. 260 × 155 mm - Maximum product infeed length: up to 1000 mm - Installed power: 11.7 kW This machine is ideal for meat processing plants requiring precise weight portioning with integrated quality control. Price: On request Location: The Netherlands Availability: Immediate For more information, photos, or a video of the machine in operation, please contact us.

Condition: used, Year of construction: 2006, x-travel 800 mm Bwedpfx Ametqmmzersu y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 60 pos. tool taper HSK A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,0 x 6,5 x 3,2 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-axis simultaneous - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Bwodpfoz H Dwnex Amreu Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 1.000 kg Please contact Gebrauchtgeräte Center for more information Bwsdpfxjzf Anle Amrju

Condition: used, TECHNICAL DETAILS Bwedpfx Asug U Thsmrju Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V]

Condition: used, mileage: 200,000 km, power: 427 kW (580.56 HP), first registration: 01/2008, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, Equipment: air conditioning, * Scania R580 roll-off tipper with de-icing unit for airport use! Bwedjyq Azqjpfx Amreu * First registration 2008 * 200,000 km * Euro 3 * Automatic climate control * Retarder * Automated manual gearbox with clutch * Leaf-leaf suspension * 6x4 axle drive * Meiller roll-off body * Wheelbase: 4.75 m Küpper Weisser spreading/de-icing unit for runways* mounted on roll-off frame * Year of manufacture: 2010 * Spreading width: 3.5 m–45 m * At 45 m spreading width -> 31 m boom width * Full-wet spraying system * VPAD control unit * Own Hatz 4-cylinder diesel engine * Unladen superstructure weight: 6,880 kg * 7 tanks: approx. 2.0 x 0.67 x 1.35 m * Total tank volume: approx. 12,000 L

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side Loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Bwedpoz Ev U Njfx Amrou Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Air Front tire size: 27x10-12 Rear tire type: Air Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this HT5KU. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our location. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Bedpozt Twtefx Amrowu Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) Bedpfx Asnzhxqjmrowu 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 SEW Eurodrive K127 UV2001.4 Bwjdpfx Aey Ukq Asmrou

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Bwsdpfx Amezv Nlxoreu

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Bwedpfxsz Ehvxs Amrsu

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Bodpfxjzk Dxis Amrswu Insert belt

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. Bwjdpoy Ekncefx Amrju GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.