Second-hand machinery for sale (200,000)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. Pedpfoh U Rzgex Adlerc ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C Prsdpe Aghkujfx Adljc For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, running gear chassis -Type: unfortunately without a type designation -Beam width: up to 155 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 250/195/H180 mm -Weight: 9.5 kg Predpfxs Agfxvs Adloc

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Prjdps Agfr Tofx Adlsc -Manufacturer: Tigrip, Sheet metal clamp: Lifting clamp type T2.0/100 -Grasping range: 0-100 mm -Load capacity: 2000 kg -Transport dimensions: 370/350/H100 mm -Weight: 17.6 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, actuation type: hydraulic, controller model: Delem Touch, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 100 mm, overall weight: 7,700 kg, total length: 3,600 mm, total width: 1,650 mm, total height: 2,400 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Technical Data Manufacturer: Trumpf Type: TruBend 3100 – B26 Year of Manufacture: 2014 Capacity: 100 t Bending Length: 3060 mm Distance Between Uprights: 3384 mm Stroke Length: 200 mm Dimensions: approx. L 3.6 x W 1.65 x H 2.40 m Weight: 7.7 t Equipment Podpfxe Agck Se Adljrc - Controlled axes: X, X1, R, Z1, Z2 - Self-adjusting combined crowning system - Machine control: Multi-Touch Delem - Amada tool clamping system, top and bottom - Work area lighting - Laser-safe safety light curtain - Control panel with foot pedal - Large tool set All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, length 720 mm width 500 mm Prodog A U S Ajpfx Adlsc height 700 mm weight of the machine ca. 0,7 t dimensions of the machine ca. 1200x640x700 m

Condition: used, power capacity 0 kW volt 0 V Predpfod Ihaljx Adlsc ampere 0 A Data please see typeplate.

Condition: used, power capacity 0 kW volt 0 V ampere 0 A Podpfx Ajd Ihahodlorc new motor with options G45 und K42 Data please see typeplate.

Condition: used, external diameter 400 mm internal diameter 127 mm width 45 mm unused gear grinding wheels from a Hoefler machine! Price per piece 13 white, 6 blue available Prodpfx Aju Sbguodlsc

