Used 2-Achser Tandemanhänger - 13.000 L - 1 Kammer for sale (120,756)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 Rsdpfxeuxfu Nj Ahcscf - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Rcsdpfxeylng Us Ahcjf Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Rcodpfx Ahot Hw Iijcef

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: -Welded frame -Multiplex walls -4x Lashing eyes Net: €3,907.56 / Gross: €4,650.00 Article number: SPL115251315.22 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 130 x 150 cm • External dimensions (L x W x H): 385 x 178 x 208 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 475 kg • Payload: 1,025 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and multiplex walls • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized Rsdpfx Ajzu N N Uehcscf • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsion-resistant due to its stable construction • 6 lashing eyes recessed inside on the side edge (1000DaN/kg), TÜV certified! • Battery-powered interior light, for free positioning • Tailgate with gas struts and non-slip surface • Continuous interior height: approx. 148cm • Continuous interior width: approx. 122cm • 2x maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT inertia coupling and parking brake • Very stable, securely screwed V-drawbar • 13-pole connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair - Workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L Rcodpfx Asxyw Enohcof -Horn/Ultrasonic Sonotrode: Type 118.858/1 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/260/H70 mm -Weight: 7.8 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: H-frame, railing Equipment: - 6 lashing eyes - Welded frame - H-frame at the front Net: €2,079.83 / Gross: €2,475.00 Article number: AZL113251337.01 Technical data: • Brand: Hapert Trailers • Model: Azure L-1 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 250 x 130 x 37 cm • External dimensions (L x W x H): 382 x 178 x 132 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Tare weight: 330 kg • Payload: 1,020 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized with profile channel on the outside • Accessories such as tarpaulin buttons, hooks or ring eyes can be mounted with hammerhead screws without drilling. Rcsdezu N Rxspfx Ahcjf • Screen-printed plywood floor, continuous without a joint, non-slip and waterproof • Rear door made of aluminum in proven Hapert design • Side panel retaining ropes on the rear door • Hinges for the rear door welded to the frame • Stable eccentric locks for the rear door, recessed in the side panel profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Reinforced, securely screwed V-drawbar • Steel fenders • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extensions • Many stable cross members, resulting in high point load capacity • Lateral side panel struts welded (increased lateral stability) • H-frame at the front, detachable (front wall grid) • Perforated railing on three sides, 6 cm (Combi Protect Rail), also usable with locking bars and lashing straps - round holes 25 mm, oblong holes 54x25 mm • 6 lashing eyes recessed inside on the side edge (1000 DaN/kg), TÜV certified! • Maintenance-free rubber spring axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Rcsdpfx Ahjzpbufjcsf Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: used, empty load weight: 3,770 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 08/2027, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 2-axle tandem tank trailer – Manufacturer: HLW – First registration: 12.03.2014 – Number of axles: 2 – Suspension: Air – Axle type: BPW-Eco-Plus – Brakes: Disc – Length: 5650 mm – Width: 2550 mm – Height: 3320 mm – Tare weight: 3770 kg – Next inspection date: 08.2027 – Body manufacturer: HLW – Tank material: Stainless steel – Total tank volume: 13000 L – Number of tank compartments: 1 – Baffles – Insulated – CIP cleaning system Rcsdezfpz Sepfx Ahcef

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Rodpoyhhn Defx Ahcecf Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) Redpfxey Auh Io Ahcocf * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: used, maximum load weight: 24,780 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 11/2006, * Schwarmüller HKS 2/E-S1 * 2-axle Rcodpfx Ahsnpyg Escjf * 1st axle liftable * VIN: VAVSAK2356H239756 * Unladen weight: 6,220 kg * Payload: 24,780 kg * Gross weight: 31,000 kg * Axle load: 9,000 / 9,000 kg * Trailer length: 8,960 mm * Trailer width: 2,550 mm * Trailer height: 3,250 mm * Tyres: 385 / 65 R 22.5 * Net price * All information without guarantee Tel./WhatsApp:

Condition: used, first registration: 07/2015, Year of construction: 2015, Tang EA 48 Ultralight Tautliner Curtainsider Trailer with Sliding Roof • Air Suspension • ABS • Tire Size: 215/75 R17.5 Rodewmn Rqepfx Ahcocf • Tire Condition: Average ~ 18 mm • Unladen Weight: 2,020 kg • Gross Vehicle Weight: 4,800 kg • Load Capacity: 2,780 kg Body: • Length: 7.78 m • Width: 2.5 m • Height: 3.05 m • Volume: 59.33 m³ - German Trailer! - First Owner! - Very Good General Condition! - New MOT/SP upon request and for an additional charge! Subject to errors and prior sale!

