Second-hand machinery for sale (200,000)

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Kodjz Tf D Rjpfx Ahbedu Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,631 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 125 mm, fuel type: electric, mast type: duplex, fork carriage width: 1,070 mm, fork length: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,700 mm Free lift: 125 mm Fork length: 1,400 mm Fork carriage width: 1,070 mm Fork width: 161 mm Fork thickness: 57 mm Fork adjustment range: 560–2,080 mm MACHINE DETAILS Mast type: Duplex Power: 20 kW Front tires Kdodpfx Asz Hvl Dshbou Tire type: Non-marking Tire size: 23 × 10–12 Tire condition: 40–60 % Rear tires Tire type: Non-marking Tire size: 18 × 7–8 Tire condition: 20–40 % Battery voltage: 80 V Battery capacity: 625 Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2021 Battery condition: 40–60 % Unladen weight: 5,593 kg Overall length: 2,479 mm Overall width: 1,195 mm Overall height: 2,585 mm Operating hours: 3,631 h EQUIPMENT Load protection grid Push fork Side shifter Fork positioner 3rd valve 4th valve Rear work light Front work light Heater Solenoid valve Full cabin Air conditioning CE certificate Non-marking tires LED lighting Seat Noise-reduced hydraulic pump Panoramic mirror Rear dirt guard Load weight indicator Automatic parking brake Dual pedal Air-suspended comfort seat with fabric cover Spring-mounted cabin Reading light Horizontally and vertically adjustable armrest Side battery changer with access pallet including side battery cover I_Site fleet management including PIN code and shock sensor Smart Access Additional cable inside the mast on the left side for the 5th hydraulic function Radio

Year of construction: 2010, condition: excellent (used), functionality: fully functional, TRAVEL RANGES: X-AXIS (longitudinal) 370 Y-AXIS (transversal) 130 Z-AXIS (vertical) 140 A-AXIS (automatic workpiece rotation) -180° ÷ +90° Kdsdpe Aa Dqhjfx Ahbeu U-AXIS (bar positioning) 1020 ELECTROSPINDLE: Maximum power in S1 (kW) 1.1 Maximum speed (rpm) 11500 Tool mounting taper ISO 30 Collet chucks, Weldon expanding chucks R16 Minimum quantity lubrication system ON-MACHINE TOOL: Maximum number of tools in magazine 6

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Kodpfx Ahoz I Tciebodu Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Kdsdpsz Tf Enefx Ahbou Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Overall length: 5,200 mm Kdodpfx Ajz R Dqwehbsu Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Heater Windshield wiper Comfort seat with lumbar support Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Condition: ready for operation (used), Year of construction: 1996, operating hours: 9,944 h, load capacity: 8,000 kg, lifting height: 3,900 mm, mast type: duplex, fork length: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 3,900 mm Mast type: Duplex Fork length: 1,500 mm Fork width: min. 580 mm Fork width: max. 2,300 mm MACHINE DETAILS Fuel type: Diesel Kdjdpfx Ahsz Nizlobju Engine manufacturer: Deutz Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,230 x 3,200 mm Unladen weight: 11,000 kg Overhead height: 3,200 mm Transport packages: 1 piece Operating hours: 9,944 h EQUIPMENT Rotator fork adjustment License plate CE marking Documentation including vehicle registration document, oil leak, sale in current condition.

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! Kdjdpfoz Izdnjx Ahbju TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and versatile use through pneumatic height adjustment. Kodpfx Ahj Aa A Eqjbjdu Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1 - 20mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel drilling on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then done pneumatically from the front. Cross adjustment: 430mm, stepless or in a 12mm grid. Maximum height adjustment: approx. 100mm above the table height. Drilling stroke: approx. 150mm. 2 pneumatic workpiece clamps. Grid rail for quick adjustment on the side in a 12mm grid. Stop for length adjustment during elongated hole milling. 2 swiveling workpiece supports. Special stop system, approx. 3.1m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, mullions, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few paint spots have been touched up. Almost new condition, see original photos. Dimensions: approx. 1500 x 900 x 1400mm (L x W x H), weight 300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, We offer in good conditon Hurco VMX42i with BT40 spindle and Winmax software. X-Axis travel: 1067mm Kedpfxo Aa Dd Ie Ahbsdu Y-Axis travel: 610mm Z-Axis travel: 610mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Kodpfxj Aa Ayuo Ahbedu Control: HDH iTNC640 Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar Tool measurement: BLUM Laser probe: Heidenhain electric handwheel: Yes

