Used Analog Input for sale (2,857)

Condition: used, Wilo DL-E 100/145-11/2-S1 Dry-running Twin Pump Dry-running twin pump in an inline design for pipe installation or base mounting, with an integrated frequency converter for electronic control, among other things, for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic performance adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual control mode Setting of the differential pressure setpoint Setting of the speed (manual control mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2–10 V, 4–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0–10 V for actual value signal of the pressure sensor Analog input 2–10 V, 0-20 mA, 4–20 mA for actual value signal of the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access lock Twin pump management (twin pump or 2 x single pump) Main/standby operation (automatic fault switchover) Main/standby operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on/off) Your advantages Energy savings thanks to integrated electronic performance adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/standby operation and parallel operation Configurable error behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Power connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz Ljdpewbqrtsfx Ab Ajru 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power input P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0: 500 mm Suction-side pipe connection DNs: DN 100 Discharge-side pipe connection DNd: DN 100 RRP: 29,006.25 € More items, new and used - find them in our shop! International shipping costs on request!

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Ledpfx Aoxhfq Iob Asru Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: Lsdpfx Ajzwhdisb Aeru - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Ledsz I S Uwjpfx Ab Aeru Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Lrodey Akczspfx Ab Aou Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. Lrsdpfx Ajxxx Ubsb Aju The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors Ledsyug Hxspfx Ab Ajru • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, EA Elektro Automatik Type: EA-EL 9080-170 B Lsdouv Eudopfx Ab Aeru Electronic DC load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type Socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNom Overcurrent protection range 0...1.1 * INom Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setpoint values Δ / K Current / Voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNom Display: Accuracy ≤ 0.1% UNom Remote sensing compensation Max. 5% UNom Current regulation Setting range 0...173.4 A Stability at ΔU < 0.1% INom Accuracy (at 23 ± 5°C) ≤ 0.2% INom Display: Accuracy ≤ 0.1% INom Rise time 10...90% INom < 23 μs Fall time 90...10% INom < 46 μs Power regulation Setting range 0…2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance regulation Setting range 0.04…15.3 Ω Accuracy (at 23 ± 5°C) ≤ 1% of the resistance end value + 0.3% of INom Display: Accuracy Included in the accuracy of the setpoint value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, Remote control on/off, R-mode on/off Status signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation to the device Max. 400 V DC Sampling rate Setpoint inputs 500 Hz Isolation: Input (DC) to housing DC-minus: permanently max. ±400 V DC-Plus: permanently max. ±400 V + max. input voltage Input (AC) to Input (DC) Max. 2500 V, briefly Climate: Cooling method Temperature-controlled fan Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT Galvanic isolation to the device Max. 400 V DC Connections: Rear Share-Bus, DC input, AC input, Sense, Analog interface, USB-B, Master-Slave bus, Interface module slot Front USB-A Dimensions: Housing (W x H x D) 19" x 2 U x 464 mm Total (W x H x D) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Documents & Downloads Datasheet: Operating manual Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs Lrjdpfxsyug R Ro Ab Aeu • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Lsdpew Ryt Dsfx Ab Asru Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 701, The electrode drying oven SET-50/4 features 4 shelves, each with 5 separate compartments for electrodes, allowing for organized storage of various electrode types. The capacity of the device is sufficient for the contents of approximately 50 packages of stick electrodes. The housing and door are double-walled and well-insulated. The device has a thermostat with an indicator light, allowing the drying temperature to be adjusted continuously up to 400 °C. The interior, including the shelves, is made entirely of stainless steel. Upon request, we can include an analog thermometer with a display range of 0-400 °C. Thanks to all these features, the SET-50 is the ideal device for stationary applications. It is delivered without a power cable and plug. Capacity: up to 250 kg of electrodes Dimensions in mm: 1080 x 740 x 810 Weight: 65 kg Temperature: 400 °C Heating power: 3700 watts Input voltage: 230 V 50 Hz Ledpfxez Ahcie Ab Ajru

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse Lredpfxjzhbf Uo Ab Aju • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Lrodpfx Ajxv Abgsb Asu Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit card, analog distribution card, distributor print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control of electronic modules from injection molding machine Battenfeld -Input card: Bachmann CE 32/1 B 2600/01 4 pcs -Output card: Bachmann CA 16 / P 2.5 B 2596/00 5 pcs -Processor card: Bachmann CC 11/3 2 pcs. -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 B 4018/00 -Processor card: Bachmann STU 500 UB 2623/00 -Processor card: Bachmann STU 500 UB 4749/00 -Control card: Bachmann MF 600/1 KOP 500 U and KOP 500 ZB 2563/01 -Power supply: Bachmann SNT 411/2 Lrsdpfx Ajhbiwiob Aju -Card Rack: Bachmann BUS 618/1 BALS500 B 2568/00 -Analog card: Bachmann AIO 500 B 2585/00 2 pcs. -Temperature control card: Bachmann UTI 06 F1 B 2932/01 -Temperature control card: Bachmann UTR 300 -Price / sale: complete -Dimensions total: 435/240 / H270 mm -Weight: 8.7 kg

