Used Ancimo Drg-45 for sale (9,296)

Condition: used, Year of construction: 1995, Vertical baler HSM 45 VL for SALE/RENT! Bedpfx Afjz Ehhzsgewu Manufacturer: HSM Type: 45 VL Year of manufacture: 1995 We have a total of 8 units available. SALE PRICE: 1000 EUR/unit (ex works Lithuania)

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Bwsdpezzkwmefx Afgeu Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS Bedpfxozxbkfe Afgswu GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-21-369, functionality: fully functional, operating hours: 999,999 h, power: 25 kW (33.99 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,700 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 200 mm, number of axes: 4, number of slots in tool magazine: 12, controller manufacturer: Homag, actuation type: electric, total height: 2,400 mm, total length: 7,250 mm, total width: 4,000 mm, overall weight: 7,500 kg, table length: 4,500 mm, table width: 1,150 mm, Equipment: CE marking, documentation/manual, We are offering this used HOMAG BOF 41/45/R machining center, manufactured in 2000. Manufacturer: HOMAG Model: BOF 41/45/R Year of manufacture: 2000 Condition: used Bwodpjzwm Rbjfx Afgju Category ID: 2076 Type ID: 970 Machine type: Machining center Includes 3 vacuum pumps: 2 Siemens Elmo (Elmo Rietschle) vacuum pumps, type: 2BL2141-2AH50-4A-ZN01 + 1 Rietschle VTA140 vacuum pump The machine is connected and still in use. Inspections are welcome! Available from mid-December! If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, operating hours: 18,545 h, lifting height: 15,200 mm, motor manufacturer: Volvo-Diesel, Lifting capacity: 45.000 kg Bjdpfjznw Hhsx Afgjwu Please contact Sales Team for more information

Condition: used, functionality: fully functional, For sale is a Versaflow 3/45 selective soldering machine manufactured by ERSA. Serial number: S011B-15G0525 Dimensions: 5.70 x 1.69 x 1.66 Weight: 2300 kg Bedpfx Aezzldbofgowu Note: Width adjustment is not possible (the transport width has been fixed to the frame width). Price upon request.

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Saw head: swiveling 45° Carriage length: 5000 mm Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Cutting width indicator: scale Rip cutting length at the crosscut fence: 3200 mm Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Storage location: Nattheim Bwodpfx Afez H Txhjgsu

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 Bjdpfx Aoz A S S Ssfgowu 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Alternatively equipped with underwater granulation, stock no. 2758 MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Bwsdpfx Afjznczdogeu Machine weight: 950 kg Includes roller tables: 2 x 4 m

Year of construction: 2013, operating hours: 3,649 h, condition: used, Machine is in working condition and maintained according to schedule. 1 fluxer and 6 pots. Will be available in coming weeks. Ask for additional information and quote! Bwodpfozvcg Njx Afgsu

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00658, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2019.04. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2019.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Bwodpfjzychnsx Afgsu Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2019.04 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: good (used), Code: 0488 Brand: GRIGGIO Model: T 45 T-PL - CE Standard Electronically programmed automatic tilting spindle moulder (+ 45° - 30°) with 3 contolled axis with tenoning carriage - CE Standard Technical data: Spindle tilting + 45° - 30° Shaft diameter mm 40 Motor power Hp 10 (Kw 7,5) Rotation speed 3000/4500/6000/8000/10000 rpm Shaft rotation reverser Electronic programmer SIEMENS controlling the sequential movement of the spindle Electronic programming: Spindle working height - Spindle tilting - Spindle moulder fence Electronic spindle moulder fence with spindle support to facilitate table exclusion Table with movable sector with manual adjustment in place of the rings on the table Height of work table mm 920 Extensible front support bar Work table dimensions mm 1800 x 730 Max tool size retractable under work table mm 320 x 140 Tenoning carriage for tenoning operations mm 900 x 330 - Stroke mm 1300 Bwedjz Hk T Aspfx Afgou The work table can be fully tilted to + 60 - 60 degrees with the possibility of using the entire work table surface in any position - It can be aligned with the machine work surface Tenoning guard with suction hood Aluminium tables on the guideway N° 2 suction hoods diameter mm 120 Automatic feeder with 4 rollers with speed variator with motorised lift Overall dimensions of assembled machine mm 2800 x 1600 x 1800 h Overall dimensions for transport mm 2250 x 1600 x 1800 h Weight kg 1300

Condition: used, Year of construction: 2011, bore capacity in steel (diameter) 40 mm throat 250 mm bore stroke 125 mm spindle taper MK 4 spindle turning speed range 50 - 2500 U/min 550 mm 230 mm table surface area 820 x 240 mm connected load frequency 400 V total power requirement 0,8 kW Bjdpfx Aozyvawjfgewu weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand

Condition: used, mileage: 684,266 km, power: 220 kW (299.12 HP), first registration: 11/2008, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 11/2026, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 LE 13m (49+45+1+2 emergency seats) (Vehicle 126) First registration: 27.11.2008 684,266 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 11/2026, TÜV (technical inspection) valid until 11/2026 Permissible total weight: 19,000 kg, unladen weight: 11,600 kg, payload: 7,400 kg Overall length: 13,070 mm x overall width: 2,550 mm x overall height: 3,400 mm Tires: 275/70R22.5, front approximately 80%, rear approximately 40/40% Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Retarder Electric windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Bsdpoz H Edvsfx Afgewu Stop brake 49+51+1+2 emergency seats Emergency exit 12-volt socket LAWO MOBITC ICU 400 Frame with some rust 15.07.2024: Right front axle, brake caliper replaced; 16.08.2024: Water filter + expansion tank replaced; 24.11.2024: Axle modulator replaced; 29.11.2024: E-circuit safety valve replaced; 14.04.2025: Water filter changed; 30.07.2025: Water box replaced, engine + water filter flushed Various signs of wear and tear, commensurate with age Last inspection on 10.10.2025 at 655,348 km, next inspection at 715,348 km Price: 5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, Year of construction: 1984, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,200 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, overall weight: 1,200 kg, Equipment: saw blade guard, scorer, Cutting length / carriage length 2800 mm Cutting length according to scale 2850 mm Cutting width at parallel fence 1200 mm, manual adjustment Drive motor 5.5 kW, 400 V, 50 Hz Bwsdpoz At Rlefx Afgou Saw blade speed 3/4/5/6000 rpm Max. tool diameter 450 mm Cutting height at 90° = 0-150 mm Cutting height at 45° = 0-107 mm Saw blade swivel with optical angle indicator Speed indicator with optical display Hydraulic height and swivel adjustment via foot pedal Parallel parallelogram guard with narrow and wide guard Dust extraction connection on top 80 mm, dust extraction connection on bottom 120 mm Scoring unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,154 h, load capacity: 4,500 kg, lifting height: 5,980 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 2,000 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,082 kg, total height: 2,800 mm, total length: 2,950 mm, total width: 1,400 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-45 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.500 kg Lifting height: 5.980 mm Closed height: 2.800 mm Free lift: 1.870 mm Mast: Triplex (3F598) Fork length: 2.000 mm Fork carriage: 3 A Bodpfxjz Aqirj Afgswu Drive: Elektro 80V Battery: 80 V/930 Ah (2015) Charger: 80 V - not tested Tyres: Superelastik SE 355/50-15 (25%) / 21x8-9 (15%) Service weight: 7.082 kg Length: 2.950 mm Width: 1.400 mm Year of manufacture: 2010 Operating hours: 15.154 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1309115 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position Bwedpfoy Nkhdjx Afgju 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Year of construction: 2008, Format: 300 x 450 mm Equipment: max. screen frame size 500 x 750 mm table height 945 + 30 mm Bedpfsyzrupjx Afgjwu screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Scoring unit Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, Bedpfxezipw Ij Afgjwu carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Bwsdpfsz Hxkvjx Afgsu Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Granulator / Granulators Bodpfsz Hxcfox Afgewu Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Technical data Make: Kaast Model: PS 45 Year: 2018 Bwodjy Alc Nopfx Afgeu Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 1,086,189 km, power: 220 kW (299.12 HP), first registration: 04/2012, fuel type: diesel, number of seats: 43, gearing type: automatic, next inspection (TÜV): 05/2027, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, parking heater,

Condition: used, mileage: 1,092,639 km, power: 220 kW (299.12 HP), first registration: 06/2012, fuel type: diesel, number of seats: 42, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, parking heater,

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights Bedpfjz Ipvrjx Afgowu - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 450 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1640,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.