Used Birkenbeul Ap 90S4 for sale (2,775)

Condition: used, Unwinding reel, reversing reel, LIV type O 2X20/360 H - DZ - AP Double unwinding reel Manufacturer's No. 11154298, Year of manufacture 1998 Coil weight max. 2000 kg per side Coil width max. 360 mm Coil outer diameter max. 1200 mm Coil inner diameter approx. 350 - 450 mm Distance from center of reel shaft to floor 1200 mm Distance from center of reel shaft to reel base 1030 mm Hydraulic motor power 0.75 kW Mains connection 400 volts, 50 Hz Ibsdpozwz Sysfx Apceb - pneumatic disc brake for each side, separate - without drive for the reel core - hydraulic spreading of the reel core - pneumatic pressure arm with roller - reel structure can be manually rotated by 180° with locking positions - coil guide ring Ø 1240 mm, for lateral coil guidance - pivoting arm for mounting and dismounting the coil guide ring - electrical control for each coil side, separate Space requirement L x W x H 2050 x 1700 x 2350 mm Weight 1950 kg in good condition

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 760 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 760 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece height (max.): 800 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 120, tool length: 400 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, horizontal machining center with pallet changer, two pallets 500x500, 120 tool positions, probing system. Isdpfx Aezdqvzopcebb

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Isdezh Icyspfx Apcebb Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,710 h, load capacity: 1,200 kg, lifting height: 3,010 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, battery capacity: 275 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,592 kg, total height: 1,900 mm, total length: 2,050 mm, total width: 800 mm, fuel: electricity, LINDE D 12 AP – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 1.200 kg Lifting height: 3.010 mm Closed height: 1.900 mm Free lift: 1.400 mm Mast: Duplex (2F301) Ibodoz Aqrmepfx Apceb Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 275 Ah v. 2022 Charger: Einphasig 24 V not tested Tyres: Polyurethan PU Service weight: 1.592 kg Length: 2.050 mm Width: 800 mm Year of manufacture: 2016 Operating hours: 5.710 h Condition: ready to drive EQUIPMENT Pulse control, Initial lift Internal no.: 1309254 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, axle configuration: 3 axles, first registration: 08/2014, color: other, Year of construction: 2014, Empty weight: 4.962 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Iodpfxsztb Tpe Apcjbb Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: excellent (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/$, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 850 kg, For sale: AI DR1 S lathe – very complete with accessories For sale: an AI DR1 S universal conventional lathe, complete with a comprehensive set of accessories. A robust and heavy-duty Dutch lathe, suitable for precise turning work and a variety of tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical data AI DR1 LS Center height: 133 mm Distance between centers: 470 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 145 mm Spindle bore: 26 mm Max. collet capacity: 18 mm Ijdpfxozxg Ags Apcebb Spindle nose: Camlock D1-4" Spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe comes with, among other things: Various chucks Collets DRO EASSON Tool holder Follow rest Various other accessories and tools And more Thanks to the D1-4 Camlock spindle nose, chucks can be changed quickly and easily. With 24 spindle speeds from 45 to 4,000 rpm, a distance between centers of 750 mm, and a swinging diameter of 270 mm over the bed, this is a particularly versatile lathe. Weighing approximately 855 kg, it is a stable and robustly built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and useful accessories. Condition: used Location: Emmeloord Asking price: €8750 EX Inspection and demonstration are possible by appointment. If you are seriously interested or would like additional information, please contact us.

Condition: used, Year of construction: 2014, operating hours: 1,565 h, Bomag BW 154 AP-4 AM tandem roller, year of manufacture: 2014, operating hours: only 1,565 h, engine: Kubota [55.4 kW/75 hp], Asphalt Manager 2, Bomag spreader, asphalt cutter on the right, weight: 7,300 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Please contact Tobias Ebert for more information. Iodpfx Apjzpdh Ujcebb

Condition: ready for operation (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/4, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 955 kg, For sale: AI DR1L S lathe – very complete with accessories For sale: an AI DR1 LS universal conventional lathe, complete with an extensive set of accessories. A robust and heavily built Dutch lathe, suitable for precise turning work and various tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical specifications AI DR1 LS Center height: 133 mm Center distance: 750 mm Turning diameter above the bed: 270 mm Turning diameter above the cross slide: 145 mm Main spindle bore: 26 mm Max. collet capacity: 18 mm Main spindle mount: Camlock D1-4" Main spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe is supplied with, among other things: Various chucks Collets Taper attachment Tool holder Follow rest Various other accessories and tools And more The D1-4 Camlock spindle mount allows for quick and secure changing of chucks. With 24 spindle speeds from 45 to 4,000 rpm, a center distance of 750 mm, and a turning diameter of 270 mm above the bed, this is a particularly versatile lathe. With a weight of approximately 950 kg, it is a stable and well-built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and usable accessories. Condition: used Location: Emmeloord Asking price: € 6450 EX Inspection and demonstration are possible by appointment. If you are seriously interested or require additional information, please contact us. Ijdezxgy Eepfx Apcsbb

