Used Butzer - E.v.r. Ess for sale (10,847)

Condition: good (used), We are selling a TIG welding machine ESS TIGARC 300 Rsdpfeu Sr Upsx Adrow

Condition: used, Ess pulsarc 350 welding machine with DVK 400 wire feeder Including 1 new spool of welding wire Good condition Year of manufacture unknown Manufacturer: see photo Condition: used but in good condition Offer aimed at businesses, dealers, public and religious institutions! Technology/item can be inspected by appointment. Rjdpfjwqdx Ejx Adrew Various trolleys, wire mesh boxes, forklifts, and other industrial trucks are in stock. (Photos similar)

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2, First registration: 06/30/2026. New tractor with dealer pre-delivery registration. Standard equipment / technical data: Engine, Rated power (ISO) 82 / 110 kW/hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - single-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-sensing reversing shuttle, 4-stage load shifting, Permanently cooled wet disc clutches with independent lubrication system, Dual-speed PTO: 540 / 540E / 1000, PTO switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / Lift: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single/double acting, MR + 1x single/double acting, NL, SST, Quick coupler Cat. 3 with balls and catch baskets Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lift struts on both sides and 2 lateral stabilizers, EHR with external control on both fenders. Electrical equipment: Thermo start, 120 A alternator, Battery disconnect switch (electrical), Power supply (12 Volt) for external devices with plug. Rjdpfx Adeyvmq Ijrew Axles / Additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Height-adjustable automatic trailer hitch, Fenders, external width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Driver's seat: Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver's seat with armrests, swivel adapter, safety belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplings, 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Co-driver/passenger seat with belt, Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter & armrests, Rear window wiper/washer system, Battery.

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,260 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/55R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 11.340 kg Carrying capacity: 23.660 kg Rodjuc Ebzepfx Adrow GVW: 35.000 kg

Condition: good (used), Ring variable transformer, transformer -Primary: 230 V 2.0 A 50-60 Hz -Sec: 260 V/ Redpfsb A N Sujx Adrsw

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area, X-axis: 3,309 mm Rsdjzdy S Sspfx Adrew Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Table width: 1,500 mm Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Redpfxjzf Ibds Adrew Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 2,200 mm, plate width: 3,800 mm, table length: 3,800 mm, table width: 2,200 mm, TECHNICAL DETAILS Maximum plate width: 3,800 mm Maximum plate length: 2,200 mm Main saw cutting depth: 123 mm Number of grippers: 7 Maximum feed rate: 140 m/min MACHINE DETAILS Main saw motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding stop Rjdpfjzf H Nmox Adrew The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rjdpfx Aozhuylodrew Measuring volume: 3,000 mm Accuracy: 0.07 mm MACHINE DETAILS Dimensions & Weight Installation dimensions L x W x H: 1,000 x 500 x 1,000 Weight: 30 kg EQUIPMENT Laptop and software Transport case Note: The red base on which the laptop is located is not included in the offer.

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA Rsdpfx Asx Dlwmjdrjw 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä2726

Condition: used, Year of construction: 2011, Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Redpfx Aoy Sccrsdrow Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data  - year of manufacture: 2011 - capacity 60/min  - adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET  - operation: film only  - application: water, beer, CSD - condition: very good, still connected  Additional information - conveyor for packages available

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  - Capacity (beverage volume): 6.000 - 36.000 l/h - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Redpfxeyhpdae Adrow Further details against request. 

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Rodoyhn Siopfx Adrjw Technical details  - Capacity (beverage volume): 6.000 - 36.000 l/h - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Further details against request. 

Condition: used, Year of construction: 2009, Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides.   Technical data  - year of manufacture: 2009 - capacity 60/min  - adjusted formats: 1,5L PET (2x(3x2)) - operation: film only  - application: water, beer, CSD - condition: very good, still connected  Additional information Redpfx Adoydkblsrsw - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available 

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Redpfeynnhqjx Adrjw Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4800 € 500 kg 1200 mm 400 mm Rsdjwirz Sspfx Adrsw 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 106178 € 2006.76 € 175 to 3050 mm Y1 / Y2 / X / R Achse 265 mm 2600 mm 410 mm 530 mm Rjdpfswirtbsx Adrow hydraulisch 200 mm/s 10 mm/s 200 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2 x 4 kW 4250 mm 1700 mm 2750 mm 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24" high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control's multitasking environment - Sensor bending & correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 16 WEEKS): CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Further options as pneumatic or hydraulic tool clamping on request.

