Used semitrailers for sale (4,341)

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Duedpfxezkx Ifo Aayew Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt of equipment: - Extendable loading platform with a rear slope of approximately 1,000 mm x 8°. - Hardwood flooring, approximately 48 mm thick, with a non-slip steel plate covering over the axles. - JOST kingpin (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). - BPW axles and suspension, 2 fixed axles, 1 self-steering axle, technical axle load: 12,000 kg each. - Air suspension with lifting and lowering valve. - Braking system in accordance with EU regulations with EBS-E (2S2M). - 2-inch kingpin. - One galvanized steel front wall, approximately 400 mm high. - Load measuring device for determining axle loads, including a load diagram. - Aluminum side panels and rear wall on the gooseneck, plug-in type, approximately 2,440 x 400 mm (L x H). - One galvanized toolbox, integrated into the sloped gooseneck (± 47 kg). - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg). - 6 pairs of spar pockets for plug-in spars, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg). - Extensions, galvanized, extendable by approximately 230 mm on each side (± 230 kg). - Lift axle on the front axle. - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle. - 2 LED reversing lights mounted on the rear panel. - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg). - Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg). - A mounting bracket for a rotating beacon on the warning panels. - One rotating beacon supplied separately. - HRM metallization (High Resistance Metallization). - Top coat in a single color, RAL 3002 carmine red. Dedpfx Ajzkx Ileaysuw

Condition: used, maximum load weight: 34,070 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 05/2027, loading space volume: 92 m³, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Dusdjzkx H Ijpfx Aayow Vehicle The semi-trailer is based on a self-supporting chassis made of high-quality S700 steel. The frame runs from the support legs to the rear. Kingpin: 2 inches, mounted on an approx. 10 mm thick fifth-wheel plate St 52-3. Fifth wheel plates for max. fifth-wheel load: 15,000 kg. Axles 3 x 9 t Knapen HD axles, fixed, with disc brakes approx. 430 mm, 10-bolt ET 120. Standard control console with manometers and controls for the air suspension, position: left, in front of the axles. 1st axle as a lift axle, fully automatic via EBS, incl. starting aid (3x brakes). Wireless remote control. Tires and Rims 6 x steel rims. 6 x tires 385/65 R22.5. Components Steel support legs with tiltable base, maximum support load: 50 t, maximum lifting load: 24 t. 6 x semi-round fenders. Anti-spray mats mounted behind the 3rd axle. Standard lighting panel + cover flap. Rear end cross member. A fixed mud flap is attached under the bumper. Bumper according to R58-03. Height approx. 375 mm, ground clearance approx. 450 mm. Plastic toolbox with hinge at the bottom, dimensions approx. 1,000 x 500 x 500 mm, position: left, behind the axles. Aluminum side guards in open design, foldable according to EC regulations. A long ladder, mounted behind the side guard or under the semi-trailer. A retractable ladder with platform for easy access, mounted at the rear of the semi-trailer. 2 wheel chocks, position: 2x left. Broom and shovel holder, mounted on the right in front of the axles. Floor CARGOFLOOR CF 500 SL-C system. The CARGOFLOOR system is equipped with an E-Control. Smooth aluminum floor planks, approx. 10 mm, 21 planks. The floor planks are equipped with aluminum end caps. A stainless steel plate on the rear below the floor for additional wear protection. Front Wall The largest platform on the market is mounted on the front wall. 2 ladders on the front wall, position: left and right. A door is installed in the front wall to allow easy access at the front of the semi-trailer, position: left - opening outwards. Sliding Bulkhead To ensure complete unloading, the semi-trailer is equipped with a sliding bulkhead made of aluminum, a brush to prevent contamination of the guide rails. Ground clearance approx. 100 mm. Side Walls Extra strong top edge profile with rails for the sliding bulkhead. Top edge profile with groove for the bead-edge fastening of the tarpaulin. The side walls consist of an approx. 3 mm inner side and an approx. 2 mm outer side. The side walls are continuously welded over the entire height (inner side) for maximum strength and minimal contamination. Welding is carried out by a high-quality and fully automatic welding process. Incl. side protection tarpaulin, left side. Rear The rear doors are fully welded from wall and frame profiles for additional strength. The doors are equipped with a pneumatic safety latch for safety during unloading. Through-loading height with closed top rail at the rear approx. 2,665 mm. Individual stainless steel locking rod per rear door, heavy-duty design. Top Rail Top rail made of steel, with wedge. Roof Bows 4 pieces of round roof bows, with a diameter of approx. 60.3 mm, position: 1 & 3 & 5 & 7. The roof bow space is divided into 3 compartments of each approx. 4,100 mm. Roof Covering Extra strong roll-up tarp.