Condition: new, Year of construction: 2025, Singel band decoiler OD-L 1250/1: - 5 arms, Roller bearings, with disc - Loading capacity: 1.000 kg Rcjdpott Iqzjfx Ahcof - Working width: 1.250mm - Inner diameter 280-520mm - Delivery time: 10 days

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Elution / Solution Vessel Volume: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Operating pressure: -1 / +3 bar Test pressure: As per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: As per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Single unit inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test Rjdjykkhropfx Ahcecf The vessel was tested as part of a documented FAT. The tests included, among others: • Verification of welding documentation • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness inspection • Sensor calibration check • Layout and dimensional inspection • Documentation review The complete FAT report including test protocols is available. SPECIFICATION • Double jacket for heating/cooling • Entirely made of stainless steel 316L • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation ready (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project overrun • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available DOCUMENTATION – complete and structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy check • Internal pressure test • Calibration certificates • Assembly records • Drawings (detail and overall) • Operating and maintenance manuals Complete documentation file available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project build in true pharmaceutical quality with verified pressure design, full PED conformity (Module G), documented FAT testing, and comprehensive quality documentation. Project-level quality for sterile applications – available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Rcedpfxoy Ir Hrj Ahcef Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Rsdpfeykkk Hex Ahcecf Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Rcjdpfsrk Ebkex Ahcef Pump technology: optional on request Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: used, mileage: 208,000 km, power: 96 kW (130.52 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro6, loading space length: 3,740 mm, loading space width: 2,020 mm, loading space height: 2,100 mm, Equipment: ABS, central locking, soot filter, Boxer 2.0L, 130 hp. Three-axle. EURO 6. FGS plywood box body with doors and a rear ramp. Dimensions: 3.74 x 2.02 x 2.10 m. 3.5 tons. Toll-free. Spoiler, 2 tie-down rails, central locking, 3-seater, armrest, plastic-coated floor, LED lighting with motion sensor in the box body. Aluminum rims on the rear, airbag, 6-speed transmission, ABS, ASR, aluminum frame on the rear, painted. =====German registration + 1 previous owner + white (neutral color)=====Detailed view of the vehicle // Detailed walkaround of the car: ?v=zRXJvn1Wd-E ====Daily purchase of commercial vehicles, trade-ins also possible==== Rcedjzriyhjpfx Ahcof Price: 10,800 EUR net. Rearview camera.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Rjdoxmt Eqjpfx Ahcscf

Condition: used, mileage: 104,525 km, power: 120 kW (163.15 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * First owner * Sliding door on both sides * Rearview camera * Tow hitch * 120 kW engine * TÜV (technical inspection) valid until 2027/9 Rjdpfxszrq Dzs Ahcjcf * Numerous dents and dings Special equipment: Preparation for tow hitch, Audio system: radio with CD player (MP3 compatible) - display integrated, radio remote control on the steering wheel, Bluetooth hands-free system, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, right, floor panel in the cargo area, reinforced rear suspension, metallic paint, sliding door cargo/passenger compartment left and right with glazing, seats in the driver's cab: driver's seat suspended, underride guard, USB connection, interior paneling in the cargo/passenger compartment: half-height Additional equipment: Airbag, driver's side, exterior mirrors with wide-angle view, turn signals integrated into exterior mirrors, colored, traction control system (ASR), body/superstructure: high-roof van standard, upholstered headrests, fuel tank: 90 liters, cargo area partition, steering column (steering wheel) height adjustable, engine 2.0 liters - 120 kW Blue-HDI FAP CAT, wheelbase 3450 mm, spare wheel in driving condition, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: driver's seat with lumbar support, start/stop system, permissible total weight 3.50 t.

Condition: excellent (used), Professional industrial vacuum cleaner KÄRCHER IVR-L 40/12-1 designed for use in production facilities, workshops, and metalworking applications. This unit is ideal for collecting liquids (such as coolant and oil) as well as metal chips. Its robust construction, large tank, and mobile base make this machine highly practical for daily industrial operations. ⸻ Rcodpfx Ajyxwhijhcef ⚙️ Applications: • CNC machines • Metalworking (chips + emulsions) • Workshops and manufacturing • Industrial liquid collection ⸻ 🔧 Technical specifications (typical for this model): • Model: IVR-L 40/12-1 • Series: Kärcher Professional • Power supply: 230V • Tank capacity: approx. 40L • Intended use: liquids + chips • Mobile design on wheels ⸻ 🛠️ Condition: • Used machine • Fully operational, tested • Very good visual condition • Normal signs of use (visible in photos) ⸻ 📦 Included: • Kärcher IVR-L 40/12-1 vacuum cleaner • Suction hose • Power cable ⸻ ⭐ Advantages: ✔ Industrial-grade Kärcher Professional quality ✔ For liquids and solid contaminants ✔ Perfect for workshops and production ✔ Mobile, stable on wheels ✔ High durability and reliability ⸻ 🚚 Shipping: Shipping by courier or on a pallet possible. Personal collection available.