Condition: used, Year of construction: 1970, centre height 120 mm spindle bore 20 mm copying device ja kW Kdodpfxozndt Is Ahbju weight of the machine ca. 3 t

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K Ksdpfx Asz I Tt Iehbjdu MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, torque: 1,890 Nm, controller manufacturer: heidenhain, controller model: TNC 530, table load: 10,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 33,000 W, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 136, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, X-axis: transverse movement of the table, 4000 mm Y-axis: vertical movement of the head, 2500 mm Z-axis: longitudinal movement of the column, 1500 mm W-axis: longitudinal movement of the quill, 600 mm Feed rates for X/Y/Z/W axes: 5/5/5/5 m/min Rapid traverse rates for X/Y/Z/W axes: 20/20/20/15 m/min Total number of tables: 3 – No. 1 pallet 1300 x 1600 mm (used for head changes) + No. 2 pallets 1300 x 1600 mm with 2 extensions 400 x 1300 mm Rotary table with rotation speed of 0 - 120 degrees/min INCLUDED ACCESSORIES: Ksdpfe Aa Awajx Ahbjdu 2-spindle indexing head Quick-change system with BERG clamping jaws for mounting accessory heads Coolant passage through the spindle Chip evacuator for X=4000 mm travel RENISHAW RMP60 probe Robot tool changer with 136 positions AUTOMATIC pallet changer (1 pallet for accessory changes + 2 pallets for part machining) HEIDENHAIN TT140 tool probe CE marking

Condition: excellent (used), Year of construction: 2004, Digital display, Heidenhain Max. turning diameter over bed: 570 mm Turning length: 1500 mm Kdodpfx As Aa D Dbohbou Max. spindle speed: 2,240 rpm Multifix size C 3-jaw chuck, diameter 250 mm Fixed steady rest, diameter 20 – 315 mm Tailstock

Condition: excellent (used), Year of construction: 1998, Control system: Heidenhain TNC 124 Travel ranges X/Y/Z: 500 x 400 x 400 mm Spindle speed: 4,500 rpm Tool holder: SK 40 Kdjds Aa D Dhepfx Ahbsu Manual rotary table with tilting axis: 700 x 500 mm

Condition: used, Year of construction: 1990, Max. saw blade diameter: 350 mm Manual saw feed Kjdpe Aa Ac Aefx Ahbsdu 2 sawing speeds Coolant lubrication

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Kodpfx Aj Aayk Rshbodu Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. Kdedpfs Aa Aufox Ahbou - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2016, TECHNICAL DETAILS Control System CNC control: FANUC Professional 5 Axes and Travel Ranges X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis: 360°, continuous rotation A-axis: 150° (+30° / 120°) C-axis measuring system: Rotary encoder A-axis measuring system: Rotary encoder Feed Rate and Rapid Traverse Feed rate X-axis: 32 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-axis: 18 m/min Rapid traverse C-axis: 18 m/min Work Table and Workpiece Table dimensions: 500 mm Maximum workpiece size: 650 × 500 mm Workpiece weight: max. 350 kg Kedpfx Ao Aayfhshbedu Spindle Spindle speed: max. 14,000 rpm Tool System Tool holder: HSK-A63 Tool magazine: 323 positions Tool changer: Double gripper Tool diameter: max. 70 mm Tool diameter with adjacent occupied positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 8 kg Operating Hours Total operating time: 63,813 h Spindle running time: 30,592 h Machine Dimensions and Weight Length: 3,550 mm Width: 2,900 mm Height: 3,200 mm Machine weight: 15,700 kg EQUIPMENT Electronic handwheel Chip conveyor Measuring probe

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Max. table load kg: 1.500 DIMENSIONS Machine weight kg: 23.900 EQUIPMENT & OPTIONS • Mazatrol L32B CNC control Kdjds Aa A Tuepfx Ahbeu • CO2 laser resonator, 4,000 W rated output