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. Lredpfezi Twrex Ab Aou In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: good (used), Year of construction: 2012, Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module Lodpfokahi Hex Ab Asru -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from Battenfeld injection molding machine -Power supply: Bachmann SNT 411/2 -Control card: Bachmann VID 500 B 2565/00 -Memory card: Bachmann MEM 501 -Processor card: Bachmann STU 500 U Lsdoqgi Itepfx Ab Asru -Electronic card: INC 500 B2562/00 -Analog card: Bachmann AIO 500 B 2585/00 -Processor card: UTU B 2933/00 -Temperature control card: Bachmann UTR 300 -Control card: Bachmann MF 600/1 B 3736/01 -Coupling card: Bachmann KOP 500 UB 2563/00 -Processor card: Bachmann CC 11/3 B 35227/00 -Output card: Bachmann CA 16/P 2.5 SB 2596/00 -Input card: Bachmann CE 32/1 B 2600/01 -Output card: Bachmann CA 16/P 2.5 B 2596/00 -Power supply: Bachmann SNT 411/2 -Price/sale: complete -Total dimensions: 485/135/H250 mm -Weight: 5,8 kg

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: PXI-6229, For sale: 2 units of National Instruments PXI-6229 Multifunction I/O DAQ modules, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-6229 Quantity: 2 units Lrodpfx Aozh H Ihob Aju Condition: Used – Fully Tested and Working Tested with: NI MAX (Measurement & Automation Explorer) – operation verified Analog inputs: 32 AI (16-Bit, 250 kS/s) Analog outputs: 4 AO Digital I/O: 48 DIO Interface: PXI Counter/Timer: Two 32-bit counters/timers Both units have been thoroughly tested using NI MAX software and have proven to be fully functional. The operation of all analog and digital channels has been confirmed. Removed from a working industrial environment; no faults or irregularities found. Ideal for laboratory automation, research, design verification, and manufacturing testing. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection for safe delivery. Please contact us if you have any questions!

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 13E273E, For sale: National Instruments PXI-6221 Multifunction DAQ Module, in fully working condition. Lrsdpfxjzh Irzo Ab Asu Manufacturer: National Instruments (NI) Model: PXI-6221 Condition: Used – Fully Tested and Working Tested with: NI MAX – functionality verified Analog Inputs: 16 AI (16-Bit, 250 kS/s) Analog Outputs: 2 AO Digital I/O: 24 DIO Counters: Two 32-bit counter/timers Connector: 68-pin VHDCI Interface: PXI / PXI Express hybrid-slot compatible Driver: NI-DAQmx compatible Tested with NI MAX software and confirmed to be fully functional. All analog and digital channels have been tested and verified. Compatible with LabVIEW, LabWindows/CVI, and Measurement Studio. Ideal for laboratory automation, research, and production testing. Removed from a working industrial environment, no known issues. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, TDK GEN20-120-1P230, TDK-Lambda 19-inch laboratory power supply 44 mm housing, 0 - 20 V/DC / 0 - 120 A Switched-mode Input voltage range: 85 - 265 V/AC Integrated RS-232 / RS-485 interface Lodpsk Uuh Tsfx Ab Aeru External, analog programming and monitoring Design (general): Rack-mountable Item condition: Used, in perfect condition R11B1_EK You can find more laboratory power supplies – new and used – in our shop! International shipping costs available upon request!

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Lrsdpfedz Srasx Ab Aeu Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: ready for operation (used), Siemens 6ES5463-4UA13 analog input module, serial number: A5E00224647, professionally and completely refurbished and tested, with a 24-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Ledpfei Edpusx Ab Asru

Condition: used, Siemens SIMATIC S7-1200 CPU 1214C DC/DC/DC 6ES7214-1AG40-0XB0 Manufacturer: Siemens Product series: SIMATIC S7-1200 Type: CPU 1214C DC/DC/DC Article number: 6ES7214-1AG40-0XB0 Device type: Compact CPU / PLC Supply voltage: 20.4–28.8 V DC Lodpfxezxrm Rj Ab Asru Digital inputs: 14 × 24 V DC Digital outputs: 10 × 24 V DC Analog inputs: 2 × 0–10 V DC Program/data memory: 150 kB

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Lodjxxx Tqopfx Ab Aeru

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Interface modules: 6ES5 306-7LA11 -Digital input: 6ES5 430-7LA11 2 pieces -Digital output: 6ES5 454-7LB11 5 pieces -Subrack: 6ES5 701-2LA11 -Individual components: see photos -Price/sale: complete Lrjdpfx Abjn H Etme Aeu -Total dimensions: 480/210/H305 mm -Weight: 10.8kg