Condition: excellent (used), Year of construction: 2018, 621 USED Doughnut filler OPELKA MAGIC BAKER. EXTERNAL DIMENSIONS (in cm): - W: 57 - L: 45 - H: 62 TECHNICAL DATA: - year of manufacture: 2018 The price is a net price. Paid options available: transport. Pjdpfx Ade Agczzolorc Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 1982, weight of the machine ca. 0,2 t Podpfo Agci Hsx Adlorc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,935 mm, total width: 5,500 mm, table width: 1,100 mm, table length: 560 mm, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 4,800 mm, number of axes: 3, This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details. Prodpfx Ado Agb E Rslec - CNC Control: HEIDENHAIN TNC 620 (SLIMline Control Panel / MC 7420D PC & Screen + TE 715D Keyboard)- Table Clamping Surface: 1,100 x 560 mm- Max Table Load (Center): 800 kg- Table Loading Height (Floor to top edge): 850 mm- T-Slots: 4 / 18H12 (Distance between slots: 100 mm; 1 reference slot: 18H7)- Spindle Speed Range: 20 – 12,000 rpm- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 82 Nm / 54 Nm- Tool Taper / Interface: SK40 (DIN 69871 / DIN 69872 Form A/B pull stud)- Tool Clamping Force: 10 kN (SK40 / BT40)- Tool Magazine Capacity: 30 pockets (chain type)- Max Tool Diameter (with adjacent tools): 80 mm- Max Tool Diameter (with free adjacent pockets): 125 mm- Max Tool Length (from spindle nose): 300 mm- Max Tool Weight (Automatic tool change): 8 kg- Max Total Magazine Load: 240 kg- Feed Drives: AC Servomotors on X, Y, and Z axes- Rapid Traverse Rate (X / Y / Z): 30 / 30 / 30 m/min- Feed Speed Range (X, Y, Z): up to 20,000 mm/min- Position Measurement Resolution: 1 µm- Positioning Uncertainty P (VDI/DGQ 3441): 6 µm- Chip Management: Integrated scraper conveyor (bande grattante, 220 L coolant tank, 20 L/min pump at 5 bar)- External Coolant & Air Supply: External adjustable coolant nozzles and blow air (M25)- Internal Cleaning: Work area rinsing / flushing gun (pistolet de rinçage)- Manual Axis Movement: Electronic handwheel (HR 510FS)- Access / Safety Authorization: DMG MORI SMARTkey electronic mode selector- Apparent Power: 32 kVA- Rated Supply Voltage: 400 V AC ±10% (3/N/PE)- Mains Frequency: 50/60 Hz- Control Voltage: 230 V AC / 24 V DC- Full Load Current (In max): 52 A- Main Fuse: 63 A- Short Circuit Breaking Capacity (Ics): 0.63 kA- Basic Machine Weight: approx. 5,400 kg- Chip Conveyor Weight: 500 kg Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2021, load capacity: 3,500 kg, lifting height: 4,750 mm, total length: 4,330 mm, · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 631 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7350 kg / 850 kg Psdpfx Ade Agct Tslsrc · Vorderachslast ohne Last / Hinterachslast ohne Last 1710 kg / 3070 kg · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 2 · Vorderspur 1044 mm · Abstand zwischen den Hinterrädern: 1108 mm · Sitzhöhe: 972 mm · Gabelträger DIN 15173 A/B: 3A · Gangbreite für Paletten 1000 x 1200 quer: 4711 mm · Wenderadius: 2680 m · Fahrgeschwindigkeit (beladen / unbeladen): 21 km/h-21 km/h · Hubgeschwindigkeit (beladen / unbeladen): 0.50 m/s-0.50 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s-0.30 m/s · Zugkraft 1900 daN · Steigfähigkeit - beladen 24 % · Festellbremse: Hydraulik bremst durch Druckverlust · Nenndrehzahl: 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 3 - 1826 cm³ · Steuerung: Elektronisch · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte: 230 bar · Ölmenge für Anbaugerät: 45 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 81 dB

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Pjdpfx Adozl T R Dolsrc Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570 Prjdpfx Ade Agbfvslec   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - Max.Hubhöhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 - Max. travel speed 40 km/h Preds Agcuispfx Adljc - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Condition: good (used), Year of construction: 2013, clamping force: 13,000 kN, _KRAUSSMAFFEI KM 1300-8100 MX_ Year: 2012 Working hours: 52,000 h Clamping force: 1,300 tons (13,000 kN) Controller: MC5 _CLAMPING UNIT_ • Tie bar distance (H × V): 1,570 × 1,270 mm • Platen dimensions: 2,210 × 1,910 mm • Opening stroke: 2,350 mm • Mould height min./max.: 700–1,400 mm • Max. daylight: 3,050 mm • Max. mould weight: 29,000 kg _INJECTION UNIT_ • Screw diameter: 95 mm • Shot volume: 3,721 cm³ • Shot weight (PS): 2,642 g • Injection pressure: 2,173 bar • Injection rate: 659 cm³/s • Plasticising capacity: 105 g/s _ADDITIONAL EQUIPMENT_ ✅ Sepro Robot 4050 S3 Trans ✅ 6× Hydraulic core pullers (3+3) ✅ 6× Hydraulic shut-off nozzles ✅ 16× Hot runner control zones ✅ 2× Air valves ✅ Euromap 67 robot interface ✅ Anti-vibration pads _DIMENSIONS & WEIGHT_ Predpfx Aj Agcuqjdlsc • Dimensions: approx. 13 × 4 × 3 m • Machine weight: 64,000 kg • Pump motor: 110 kW • Heating capacity: 59 kW

