Used Ati Porta Sens 11 Gas Leak Detector for sale (20,176)

Condition: ready for operation (used), Year of construction: 2006, Technical Data Product Number SK 11-320 Year of Manufacture 2006 Blade Length 517 mm Height 900 mm Width 750 mm Length 980 mm Power 1 kW Electric Power: 400V 50Hz 3N The Townsend SK 11-320 meat remover is a compact, high-quality device for removing all types of meat. It is designed for butcher shops and production plants. The meat remover has a built-in 517 mm knife. The device is easy to clean and operate. No tools required for disassembly and cleaning I can send more information and videos to interested parties at my email address The device is in perfect condition without any defects after a major service Very sharp shaft Knjdpfsxdvq Rox Ah Eeb New bearings and oil seals

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Knsdpfx Ahszd Rmge Eeb Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Movomatic 15343.0560, serial number: 119598, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Knedpfxei Eb Snj Ah Esb

Condition: used, functionality: unexamined, Ferwood Code: RU0012096 - Manufacturer Code: 6ES7421-1BL00-0AA0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA panel saw - If interested, we offer a refurbishment service, please contact us. Kodpfszmhrfex Ah Esnb

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Kodpfxezy Iiko Ah Eonb Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Kjdpfx Aex Ap I Hsh Eonb

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Knjdpfx Aoxgha Noh Eeb

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2025, A mobile jaw crusher is a type of crushing machine that is equipped with a jaw crusher and is mobile in nature. This crusher is designed to be moved around and taken to various locations, especially those where processing materials are needed on-site. Mobile jaw crushers are widely used in industries such as mining, construction, and recycling for processing a variety of materials. Here are the key features and components of a typical mobile jaw crusher: 1. Jaw Crusher: - The primary crushing unit of the mobile jaw crusher is the jaw crusher itself. It consists of a fixed jaw and a movable jaw, with the material being crushed between them. 2. Mobile Chassis: - The crusher is mounted on a mobile chassis, which may have tracks for mobility or be wheeled for easy transport. The mobility of the chassis allows the crusher to be easily moved between different work sites. 3. Feeder: - A vibrating feeder is typically included to feed the material into the jaw crusher. It ensures a consistent and controlled feed of the material to the crushing chamber. 4. Engine or Power Source: - Mobile jaw crushers are powered by diesel engines or electric motors. The choice of power source depends on factors such as the availability of electricity and the need for mobility. 5. Control Panel: - A control panel is provided for operators to manage and monitor the crusher's operation. It may include controls for starting and stopping the crusher, adjusting the discharge setting, and monitoring various parameters. 6. Hydraulic System: - Mobile jaw crushers often feature a hydraulic system to adjust the crusher's settings. This includes the adjustment of the jaw crusher's CSS (Closed Side Setting), which influences the product size. 7. Conveyor Systems: - Conveyors are used to transport crushed material from the jaw crusher to the next stages of the processing plant or for stockpiling. Some mobile jaw crushers have integrated conveyor systems. Ksdpfxjq I N Atj Ah Esnb 8. Magnetic Separator (Optional): - Some mobile jaw crushers come equipped with a magnetic separator to remove metal contaminants from the crushed material, preventing damage to downstream equipment. 9. Dust Suppression System (Optional): - To control dust generated during the crushing process, some mobile jaw crushers may be equipped with dust suppression systems. 10. Remote Control (Optional): - Remote control capabilities allow operators to control the crusher from a distance, enhancing safety and convenience. 11. Application: - Mobile jaw crushers are used for primary crushing of various materials, including hard rock, construction and demolition waste, concrete, asphalt, and natural aggregates. 12. Versatility: - Mobile jaw crushers are versatile and can be used in various applications. They are suitable for both recycling and quarrying operations, offering flexibility in processing different types of materials. Mobile jaw crushers are beneficial for operations that require frequent relocation or for processing materials in remote locations. They provide a cost-effective solution for on-site crushing and are widely used in the construction and mining industries. Operators should follow safety guidelines and manufacturer recommendations for proper operation and maintenance.

