Telehandler

Magni RTH 6.25

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,000 mm, fork length: 1,200 mm, total length: 8,830 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% Lhsdpjx Avvwefx Ad Nsb - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 150 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 3000 x 1500 x 150 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: PRIMACH 30L WEIGHT: 10000 Kg Lodpfsvghb Djx Ad Nehb OVERALL DIMENSIONS: 10500 x 3400 x 2200 mm

Condition: used, power: 99 kW (134.60 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 25,000 mm, Year of construction: 2022, operating hours: 1,635 h, Technical information Lhodpfxetr Np Es Ad Nob Make of engine: Deutz Top speed: 40 km/h Empty weight: 18.000 kg Functional Lifting capacity: 6.000 kg Identification Serial number: 00005296 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Transport dimensions (LxWxH): 7.63x2.53x3.15 Additional information Please contact PFEIFER GROUP for more information

Condition: used, power: 99 kW (134.60 HP), fuel type: diesel, lifting height: 25,000 mm, Year of construction: 2022, operating hours: 974 h, Technical information Make of engine: - Top speed: 40 km/h Empty weight: 18.000 kg Functional Lifting capacity: 6.000 kg Identification Serial number: 00005517 Ljdpjtr Ihisfx Ad Nehb Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Transport dimensions (LxWxH): 7.63x2.53x3.15 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2023, Description: OREE PH-3015T6: (6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 12 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.900 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 26 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 140 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max loade 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why, CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 2 week. Not included. Cit9d2x8ou - we can offer installation cost, depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 140 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Lsdpfx Ajix N N Ied Nehb Official Dealer CNC Top Ten b.v. Denekamp Holland

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,275 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telehandler Speed class: 40 Lhsdpfx Adjumvfyj Njb Technical condition: very good

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 25,000 mm, total length: 8,680 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt Lsdpfox Szutox Ad Njhb - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Lhodow Eqdkepfx Ad Njb Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,000 mm, total length: 8,680 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 Ledpfxox I Skko Ad Nehb - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2022, operating hours: 420 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 18.000 kg Lifting capacity: 6.000 kg Rental currency: EUR Lhjdpfjxlm Icox Ad Nob Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2023, machine/vehicle number: OR-220701306, Description: OREE PH-3015: ( 6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) Lodpfoix Nn Ujx Ad Nehb - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2022, operating hours: 570 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 18.000 kg Lifting capacity: 6.000 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Lhjdsxlm Iiepfx Ad Njb

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2022, operating hours: 930 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 18.000 kg Lifting capacity: 6.000 kg Rental currency: EUR Ljdsxlm H Sjpfx Ad Nehb Please contact KEY-TEC Sales for more information

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 390 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telehandler Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Ledpfx Adoxd Ifgj Nshb Condition: As new Technical condition: Good Front tyres type: Pneumatic Front tyres size: 18 - 22 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 18 - 22 Rear tyres condition: 80 - 100% Description: Due to its 3-in-1 design (telehandler, crane, and aerial work platform), the MRT 2660 is a versatile tool for your material handling tasks. The MRT 2660 can lift up to 6 tonnes and, thanks to its pentagonal boom section and exceptional 360° visibility, provides highly precise load control. The 360° rotation allows you to perform various jobs without having to reposition the machine. It can be operated either on wheels or outriggers, providing a larger support surface for enhanced safety during operation. The MRT 2660 is intelligent, ergonomic, and comfortable, making it ideally suited for construction and industrial applications. It is a powerful and precise tool you won't want to be without! Various attachments such as a man basket, winch, or bucket are available for this telescopic forklift. Third valve, heater, full cab, air-conditioning,

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 25,000 mm, total length: 8,080 mm, - Drehbarer Teleskopstapler RTH 6.25 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 25,00 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss/Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe, Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt Lhodjxd Hngspfx Ad Neb - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 6.390 mm - Dieselkraftstoff 175 l - AdBlue 10 l - Hydrauliköl 165 l - Motoröl 9l - Kühlflüssigkeit 20l - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss/Casappa - Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss – Valvola elettroproporzionale SIL 2 - Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung , Steuerung mit CAN-Bus-Technologie