Used Akira Seiki V2.5Xp 4+1 Axis for sale (104,465)

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Chjdpfx Alsxxraqjbob Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: used, Year of construction: 2003, turning diameter 430 mm turning length 519-525 mm control Mori seiki MSX-805 x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg Chedey Sblxepfx Albob

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Chedpfxey Eydyo Albjb Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, total width: 1,800 mm, table load: 160 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details. • Table: 700 × 400 mm • Spindle: 12 HP (max 15 HP); cooling: air, through-spindle coolant (CTS), and external coolant • Rapid traverse (X/Y/Z): 48 / 60 / 72 m/min • Accuracy: positioning 0.012 mm; repeatability ±0.005 mm • Tool changer: 24 + 1 servo-controlled; max tool Ø 75 mm; max tool length 200 mm; max tool weight 4.5 kg • Change times: tool-to-tool 1.9 s; chip-to-chip 3.4 s • Control: AKIRA Mi:845 (compatible with FANUC G-code) • General data: coolant tank 150 L; power requirement 25 kVA; required air pressure 0.5 MPa • Application: suitable for light machining, especially non‑ferrous metals and composite materials Additional equipment • Twin pallet system (APC) Technical Specification Taper Size HSK 63 Chsdpfx Aleyvip Tjbsb

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: SL154SY, turning length: 750 mm, turning diameter over cross slide: 510 mm, turning diameter: 680 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 56 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 550 mm, mount diameter: 20 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 550 mm, torque: 70 Nm, bar passage: 56 mm, total height: 2,015 mm, total length: 3,336 mm, total width: 1,873 mm, Equipment: rotational speed infinitely variable, MORI SEIKI SL154SY LATHE WITH LNS BAR FEEDER RENISHAW LASER CHECKED Chedpsxddfvsfx Albjb TOOLBOX. MACHINE INSPECTED AND READY TO WORK IN OPTIMAL CONDITIONS.

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Codpjy U Naiefx Albshb Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Axesta 50 70 086 Axis Control, Serial No.: 9705180034, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Codoi D T Aqepfx Albjhb

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086, serial number: 9705180044, unused, 100% functional, scope of delivery as shown in the photos. Chjdpfx Alsi D T A Aebob

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Codjt Rg E Sopfx Albohb Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis model 5, Z-axis model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work end display with alarm light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 3826

Condition: ready for operation (used), Year of construction: 2015, GIUSTINA R 114 CNC Fanuc Centerless Grinding Machine CNC Control: FANUC Series 18i - MB - 6-axis - X, Y, Z, W, U, V Grinding capacity: Ø 1.5 to 500 mm Codszdnx Tjpfx Albshb Operating grinding wheel: Ø 610 x 508 mm Conductive grinding wheel: Ø 355 x 508 mm Weight: approximately 15 tons.

Condition: new, Allen Bradley 2198-S086-ERS4 Kinetix 5700 single axis safe speed drive, SN: 96490747, unused in original packaging, 100% functional, delivery contents as per photos. Chsdpfox Eqr Iox Albjb

Condition: new, Allen Bradley 2198-S086-ERS4 Kinetix 5700 Single Axis Safe Speed Drive SN: 96492125, unused in original packaging, 100% functional, delivery scope as shown in the photos. Cedpjx Eqtrjfx Albehb

Condition: new, Allen Bradley 2198-S086-ERS4 Kinetix 5700 Single Axis Safe Speed Drive SN: 96490792, unused in original packaging, 100% fully functional, scope of delivery as per photos. Cedpfx Alex Eqr Uebjhb

Condition: new, Allen Bradley 2198-S086-ERS4 Kinetix 5700 Single Axis Safe Speed Drive SN: 96492115, unused in original packaging, 100% functional, delivery as per photos. Chsdpjx Eqtlsfx Albjb

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Chjdpfod Tbbdex Albob Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm Codpfx Ajguk Dvolbehb - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer ramp and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load display, vehicle hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes reserved, sample images only --, More data at: !, More details: ! Chjdpfx Alozygbxsbob

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Chedpfezycltjx Albjb Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle bore: 162 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 4,200 mm, total height: 2,900 mm, total length: 8,200 mm, total width: 3,200 mm, workpiece weight (max.): 2,500 kg, overall weight: 24,000 kg, distance table center to spindle nose: 4,200 mm, CNC Lathe with c-axis GEMINIS - GHT-4 MACH-ID 9802 Chodpfezx Swcox Albjb Make: GEMINIS Type: GHT-4 Control: FAGOR 8065T Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Control: FAGOR 8055 Chip conveyor: Yes Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer ramp and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load display, vehicle hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes reserved, sample images only --, More data at: !, More details: ! Codpfx Aezxnm Tslbjhb