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 20 rpm, For sale: Aciera F4 milling machine – ISO 30 – very complete with many accessories For sale: an Aciera F4 universal milling machine, equipped with an ISO 30 tool holder and featuring a very extensive range of accessories. The Aciera F4 is a high-quality Swiss precision milling machine, known for its robust construction, accuracy and versatility. This type of machine is very popular with toolmakers, precision workshops and enthusiasts of classic quality machines. Thanks to its universal design, the F4 is suitable for a large number of milling, drilling and precision machining operations. Technical specifications: • Brand: Aciera • Type: F4 • Design: Universal milling machine • Spindle taper: ISO 30 • X-axis travel: 400 mm • Y-axis travel: 180 mm • Z-axis travel: 400 mm • Solid and precise Swiss construction • Suitable for both horizontal and vertical milling, depending on the head and accessories used • Highly versatile Very extensive accessories The machine comes with a very large number of accessories, including various ISO 30 tool holders and other original and matching accessories. Ijdpfx Apjzxgyfjcsbb Including: • Dividing head • Various dividing plates • Rotary table • Machine vise • Various ISO 30 milling chucks • Various collet chucks and collets • Milling arbors and holders • Various milling cutters and cutting tools • Clamping tools • Drawbars • Clamping devices • Parallel blocks and clamping materials • Various original and matching machine attachments • And much more The large number of accessories makes this a particularly complete machine that can be used immediately in a wide range of applications. The extensive collection of holders, collets, dividing equipment and clamping tools alone represents a significant value. The Aciera F4 is not a light hobby milling machine, but a real precision and toolmaking machine. With a working area of 400 mm in X, 180 mm in Y and 400 mm in Z, the ISO 30 taper and the extensive accessories, this is a particularly versatile machine. A great opportunity to purchase a very complete Aciera F4 with ISO 30 taper and an exceptionally large number of accessories. Condition: used Location: Emmeloord Asking price: € 6,850 VAT: excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like more information about the machine and the available accessories, please contact us.

Condition: used, Year of construction: 2012, Air cushion machine Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: DN 10/4 - 8 bar; max. 82 Nm³/min (during cushion production): max. 3.5 Nm³/cycle Performance: 25 – 49 cycles/min. (depending on the type of film and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Ibsdpfx Apowulyljcjb Accessories / Special equipment: • Stored programs for different cushion sizes • Program change is done at the touch of a button • Can produce cushions from 4 cm to 16 cm in length with individually defined fill levels • 10 programs are available to store multiple parameters 9926ä

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. Ibsdpjzxz Dfefx Apcjb There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, Used 2.5 meter press brake from Ermaksan Model: AP 2600 60 Capacity: 2600 x 60 tons Elgo NC control 1 set of tools Isdpfx Apoyykkmecobb Year of manufacture: 2003

Condition: used, Year of construction: 2008, Manufacturer : CAM Model: AP Year: 2008 Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Ijdpfox R A Dgjx Apcebb Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: Ø 70 - 76 mm Roll: max. Ø 320 mm Width: 100 - 400 mm  

Condition: used, Year of construction: 2003, pressing force: 120 t, operating speed: 8 mm/s, overall weight: 12,000 kg, Hydraulic Press Brake Ibedpfxox Tp Aus Apceb Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. Iedpjy Ttrmjfx Apcjbb The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Ibodpsz Ag Rrjfx Apcsb - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Ibjdpez Agv Uefx Apcob - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Ibsdpfxjz Agw Eo Apcjb - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 235.1068, Title: Komax Kappa 235 Automatic Wire Cutting and Stripping Machine – 2006 Description: Ijdpfxjzzpxce Apcsbb For sale: Komax Kappa 235 automatic wire cutting and stripping machine, manufactured in 2006. The machine is suitable for cutting and stripping a wide range of cables and wires. Technical specifications: Manufacturer: Komax Model: Kappa 235 Year of manufacture: 2006 Voltage: 115/230 V Wire cross-section range: 0.22–35 mm² Flat cable processing: up to 40 mm width RS232 interface Cutting and stripping functions Extensive accessories and spare parts are included: Numerous cutting and stripping blades / knife sets V-blades Various blade holders Elastomer feed rollers Additional steel knurled feed roller set Various cable guides Guide tubes Inner-wire stripping unit Length measuring unit Additional mechanical parts and accessories Various original Komax spare parts A considerable quantity of tooling, blades, rollers, and spare parts is supplied with the machine, as shown in the photos.

Condition: used, Year of construction: 2017, functionality: fully functional, Eccentric press for sheet metal processing with tools. Ijdpjytykzefx Apcjbb

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: APX 50 20 A970102, input voltage: 400 V, For sale is a used AMADA APX 50.20 hydraulic press brake from 1997. This machine is designed for bending sheet metal and profiles of various thicknesses and features a robust, industrial design typical of AMADA equipment. The offer includes a complete set of equipment necessary for basic operation (table, basic tooling). Key technical specifications: Ibodozzmkcopfx Apcsb • Manufacturer: AMADA • Model: APX 50.20 • Year of manufacture: 1997 • Maximum pressing force: 50.9858 tons • Drive: hydraulic • Power supply: 400V 50Hz Equipment and documentation: • Standard tooling: table, basic tooling • Documentation: operating manual

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Maximum speed: 2 m/sec Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order Ibodpsz At Scofx Apceb The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Ibedpfx Apow N Hk Hsceb

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: Iodpfxjzxcn Ee Apcjbb - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Iedpfx Apozz Rpcscjbb - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.