Condition: used, maximum load weight: 35,150 kg, overall weight: 40,000 kg, axle configuration: 2 axles, first registration: 01/2020, loading space volume: 31 m³, Equipment: ABS, Stock no. 5774 31,000 Liter Spitzer Cement Silo Trailer with Hydraulic Compressor / 2 Compartments / Aluminum Rims ---- * Manufacturer: Spitzer * Model: SF 2731/2P * First registration: 01/2020 * Gross vehicle weight: 40,000 kg * Unladen weight (according to registration): 4,850 kg * Payload: 35,150 kg * Axles: 3x BPW with liftable first axle / disc brakes * Suspension: Air suspension * Tires: 385/65 R22.5 approx. 50% on Alcoa aluminum rims * Color: Blue * Internal inspection valid until 01/2030 * External inspection due * EBS Wabco * Volume: 31,000 liters in 2 compartments (15,200 liters / 15,800 liters) * GHH Rand compressor at the front of the trailer, hydraulically driven, Type CS80R/1, year 2024 * 1,000 – 2,000 rpm * Max. Capacity: 701 m³/h, 2.5 bar, 48 kW * Pressure tank: 2 bar * Operating temperature: -40°C to +80°C * 2 compartments * 3 screw-type manhole covers * 2 hopper cones with outlet to the right, DN80 Rsdpfx Aoyz H Svjhcocf * Catwalk for the operating platform at the rear, pneumatically operable from below, on the left side * Fluidizing mats * Individual mudguards * Reversing camera * LED work lights on sides and at the top rear * LED reversing lights * Triple hose storage tubes, left and right * Heavy-duty landing gear * 1st owner German trailer! German documents! 1st owner! Very good condition! Notice regarding potential errors in the advertisement: Despite careful preparation, isolated errors may occur in the description or details. We do not accept liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or for further questions.

Condition: used, This is a rack trolley from the premium manufacturer Rational, suitable for the XXL model combi-steamers SCC/CM/CMP in the 20-2/1 GN size. RRP (gross): €2,400, our special price: €1,495 (gross) You will receive an invoice including VAT. Service: We are happy to assist you in arranging a certified Rational customer service technician. Looking for a specific Rational model? Contact us—we have access to a wide range of new and used equipment. We are glad to advise you on all device types. Our used equipment service for you: • 6 months warranty on electrical parts (limited to replacement of defective components, excluding labor costs) • High-quality branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning Rcedpfjypcfyjx Ahcef • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice before and after your purchase • Provision of user manuals, wiring diagrams, and spare parts • Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 772 x 1,016 x 1,717 mm Clearance, lowest tray to cooking chamber opening: 50 mm Clearance, highest tray to cooking chamber opening: 87 mm Max. loading height: 1.60 m 20 tray slots 2/1 GN With container lock Accessible from both sides U-rails 4 tandem swivel castors (2 with brakes – metal parts made from stainless steel) Removable and drainable drip tray Rail spacing: 63 mm Weight: 65 kg Material: Stainless steel Item no.: 60.22.086 Capacity: 20 x 2/1 GN roasting and baking trays, racks 12 x H6-1/1 chicken grill racks (up to 1,500 g) 12 x H8-1/1 chicken grill racks (up to 1,300 g) 12 x H10-1/1 chicken grill racks (up to 950 g) 40 x 1/1 GN, 20, 40, 55 mm deep 12 x 1/1 GN, 65, 90, 100 mm deep Use for other containers: 1/1 GN, 2/4 GN crosswise Corrosion-resistant stainless steel (CNS 1.4301) Condition: Used Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the item in person? You can reach us by phone during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit on chassis with 4 hydraulic jacks -Motor: 0.75 kW -Pressure: up to 350 bar -Flow rate: 2,5 l/min -Individual components: see photos Rcedpjv Sp U Nefx Ahcof -Dimensions: 1040/460/H880 mm -Weight: 180 kg

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) Rcsdpfx Asy D An Sohcof - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person