Condition: used, maximum load weight: 36,250 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment list available upon request. Frame: Chassis frame made of high-quality steel, but without an outer frame. Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337. With crossmember and container locking mechanisms for accommodating: a) 1 x 45' High-Cube container b) 1 x 40' High-Cube container c) 1 x 30' ISO container, flush at the rear d) 2 x 20' ISO containers e) 1 x 20' ISO container, flush at the rear g) 1 x 45' ISO container Dusdpfx Aszkx Hzoayow h) 1 x 40' ISO container With 1 pair of height-adjustable container locking mechanisms and 3 pairs of foldable center supports, plus crossmember and container locking mechanisms for accommodating: f) 1 x 20' ISO container in the center Frame extension at the rear, mechanically extendable, load capacity approx. 5,800 kg, with spiral cable. Low-maintenance guidance on special plastic sliders and 2 extension rollers. KÖGEL frame extension at the front, manually extendable and mechanically lockable, incl. container guide on the left and right. Designed according to Directive 719/2015. Frame extension in the center, manually extendable and mechanically lockable with the tractor unit. Chassis: Axle lift mechanism on axle 1. Control of the axle lift is fully automatic and load-dependent. Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h. Operation on the chassis via switch. Additionally possible from the cab (switch in the cab necessary - PIN 12). When transporting 30' and 45' containers, the 1st axle CANNOT be lifted! BPW three-axle unit, with disc brakes Ø approx. 430 mm, mounting depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires: Wheels with internal sensors according to UN ECE R141. Tires 6-fold 385/55 R 22.5 UNIROYAL TH 50. 6 steel rims 22.5 x 11.75, mounting depth approx. 120 mm (ET 120). Chassis Components: JOST landing gears, mechanically operated with leveling foot, 24 t lifting capacity. One-sided operation in the direction of travel, on the right. Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with mud flaps. 2 chock blocks with holder. Side protection, according to ECE-R73, closed. Rear underrun protection made of square steel tube according to ECE-R58, screwable. Height of the underrun protection profile min. 120 mm, designed for increased test forces. Brake / Air Suspension System: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. Air suspension system incl. 1 raising and lowering valve, mounted on the left in the direction of travel in front of the axle unit. 2 non-interchangeable coupling heads at the front ISO 1728. Air reservoir for brake system and air supply made of steel (EN 286-2). Rear Impact Protection: Continuous steel rear impact protection, solid, on the end member at the rear. Information Systems: Tire pressure monitoring system according to UN ECE R141. Accessories: Document tube, diameter approx. 105 mm. Mounting on the left in the direction of travel on the side protection. 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounting incl. holder and protective cover on the left in the direction of travel o

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Duodpfx Aajzkx E Rjyew

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). Duedszkx Hnjpfx Aayow 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: used, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt - Equipment Frame 10110.122 Regular ladder frame in lightweight steel construction with continuous cross members. 10115.010 With chassis frame pre-tension. 10300.108 Coupling plate approx. 8 mm thick, with a 2-inch drawbar eye according to DIN 74080 / ISO 337. Chassis I 17160.010 Axle lift mechanism on axle 1. I 17165.103 Axle lift control fully automatic, load-dependent. Starting assistance: Activated by pressing the brake 3 times. 30% overload up to a speed of 25 km/h. 18330.700 Manufacturer of choice: Kögel - Three-axle unit, with disc brakes Ø 430 mm, approx. 120 mm mounting depth. Air suspension with approx. 180 mm travel. Vehicle tires I 20540.037 Tires 6x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L). Chassis components 20110.010 Kingpin supports (manufacturer of choice: Kögel) mechanical with leveling foot, approx. 24 t lifting capacity. Single-sided operation on the right side in the direction of travel. I 21070.117 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 21300.001 2 chock blocks with holder. I 22070.008 Deletion of the standard side protection. I 25010.170 Storage box for storing: 10 side panels, folding battens and rear door or rear flap. Fully enclosed, protected against spray, simultaneously serves as side protection. I 25090.220 Ground clearance (front) approx. 220 mm. I 25620.101 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. I 26110.005 Deletion of access ladder. 27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58. I 71800.020 1 pair of retractable warning boards for overwidth loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Brake/Air suspension system 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection lines), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostics connection via ISO 7638 plug connection. I 32125.010 EBS system (manufacturer of choice). 33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left behind the axle unit in the direction of travel. Driving position is automatically adjusted. 34320.001 2 non-interchangeable coupling heads at the front, ISO 1728. 34410.010 Air reservoir for brake system and air reserve made of steel (EN 286-2). Floor 40510.120 Plate floor approx. 30 mm thick. I 40513.020 Floor sealed around the perimeter. I 40542.023 Girder pockets for square tube inserts approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of girder pocket rails (18 girder pockets per rail: 4 pieces each on the outside + 10 pieces in the middle). Superstructure I 46538.010 Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall I 40532.260 Storage for max. 20 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the Duodpfezkx Hhex Aayjw inside of the front wall. I 41710.201 Front wall approx. 2,000 mm high with volume corner supports made of steel, with profi

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). Dujdpfjzkx Hbsx Aayjw - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° Duedpfx Aaszkx Hujyew - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Condition: used, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 02/2012, loading space length: 7,500 mm, loading space width: 2,230 mm, loading space height: 1,400 mm, loading space volume: 25 m³, Equipment: ABS, Schmitz Gotha SKI tipper body, SAF axles Dsdpfxjy Rvzxo Aayouw Internal number for inquiries: 0526429 * Condition: very good * First registration: 02/2012 * Permissible total weight: 33,000 kg * Unladen weight: 6,110 kg * ABS * SAF axles * Drum brakes Tires: 1st axle: 445 / 65 R22.5, 25% wear, air suspension 2nd axle: 445 / 65 R22.5, 25% wear, air suspension ----Price: €5,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale are subject to change.

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI Dry Liner Box Trailer Basic Information - Model: SZK 18 eLB41-LI - Fifth-wheel height unloaded: 1,150 mm Weights (Approval / Technical) - Kingpin load: 12,000 kg / 12,000 kg - Axle load: 18,000 kg / 18,000 kg - Gross vehicle weight: 30,000 kg / 30,000 kg Dimensions - Body dimensions: 13,620 x 2,480 mm interior length - Internal height: 2,715 mm - Rear door clearance height: 2,650 mm Dedpfx Aaoym Ha Aeysuw - Unladen vehicle height: approx. 4,000 mm - Front body height: 100 mm (including floor) Axles - 2 axles, each with 9,000 kg load capacity - KRONE axles with air suspension and disc brakes - Brake disc diameter: 430 mm - Axle spacing: 8,135 mm - Wheelbase: 1,310 mm - Warranty: 6 years with unlimited mileage Tyres & Rims - 4x 385/65 R 22.5 M+S tyres - KRONE Smart Tyre Monitoring - No spare wheel Brake System - EBS 2S/2M with ABS - Spring-loaded parking brake - Brake system: WABCO Box Body - Closed body design - Sidewalls: 28 mm sandwich panels, steel outer layer, insulated - Roof: 30 mm sandwich panel, PU core, insulated - Internal side forklift protection: 320 mm high - Front wall: steel plate with 9 mm birch plywood lining inside - Rear wall: steel container door with seal - LED light strip on the left in the cargo area - 2 ventilation grilles per side - 2 rows of load securing rails (800 mm / 1,600 mm above floor) Floor - 30 mm waterproof plywood floor (bonded) - Strength according to EN 283 for up to 7,000 kg forklift axle load Lighting - All-LED lighting - Full-LED multifunction rear lights (Hella Gen.2) - LED side marker lights with indicator function - Outline and brake lights at rear upper corner Certificates - EN 12642 Code XL - VDI 2700 Beverage Transport - Daimler Directive 9.5 - CEMT/CM certificate Paintwork - Chassis: RAL 9005 Deep Black - Box body: KRONE White - Roof: RAL 9010 Pure White

Condition: used, empty load weight: 7,204 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 04/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2020, mileage: 606,475 km, Equipment: ABS, Unladen weight: 7204 kg, permissible total weight: 39000 kg, load securing with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,900 mm, tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo space volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system EBS, bolted chassis, portal doors, sliding tarpaulin, connection plug 1x15 and 2x7 pole, anti-splash guard, lifting roof (hydraulic), telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our Value Added Services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Duodpfx Aszkw Dxjayew

Condition: used, empty load weight: 6,494 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2019, next inspection (TÜV): 03/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2019, Equipment: ABS, Unladen weight: 6,494 kg, permissible total weight: 36,000 kg, load securing with certificate, cargo area (L W H): 13,620 mm x 2,480 mm x 2,950 mm. Tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo space volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system (EBS), bolted chassis, swing doors, sliding roof, 1x15 and 2x7-pin connection plugs, antispray, lifting roof (hydraulic), telematics system. You can find our complete vehicle offer at . Interested in financing? With our Value Added Service, we offer you individual financing options, full service and telematics solutions. We are happy to advise you. Dedpfx Aaozkw D Sjyeuw

Condition: used, empty load weight: 8,418 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Equipment: ABS, Unladen weight: 8,418 kg, gross vehicle weight: 36,000 kg, load securing with certificate, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo volume: 88 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, pallet box, electronic braking system (EBS), spare wheel holder (2x), bolted chassis, portal doors, double-deck loading for EURO pallets with beams, hub odometer, connectors 1x15-pin and 2x7-pin, antispray, telematics system. Find our complete vehicle offering at . Looking for financing? With our Value Added Service, we offer you customized financing options, full service and telematics solutions. We are happy to advise you. Dujdpfxezkw Dlo Aayow

Condition: used, empty load weight: 8,625 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2022, next inspection (TÜV): 04/2027, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Equipment: ABS, Unladen weight: 8,625 kg, permissible total weight: 36,000 kg, load securing with certificate, loading space (L W H): 13,403 mm x 2,460 mm x 2,650 mm. Tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), loading volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride protection, pallet box, electronic braking system (EBS), spare wheel holder (2x), bolted chassis, swing doors, double deck for EURO pallets with beams, connecting plug 1x15 and 2x7 pin, antispray, telematics system. You can find our complete vehicle range at . Interested in financing? With our Value Added Services, we offer customized financing options, full-service and telematics solutions. We will be happy to advise you. Duodozkw Drepfx Aaysw

Condition: used, empty load weight: 7,204 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 03/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2020, Equipment: ABS, Unladen weight: 7204 kg, permissible total weight: 39000 kg, load securing system with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,900 mm, tire size: 435/50 R19.5, certificate DIN EN 12642 (code XL), cargo space volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system EBS, bolted chassis, portal doors, sliding roof, connection plug 1x15 and 2x7 pole, anti-splash, liftable roof (hydraulic), telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Djdpfozkw D Esx Aayeuw

Condition: used, empty load weight: 6,536 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 07/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2023, gearing type: mechanical, Equipment: ABS, Unladen weight: 6,536 kg, gross vehicle weight: 36,000 kg, load securing with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,780 mm. Tire size: 385/65 R22.5, DIN EN 12642 (Code XL) certificate, cargo volume: 93 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride protection, front lift axle, pallet box, electronic braking system (EBS), spare wheel holder (2x), swing doors, sliding roof, power connection plug 1x15 and 2x7 pin, spray suppression, telematics system. You can find our complete vehicle inventory at . Financing required? With our Value Added Service, we offer you individual financing solutions, full service, and telematics services. We are happy to advise you. Duedjzkw A Ijpfx Aayew

Condition: used, empty load weight: 6,623 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 385/65 R22,5, color: silver, Year of construction: 2025, gearing type: mechanical, Equipment: ABS, Unladen weight: 6623 kg, permissible total weight: 36000 kg, load securing system with certificate, cargo area (L W H): 13,620 mm x 2,480 mm x 2,950 mm, tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo area volume: 99 m³, 1st axle:, 2nd axle:, 3rd axle:, air suspension, underrun protection, electronic braking system EBS, tool box, spare wheel holder (2x), bolted chassis, portal doors, sliding tarpaulin, connector plug 1x15 and 2x7-pin, anti-spray, roof safety airbag, liftable roof (manual), telematics system. You can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Dusdpfxozkw A Uj Aayjw

Condition: used, empty load weight: 6,900 kg, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 96 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2022, Equipment: ABS, Tara: 6900kg, Peso bruto admissível: 35000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.620 mm x 2.480 mm x 2.850 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 96 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Caixa de ferramentas, Chassis aparafusado, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Telhado de elevação, Sistema de telemática, Dedpjzkwukjfx Aaysuw

Condition: used, empty load weight: 8,972 kg, maximum load weight: 30,028 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2018, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2018, Equipment: ABS, Tare weight: 8972kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dodpfezkwt Tjx Aaysuw

Condition: used, empty load weight: 7,830 kg, maximum load weight: 27,170 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2021, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2021, gearing type: mechanical, EU-approved vehicle, unladen weight: 7830 kg, permissible total weight: 35000 kg, cargo space (L W H): 13,403 mm x 2,460 mm x 2,700 mm, tire size: 385/65 R22.5, cargo space volume: 89 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, pallet box, electronic braking system (EBS), spare wheel holder (2x), ferry lashings, double-deck, connector plug 1x15 and 2x7-pin, storage box. You can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Djdpszkwqxefx Aaysuw

Condition: used, empty load weight: 7,811 kg, maximum load weight: 27,189 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2021, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2021, gearing type: mechanical, EU vehicle, unladen weight: 7811 kg, permissible total weight: 35000 kg, cargo space (L W H): 13,403 mm x 2,460 mm x 2,650 mm, tire size: 385/65 R22.5, cargo space volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, pallet box, electronic braking system (EBS), spare wheel holder (2x), ferry lashings, double-deck, connection plug 1x15 and 2x7 pole, you can find our complete vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Dsdpfx Aaszkwq Eoyjuw

Condition: used, empty load weight: 8,320 kg, maximum load weight: 26,680 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2025, gearing type: mechanical, EU-approved vehicle, unladen weight: 8320 kg, permissible total weight: 35000 kg, cargo space (L W H): 13,403 mm x 2,460 mm x 2,650 mm, tire size: 385/65 R22.5, cargo space volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, pallet box, electronic braking system (EBS), spare wheel holder (2x), ferry lashings, double-deck, connector plug 1x15 and 2x7-pole. You can find our complete vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Duedozkwq Sopfx Aayew

Condition: used, empty load weight: 7,811 kg, maximum load weight: 27,189 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, gearing type: mechanical, EU vehicle, unladen weight: 7811 kg, permissible total weight: 35000 kg, cargo space (L W H): 13,403 mm x 2,460 mm x 2,650 mm, tire size: 385/65 R22.5, cargo space volume: 87 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, pallet box, electronic braking system (EBS), spare wheel holder (2x), ferry lashings, double-deck, connection plug 1x15-pin and 2x7-pin. You can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Dujdpfxszkwrcj Aayjw