Condition: used, Fröling Turbomatic TMC – automatische Hackschnitzelkessel (35–110 kW) Mehrere Fröling Turbomatic TMC Anlagen auf Lager – sofort verfügbar. Leistung (kW) – Preis (netto) 35 kW 55 kW Knodpfxewakkte Ah Eob 70 kW 85 kW 110 kW Der Fröling Turbomatic ist ein vollautomatischer Biomassekessel, geeignet für Hackschnitzel, Späne und Pellets. ✔ Vollautomatischer Betrieb ✔ Robuste Industrieausführung ✔ Hohe Betriebssicherheit Der Preis beinhaltet bereits die Einzugsschnecke (Dosierschnecke), die das Brennmaterial automatisch direkt in den Brennraum fördert. Das komplette Austragungssystem (Raumaustragung) ist in der Regel nicht enthalten (separat erhältlich). 👉 Beim 110 kW Modell ist das komplette Austragungssystem bereits im Preis enthalten. ⸻ Technische Highlights: • Lambda-geregelte Verbrennung für optimale Effizienz und niedrige Emissionen  • Automatischer Rost mit Rüttel- und Kippfunktion für saubere Verbrennung  • Mehrzug-Wärmetauscher mit automatischer Reinigung (WOS-System)  • Automatische Entaschung von Brennraum und Wärmetauscher  • Induzierter Saugzugventilator für höchste Betriebssicherheit  • Großer Brennraum mit Schamottauskleidung für hohe Temperaturen und stabile Verbrennung  ⸻ Weitere Vorteile: • Modulares System – einfache Installation • Einzelantriebe für alle Komponenten → hohe Zuverlässigkeit • Anpassung an unterschiedliche Brennstoffe und Feuchtigkeit ⸻ TOP HEATING SYSTEMS – Gebrauchte Heizungsanlagen, Kessel, Wärmepumpen & Zubehör direkt ab Lager Wir sind ein Familienbetrieb mit rund 20 Jahren Erfahrung im Bereich Heiztechnik und verfügen über ein 1.500 m² großes Lager in Mosonmagyaróvár, Ungarn, mit einem ständig verfügbaren Bestand von ca. 50–60 Geräten. 📍 Standort: Unser Lager befindet sich in Mosonmagyaróvár, Ungarn – ca. 15 km von der österreichischen Grenze und ca. 80 km von Wien entfernt. Mosonmagyaróvár ist die erste größere Stadt auf ungarischer Seite nach der österreichischen Grenze. 🔥 Unser Sortiment umfasst unter anderem: • Hackschnitzelkessel • Pelletkessel • Holzvergaserkessel • Stückholzkessel • Biomassekessel • Öl- und Gaskessel • Wärmepumpen • Thermoventilatoren • Heißluftgebläse • Warmluftheizungen • Industrieheizungen • Pufferspeicher • Wärmetauscher • Förderschnecken • Raumaustragungen • Brenner • Pumpen • umfangreiches Heizungszubehör ⚙️ Zubehör und Komponenten: Zusätzlich verfügen wir über eine große Auswahl an Zubehör, darunter Umwälzpumpen, Plattenwärmetauscher und viele weitere Komponenten – von privaten Anwendungen bis hin zu industriellen Größen. 🏭 Marken in unserem Sortiment: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus und viele weitere. 🌐 Aktuelle Angebote: Ein Großteil unseres aktuellen Angebots finden Sie auf unserer Website: Zusätzlich verfügen wir über weitere Geräte, die noch nicht inseriert sind. 📅 Besichtigung: Eine Besichtigung in unserem Lager ist nach vorheriger Terminvereinbarung möglich. Bei Interesse kontaktieren Sie uns gerne – wir helfen Ihnen, die passende Lösung zu finden.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW Knjdpfx Aezrpt Ujh Ejb weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Ksdjw Ni Ibspfx Ah Ejnb

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Kjdpfjzh Nibjx Ah Ejnb

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Knedpjzhb Hljfx Ah Eob

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 11ED18A, For sale: 2 National Instruments PXI-6511 Digital I/O Modules, in fully working condition. Both can be sold separately for €300 each. Manufacturer: National Instruments (NI) Knsdpfxjzh H Sgs Ah Esb Model: PXI-6511 Quantity: 2 units Condition: Used – Tested and Working Channels: 64 digital input channels Isolation: Bank-isolated, ±30 VDC Interface: PXI Driver: NI-DAQmx compatible Both units are fully functional. Ideal for industrial automation, production line control, and testing systems. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packed with antistatic protection. Please contact us if you have any questions!

Year of construction: 1976, condition: used, machine/vehicle number: WR2, Demag overhead crane Crane canopy Crane runway Indoor crane Crane Payload / lifting capacity 5t - 5000KG, track 13900mm Outer dimension with endcarriage approx. 14000mm Rope hoist P-pull P412 M11 - 4 strand with fine lift Year of manufacture 1976 with floor control Overall height top edge of crane to hook approx. 1000mm Endcarriage length with buffer approx. 3000mm Lifting height rope hoist 5500mm Weight approx. 3200KG Control system overhauled, new contactors etc. installed, cable towing with towing chain added Ksdpfxornmzzo Ah Esnb Crane is dismantled, available immediately from location 79664 Wehr. Inspection book is available Good used condition Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please ask for zip code Collection preferred

Year of construction: 2010, condition: like new (used), Professional multinational tilting pan Frima VCC 211+ Knsdpfszrk Tpex Ah Eob With a capacity of 100 liters, this tilting pan allows you to do anything you desire: cooking, pressure cooking, baking, frying, and more. Suitable for larger catering establishments, canteens, schools, kindergartens, butchers, etc. Features built-in high-power heaters, automatic water supply; simply enter the desired amount of water, and the pan will fill itself. Water drainage is also built into the pan. Rational VarioCooking Centre 211 – professional cooking for large quantities The Rational VarioCooking Centre 211 is a top-of-the-line, multi-functional cooking appliance designed for professional kitchens and catering operations with a higher volume. With a 100-liter cooking pot and an intelligent control system, it replaces multiple conventional appliances and enables fast, precise, and uniform preparation of various dishes. Key advantages: Capacity: 100 liters – ideal for larger quantities of food. Efficiency: suitable for preparing 100 to 300 meals per day. 7 cooking modes: combines the functions of a stove, fryer, grill plate, tilting pan, and pot in one appliance. Temperature range: 30 °C to 250 °C for a wide range of food preparation. Power: 27 kW Dimensions: 1164 × 914 × 1100 mm (W × D × H) Advanced features

Year of construction: 1970, condition: used, machine/vehicle number: TH20010142, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm Knedsv A Rxkjpfx Ah Eob with steel hoist with floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Knjdov A Sa Njpfx Ah Ejb Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: good (used), standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler Kedpfxsmhmxuo Ah Esnb -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit Knjdpfswg Tmdox Ah Eeb External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Knsdpfow Ixz Ujx Ah Eeb Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz Knodpfsy Ntl Sjx Ah Esb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Knjdpfew N Egajx Ah Ejb terms of payment: 100% prior to delivery

Condition: good (used), functionality: fully functional, Band-A-matic F117S 220 V, single phase Fully operational Made in Japan Knedpfx Ahezkwdfs Eeb Suitable for packaging meat, poultry, fish, cheese, and other food products Available for inspection and testing

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Knsdpfxjzimqrs Ah Eeb Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.