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Chsdpsvvi Spofx Albob Storage location: Nattheim

Year of construction: 2007, condition: used, CNC Machining Centre designed for the machining of aluminium, PVC, steel, and light alloy profiles, ideal for the production of windows, doors, curtain walls, and light metal structures. Technical Specifications: 4 controlled axes Working table: 4,000 mm X-axis travel: 4,270 mm Y-axis travel: 1,040 mm Z-axis travel: 430 mm A-axis rotation: from -15° to +195° FOM electrospindle: 4 kW Spindle speed: 12,000 rpm Tool holder: ISO 30 Tool magazine: 4-position ISO 30 4 pneumatic clamps with automatic positioning Retractable left pneumatic stop Right pneumatic profile positioning stop Minimum quantity lubrication (MQL) system with pure oil Machine weight: 2,500 kg Applications Chsdpfx Ajzlpnlolbob Ideal for the machining and production of: Aluminium windows and doors Doors and windows Curtain walls Industrial aluminium profiles Aluminium and light alloy fabrication

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Chedpfxszwfiis Albeb

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) Chjdpfx Alog N Db Hsbeb 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: LZ202508173W, type of input current: AC, total height: 1,600 mm, total width: 600 mm, total length: 1,300 mm, input voltage: 220 V, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, sheet thickness aluminum (max.): 5 mm, product height (max.): 6 mm, space requirement height: 1,800 mm, space requirement width: 1,600 mm, space requirement length: 2,300 mm, input current: 32 A, protection type (IP code): IP54, laser power: 1,500 W, input frequency: 60 Hz, laser wavelength: 1,080 nm, wire diameter (max.): 1.8 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, Equipment: documentation/manual, type plate available, EX-DEMO TRADE SHOW 2026 UNIT WITH 40% DISCOUNT We are offering for sale, with an exceptional 40% discount on the list price, our LZ-WH 1500W fiber optic laser welding machine. This machine is in like-new condition: it has been used for only a few hours as a demonstration unit during industry trade shows throughout 2026. It is in perfect working order and ready for use. 4-IN-1 TECHNOLOGY: MAXIMUM VERSATILITY A single, compact, mobile, and plug&play system, designed to perform: -Manual laser welding: Up to 4mm on carbon steel/stainless steel and 3mm on aluminum, with or without wire feed. -Laser cleaning: Rapid removal of rust, paints, oils, and oxides. -Laser cutting: Precision cutting of sheet metal with limited thickness. -Weld bead cleaning: Aesthetic finishing and passivation of the weld bead after processing. ADVANCED SAFETY AND COMPLIANCE WITH EUROPEAN DIRECTIVES The machine has been configured to meet the most stringent European industrial safety standards. It is equipped with: Dual-channel safety interlocks to ensure redundancy and maximum reliability of the laser emission locking systems. Dedicated safety interlock switch, designed to be directly connected to a control cabinet or a protective welding curtain. This ensures that the laser cannot be activated if the perimeter barriers are not secured. Contact interlock on the ground clamp and Category 0 emergency stop button. MAIN TECHNICAL DATA Laser Source Power: 1500W (continuous wave CW) Wavelength: 1064 - 1080 nm (internal Class 4) Power Supply: 220V Single-phase, 50/60Hz Total Power Consumption: ~7 kW Cooling: Integrated 16L water chiller for continuous and intensive operation cycles and fan. Wire Feeder: Automatic and integrated into the cart. Interface: Color touch-screen with pre-set parameter library. Overall Dimensions (LxWxH): 1300 x 600 x 1600 mm Weight: 205 kg Protection Rating: IP54 Cjdjzw Uf Tjpfx Albjhb INCLUDED EQUIPMENT The system is supplied complete with everything needed for production: machine body with chiller, manual laser torch with cable harness, wire feeder, ground clamp, and a comprehensive kit of consumables (replacement protective lenses and a set of copper nozzles for various functions). SALES TERMS AND LOGISTICS Condition: New machine (Ex-Demo trade show 2026). Price: 40% discount from the list price. Delivery: Ex Works (EXW) at our facility in Settimo Torinese. Shipping: Inspection and direct pick-up at our facility are possible. If transport is required, packaging and shipping costs will be calculated separately upon request from the buyer. Documentation: User and maintenance manual, and CE certification. Contact us to receive the complete technical data sheet or to view the machine in operation. OR REQUEST A QUOTE FOR A NEW MACHINE!