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 380 V, pressing force: 160 t, stroke length: 350 mm, operating speed: 80 mm/s, reverse speed: 90 mm/s, table width: 4,175 mm, throat depth: 500 mm, clearance between the columns: 3,300 mm, total length: 4,650 mm, total width: 2,150 mm, total height: 3,200 mm, overall weight: 16,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, CYBELEC DNC 80 control system 6 controlled axes: Y1-Y2-X-R-Z1-Z2 Kdedpfszybrrsx Ahbju Active hydraulic compensation LASER safety barriers Standard tool kit CE marking

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,350 mm, travel distance Y-axis: 560 mm, overall weight: 6,100 kg, total width: 2,200 mm, total height: 2,600 mm, spindle motor power: 7,500 W, product length (max.): 4,600 mm, spindle speed (max.): 1,500 rpm, table length: 1,200 mm, table load: 1,880 kg, table width: 500 mm, number of axes: 3, This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details. Kdedpfx Aho Aa Ay Uobeu - Max. Distance Spindle Center to Table: 700 mm- Table Load Capacity (Continuous): 1,200 kg- Table Load Capacity (Non-continuous): 1,880 kg- Weight of Electromagnetic Plate: 315 kg- Installation Height Table to Bottom Edge of Grinding Wheel: 522 mm- Hydraulic Longitudinal Feed: 1 - 25 m/min- Step Cross Feed: 0.1 - 15 mm/stroke- Continuous Stepless Cross Feed: 50 - 1,500 mm/min- Handwheel Rotation Cross: 5 mm/rev (Graduation: 0.02 mm)- Handwheel Rotation Vertical: 0.25 mm/rev (Graduation: 0.002 mm)- Automatic Vertical Feed: AD 1- Spindle Speed: 1,500 RPM (Infinitely variable)- Spindle Motor: 7.5 kW (400V, 4P, 15A, 50Hz)- Cross Feed Motor: 0.37 kW / 0.7 kW (220V, 6P, 2.1A, 50Hz)- Rapid Feed Motor: 0.75 kW (110V, 6P, 6.1A, 50Hz)- Hydraulic Pump Motor: 3.7 kW- Transformer Tr1: 825 VA- Transformer Tr2: 2,000 VA- Drive Power (Antriebsleistung): 400V, 3P, 34.05A, 50Hz- Coolant System: Coolant device with paper filter and magnetic separator (Capacity: 100 liters)- Mist & Dust Extraction System: Model PSGC-50120AHR, Tank Capacity: 100 l, Output: 50-60 l/min, Motor: 0.55 kW, 400V, 1.8A, 50Hz, Weight: 120 kg- Digital Readout (DRO): 2-Axis Digital Readout on Y-Axis (SINO SDS6-2V, SN: 7201723C0032, Scale: KA-300 1µm - 670 mm) retrofitted in 05/2022- Grinding Wheel Dimensions: 400 x 50 x 127 mm / 355 x 50 x 127 mm (Included KINIK 405 x 50 x 127 mm 32A 46 J 9 V, 33 M/S)- Number of Axes: 3 Axes (X, Y, Z movements with 2-Axis DRO on Y)- Optional Equipment & Features: Parallel dresser (head mounted), Table dressers, Balancing arbor, Balancing scale, Electric handwheel, LED lighting, Alignment feet, 6x Grinding wheel flanges total, Complete hydraulic and electrical system- Travel dimensions: 4.1W x 2.7D x 2.96H m)- Optional spare grinding wheels (including ZISCHE and KINIK brands) and various wheel flanges in stock/storage rack

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm square edge steel 35 x 35 mm L-beam 120 x 120 x 12 mm round bar steel 40.0 mm flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment Kodpfx Ao Aa A Ifehbedu - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2012, Number of spindles 4 St. Number of tools variabel St. Spindle diameter 50 mm Spindle length 320,320,320,160 mm WEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE ----- Machine can still be seen in operation! Includes mechanization/handling equipment. For milling the perimeter of windows, doors, and similar items with non-uniform (varying) profiles. For profiling individual components. PROCESSING UNITS ----- 1. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Synchronous feed device with automatic plunge function 2. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes 3. Profiling Spindle ----- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Kjdpfx Ae Aa A Irohbjdu Radial and axial adjustment: NC-controlled axes Profile Milling Unit (vertical, right-hand side) at the end of the machine ----- Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment with 8 positions Radial indexing with 8 positions for profile milling Includes: ----- Mechanization/Handling system Control System: ----- AALTRONIC (Technical specifications as provided by the manufacturer – subject to change/no guarantee!)