Used Ares Seiki S3030 for sale (456)

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm Gsdpfszukn Eex Akyobu • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Boring bar capacity: 50 mm Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor

Condition: used, Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: MORI SEIKI, controller model: MSX-501, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,400 kg, Features a double pallet system, Mori Seiki MSX-501 control unit, but lacks the pallet lifting motor and the door guide. Workholding fixtures and tools are not included. Godpfx Akjzxr U Ieysbu COLLECTION MUST TAKE PLACE BY SEPTEMBER 2026.

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 6,300 h, Dugard 1350 XP Machining Center (2017) Manufacturer: Dugard Type: 1350 XP Year of manufacture: 2017 Control system: Heidenhain iTNC640 Condition: good, used Spindle hours: 6300 hours Travel in X-axis: 1,350 mm Travel in Y-axis: 640 mm Travel in Z-axis: 660 mm Rapid traverse rate X-axis: 33 mm/min Rapid traverse rate Y-axis: 33 mm/min Rapid traverse rate Z-axis: 25 mm/min Workpiece weight (max.): 2,300 kg Overall length: 3,800 mm Overall width: 2,495 mm Table width: 1,500 mm Gsdpfx Aksy Tlv Reyjbu Table length: 600 mm Table load capacity: 2,300 kg Spindle speed: 20 - 12,000 rpm Tool magazine: 36 Tool holder: SK 40 Chip conveyor Infrared probe TS 460 Tool measurement system TT160 Internal cooling system 20 bar Documentation/Manual

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Distance between centers: 1,828 mm Main spindle: Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible Gsdpezxg Susfx Akyebu 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Gjdpfx Aewvrfkekyjbu Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, Mitsui Seiki HU40A (2005) is a high-precision horizontal machining center: Gsdpfx Akswwrw Noysbu * axis travel: 560 × 560 × 560 mm, * spindle: 12,000 rpm, power 11–15 kW, BT40 taper, * tool magazine with 60–220 positions, * new FANUC CNC systems, * large workspace and cooling system, * chip conveyor.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface Gbodsykpg Hopfx Akyeu No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, Controller MITSUBISHI MELDAS M70 Table size 910 x 400 mm Max. table load 960 kg X travel 760 mm Y travel 445 mm Z travel 520 mm Spindle speed 12000 rpm Tool holder type MAS BT40 Gbsdpfszxzwrex Akysu Spindle power 22 kW ATC Magazin 22-fold Weight 4400 kg Dimensions LxWxH = 2200 x 2200 x 2700 mm Features, accessories - 2 axis nc round table - Coolant unit - Chip conveyor - Manuals

Condition: used, Year of construction: 2006, operating hours: 28,491 h, machine/vehicle number: 309, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table load: 5,000 kg, overall weight: 28,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 29,840 h, coolant supply: 70 bar, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI 100 A Year of manufacture: 2006 120-tool magazine, BT 50 Knoll high-pressure system, 2000 liters, 70 bar Chip conveyor Pallets, 1000x1000 mm NC table, 0.001° Linear scales in all axes Spindle speed: 6000 rpm Gbjdpfx Akoz Iyaueyju Can be inspected while in operation.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Gjdpfjzg A Sajx Akyjbu Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 The machine is currently powered and available for immediate delivery. • P8 power supply, valued at 1500, was renewed in August 2024. • The spindle was repaired in 2017 and has since been used primarily in a single-shift operation, as we mainly produce individual parts and small series. Therefore, the machine has spent most of its time in setup mode. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm * 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring during pallet changes is likely damaged, resulting in oil leakage. We have temporarily resolved this by inserting a ball valve in between. We only need to open this when we change the pallets, which doesn't happen very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being switched off for an extended period. The procedure for restoring it is known. If you have any questions or require further information, please send us a message or call us. Gbodpfxsyt Nnpj Akyou

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Gbodpfx Aez Hxb Uskyou Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Gjdpeznnc Hjfx Akyobu Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm Gbjdpszyu Umjfx Akyeu tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM 20-tool changer Gbedpfszgrzkjx Akyeu Coolant pressure: 20 bar Renishaw

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC Gedpfx Asu A U Nkekyobu MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. Gbedpfx Aszwxzxekysu - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, Technical data: 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm Gbedpfx Akszn Ransyeu CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NHX 5000 was manufactured in 2011. It features a generous X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 880 mm. The machine is equipped with a continuous 4th axis (B-axis) and a tool changer capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Control unit: MAPPS IV CNC • Pallet dimensions: 500 x 500 mm • Table rotation: Continuous 4th axis (B-axis) Additional equipment Gbjdpfxoz Earfe Akyju • Chip conveyor • Coolant system with filtration unit and paper filter • High-pressure coolant, 90 bar • Tool presetting (tool measurement) Technical Specification Taper Size ISO 40

Condition: repair required (used), Year of construction: 1995, machine/vehicle number: VM40067E, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, overall weight: 6,000 kg, spindle speed (min.): 8,000 rpm, Brand / Manufacturer: HITACHI Model: SEIKI VM 40 II Year: 1995 Taper: BT40 Serial number: VM40067E Control unit: SEICOS MY II DIMENSIONS Table dimensions: 760 x 400 mm. TRAVEL X-axis traverse: 560 mm. Gbodpozl S I Uefx Akysu Y-axis traverse: 410 mm. Z-axis traverse: 410 mm. SPINDLE Spindle speed: 8,000 rpm. Spindle power: 5.5 / 7.5 kW. WEIGHT AND DIMENSIONS Machine weight: 6,000 Kg. ACCESSORIES 30-station automatic tool changer / ATC Capacity: 30 Tools Nikken 4th axis CNC rotary table (REQUIRES REPAIR) The machine is complete and includes documentation and manuals. The mechanical part is in good condition. The electronics need repair; likely the power supply. (NEEDS TO BE REPAIRED) The machine is complete. It also has documentation and manuals. The mechanical part is good. The electronics need repair. Probably the power supply.

Condition: excellent (used), Year of construction: 2010, FANUC MSX-711 Mapps 4 control with B + C axis Gbjdpfx Akjzwt N Djyeu Working travels 500 x 350 x 510 mm Table swivelling -180°/+160° Table rotating 360° Spindle taper HSK63 Spindle speeds -20'000 rpm tool changer 61 pos. Coolant through spindle 3D tracer M&H Tool lenght measuring device Tool breakage control device MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Gbsdpfx Akjzx Nx Deyju Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem Gbsdpszk U Rpjfx Akyeu C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Swing over bed 755mm, swing over crosslide 740mm, max turning diam 366mm, max turning lenght 785mm.Live tooling, C-axis. X 260mm, Y 100mm, Z 795mm Y , Control MXS 850 III. Gedpfx Asz Arxuekyjbu

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,711 h, This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details. • Machine weight: 6350 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 510 mm • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 34 kVA Gbodpfxez Akwpj Akyou • Machine type: Vertical Machining Center • Year: 2013 • Made in: Japan • Serial number: NV502130709 • Machine connected and available for inspection/testing.