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, HOT-DIPPED GALVANIZED, reinforced design, air-suspended with lift axle, axle load gauge for axle load, platform length approximately 4,180 mm, low-loader length approximately 9,400 mm, loading height approximately 900 mm, front wall approximately 1,600 mm high, 14 x stake pockets in the outer frame, 3 x transverse stringer strips, 24 x lashing eyes, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, surcharge for aluminum ramps = price: €2,200, subject to printing errors, errors and changes, sample images, more details at: ! Prsdj Agfraepfx Adlec

Condition: new, Year of construction: 2026, Kleemann MC 120 PRO / MC 120 Z - jaws, 20%Mn2%Cr, fixed jaw, moving jaw, liners, complete set or sold separately. Fixed jaw: 2457909 / 2457892 - 1588 kg - 20%Mn2%Cr Moving jaw: 2457878 / 2457875 - 2420 kg - 20%Mn2%Cr Available in stock - shipping from Poland. Available as a set or individually. Catalog numbers: 2457909, 2457892, 2457878, 2457875 Prjdpfs Agfgdsx Adlsc Wedges, pins, side liners - cheek plates, and other parts also available. Only with us, the chemical composition of the castings comes with a QUALITY CERTIFICATE, confirmed by a spectrometer. Don't buy cheaper, lower-quality castings; a lower amount of manganese or chromium can reduce the lifespan of the jaws by up to half! We offer the widest range of spare parts for crushers and screens in Poland. For both stationary and mobile machines. Including brands such as: Brown Lenox; Bruce; DKT; Extec; Finlay; HARTL; Hazemag; PSP; DSP; Keestrack; Kleemann; Komatsu; McCloskey; Metso; MFL; Nordberg; Parker; Omega; Pegson; OM; Powerscreen; Premiertrak Terex; Red Rhino; Rubblemaster; Sandvik; SBM; Tesab, and others.

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes per 6 t, 20 x lashing brackets per 6 t, 18 x lashing holes, 7 x stanchion pockets, centered, 14 x stanchion pockets in the outer frame, 2 pairs of container locks, surcharge for bulkhead approx. 1.600 mm high, pluggable Price: 1,500 ¤ , Surcharge for extendable drawbar Price: 1,500 ¤ , Surcharge for 4 x warning signs with lighting Price: 800 ¤ , , Also available in loading area length 9,000 mm or 10,500 mm! , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Pedpfe Agfn Nex Adlorc

Condition: used, functionality: fully functional, type of input current: three-phase, total length: 1,420 mm, total width: 830 mm, total height: 1,760 mm, overall weight: 500 kg, OMGA V313 double-blade miter saw, adjustable angles Double-blade saw for cutting at angles of 45-40-30-22 degrees. Prodpfo Agfh Aex Adlsc Blade diameter: 300 mm Arbor diameter: 30 mm Blade speed: 3000 rpm Motors: 2 x 2.2 kW Air pressure requirement: 5-7 bar Cutting width: 60 mm Cutting height: 100 mm Machine dimensions: length 1420 mm, width 830 mm, height 1760 mm Machine weight: 500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Prodpfjy Rnb Dsx Adljc

Year of construction: 2000, condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SIL 25/75 -Grasping range: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg Prjdpfx Adovxruxolsc

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide. Ramps with grating. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Pedpfxj Agfm Do Adlerc Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area with a sloping rear. Internal loading area width: 2,480 mm. Removable rear ramp. Front opening for through-loading. Vehicle with temporary registration. Also available with a 5,300 mm loading area length! -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: !

Condition: used, empty load weight: 4,850 kg, maximum load weight: 14,150 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 05/2015, loading space length: 5,540 mm, loading space width: 2,420 mm, loading space height: 660 mm, loading space volume: 8 m³, suspension: air, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Air-suspended, tires: 435/50 R 19.5, 600 mm drop sides, 10 x lashing eyes, , surcharge for, aluminum ramps Price: 850 ¤, , customer vehicle , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpfj Agfnlox Adlsrc