Condition: ready for operation (used), Year of construction: 2009, number of axes: 3, This 3-axis BIESSE Skipper 100 was manufactured in 2009. It features a versatile working range with a maximum length of 3,000 mm and a width of 1,000 mm. The machine is equipped with 78 independent drilling spindles, allowing for efficient vertical and horizontal drilling, as well as routing and grooving capabilities. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Skipper 100 machine we have for sale. Contact us for further details. • Workpiece capacity • Length: 90 – 3,000 mm • Width: 70 – 1,000 mm • Thickness: 8 – 60 mm • Working ranges • X-axis • Vertical drilling: 0 – 3,000 mm • Horizontal drilling (X and Y): 0 – 3,000 mm • Continuous routing: 0 – 2,500 mm • Partial routing: 0 – 3,000 mm • Continuous grooving with saw (X direction): 0 – 2,500 mm • Partial grooving with saw (X direction): 0 – 3,000 mm • Y-axis • Vertical drilling: 0 – 1,000 mm • Vertical drilling with 32 mm system: 32 – 1,000 mm • Horizontal drilling in X: 0 – 1,000 mm • Horizontal drilling in Y: 90 – 1,000 mm • Routing: 0 – 950 mm • Grooving with saw (X direction): 112 – 1,000 mm • Z-axis • Material thickness: 0 – 60 mm • Machine configuration and features • 78 independent drilling spindles in two mirrored machining units: • 39 spindles in the upper unit • 39 spindles in the lower unit • Per machining unit: • 29 vertical drilling spindles (19 along X, 10 along Y, 32 mm spacing) • 8 horizontal drilling spindles along X (4 with dual output) • 2 independent horizontal drilling spindles in X • 2 independent horizontal drilling spindles in Y • 3.5 kW HSK electrospindle, 6,000 – 18,000 rpm • Upper and lower work (pressure) tables • Upper and lower machining units • Electronic thickness control • Central automatic lubrication • PC-based CNC control (Windows XP 600 with Soft CN) • Safety system Additional equipment Rsdpfezh H Iujx Adrjw • Roller loading table • Right-side belt unloading conveyor

Condition: used, machine/vehicle number: 007809, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Redpsyhbn Dsfx Adrjw Max feed speed: 40 m/min Operating Units Right Side: 8 nr Operating Units Left Side: 8 nr

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Rodpoyng Agjfx Adrjw Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Rsdpfx Adoyhbhwerjw

Condition: good (used), Year of construction: 2019, machine/vehicle number: N500003, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Serial Number: N500003 Stock Number: 3365 Diaphragm: 4 pieces Rjdpfx Adoy Ia U Rorow Capacity: up to 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500

Condition: good (used), functionality: fully functional, machine/vehicle number: 0577, spindle bore: 80 mm, center height: 280 mm, quill diameter: 75 mm, total length: 3,400 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, bed width: 345 mm, overall weight: 4,000 kg, spindle mount: MK 7, JESSEY MAYOR 2280 Lead Screw and Lathe Spindle Turning Machine - Voltage: 400 V - Frequency: 50 Hz - Distance between centers: 2000 mm - Swing over bed: 560 mm - Swing over cross slide: 390 mm - Swing in the crotch: 810 mm - Center height: MK 5 - Motor power: 7.5 kW - Bed width: 345 mm - Bed length: 2650 mm - Cross slide travel: 265 mm - Top slide travel: 135 mm - Tailstock travel: 180 mm Rsdpfxsy Twl Ro Adrjw - Tailstock spindle diameter: 75 mm - Lead screw diameter: 35 mm - Lead screw pitch: 6 mm - Includes two-axis digital readout, manufacturer EASSON, type: ES-8, as well as a three-jaw chuck, diameter: approx. 400 mm - With Multifix base and tailstock, plus an additional steady rest and a side cabinet with a stock of turning tools, tool holders, reducing sleeves and additional chuck jaws Note: The item must be collected between July 14 and July 16, 2026, on a date to be arranged. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Pressure system: electrohydraulic Press pressure: per cylinder Cylinder stroke: mm Hold-down device: no Rjdpey A Hkzsfx Adrew Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Rjdpey A Hkhsfx Adrjw Machine height: 1400 mm Weight: