Measuring system

Mahr XR1+SD26+ST-G

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning length: 705 mm, turning diameter: 366 mm, spindle motor power: 18 W, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Djdpfsywtwwox Akcecg Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe Paper band filter Working time hours Under power: 23.501 Cutting Time: 7.494 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 700 mm, spindle motor power: 32,000 W, controller manufacturer: SIEMENS, controller model: C200-sl, number of axes: 5, This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Additional equipment • Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. • Environmental data: Noise level: 73.8 dB(A) Machine Benefits Technical Machine Benefits • Control system: based on sinumerik 840d solutionline (sl) with sinamics s120 drives. 18. 5" tft color display with pct-touch (ip65). Siemens operate user interface in german. • Interfaces: 4x usb 2. 0 (2 on the control panel, 2 in the control panel). Network-capable for nc data transfer (logical drives). • Safety: siemens safety-integrated (profisafe). • Turret mechanics: hydraulic locking, ac motor with face gearing. Drive power per tool carrier: 10 kw (25 % ed), max. 8,000 rpm. • Tool holder: cylindrical shank d25x48 (din69880) with w-slots for higher repeat accuracy. Driven tools possible in every station (only rotating in working position). • Cooling unit: 13 kw for hydraulics, spindles and control cabinet. Connection for cooling water (20°c ±2°c, 30 l/min, glycol 25 %). • Chip conveyor: hinged belt conveyor (made by knoll) with 180-liter container, discharge height 840 mm. Cooling lubricant system: 750-liter container, 8-bar/20-80-bar pumps. • Bar loader interface: unimag4-compatible (external loaders require specific cover). Maximum bar length: 1,035 mm (short bar operation). Gantry pick-up device: pneumatic gripper (Ø 10-90 mm, max. 3. 5 kg). Conveyor belt with switch for finished parts/remaining parts. Extra Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. back-up fuse: 100A Main Drive Main spindle and counter-spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110mm Torque max. (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston area pressure: 57cm² Piston area tension: 57cm² Compressive force max.: 45600 N Tensile force max.: 45600 N C-axis: Drive: Hollow shaft motor of the spindle; angle measuring system directly on the spindle Position spread (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool carrier 1 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 2 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Dcodpfx Aoyyuvtjkcsg Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 3 X-axis working path: 180mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm Dcedpfxot Hw S Is Akcsg daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Dodjv E R E Ajpfx Akcscg x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Dcjdpfsuz If Nex Akcjg Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Dcodpfsglp Nqjx Akcog Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 141447, Technical characteristics: Max. measuring range in mm X axis 500; Y axis 500; Z axis 500 Dimensions in mm Without base: length: 1160; width: 1080; height: 1803 With base: length: 1170; width: 1090; height: 2480 Mass of CMM in kg: without base: 350 with base: 445 Max admissible workpiece mass in kg: 100 Equipment consists of: Coordinate measuring machine (CMM) with base Control (integrated) Control console Software (Calipso 5.4) Documents Probing system Master stylus Reference standard Changer rack Machine status: WORKING Dsdexxvbrspfx Akcscg

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 600 mm Measuring range *X 3.200 , Y 1.600 , Z 1.800 [mm] Uncertainty of measurement *30 + L/40, max. 60 [µm] at L=3,000 mm Dynamics *3D-travel speed 220 mm/sec *3D acceleration 1000 mm/sec² Touch probe *Renishaw PHS / alternatively PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Dcedpfshlqknjx Akceg Radio control unit *Hand control HT400 Software POLYWORKS Inspector Optional technologies MCR20 stylus changing bench Stylus changing bank ACR3 Optical scanner KREON or NIKON Services of the supplier transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance

Year of construction: 2003, condition: ready for operation (used), X-travel: 2500mm, y-travel: 1000mm, z-travel: 1200mm, software: Metrosoft CM. Dcodpfxofxzyrj Akcsg

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm Dsdpfjyrb Tnsx Akcjcg - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders 1 H32 cutoff blade holder 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader