Conveyor belt converter

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 140 2814, conveyor belt width: 700 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting a bid obligates you to collect the machine on time by 22.05.2026! TECHNICAL DETAILS Band width: 60 - 700 mm Sheet thickness: 0.5 - 4 mm Feed length: 0 - 700 mm Fpodey Nkdlspfx Aaleg

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Fpjdpsfxpbmefx Aalog

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 140 256.4, conveyor belt width: 600 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting an offer obligates you to collect on time by 22.05.2026! TECHNICAL DETAILS: Band width: 600 mm, Sheet thickness: 0.5 - 4 mm, Feed length: steplessly adjustable 30 - 500 mm. Fpedpfx Aey Nkb Doaljg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Fpsdpfxsy Nkaas Aalog

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Fpededx Axfspfx Aalog Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Fpedpfx Aey Ib H Ijalog Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Fodpfjy Ib A Nsx Aalopg TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: good (used), Obel Pedersen RF feed band press Opel Pedersen press type 2412 Fedsdybr Ropfx Aalopg Press length 2500 mm width 600 mm with gluing, carriage, HF generator T20 V and water cooling System has been released.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00150, Year of construction: 2022, operating hours: 1,792 h, load capacity: 2,500 kg, empty load weight: 690 kg, total height: 1,300 mm, total length: 3,500 mm, total width: 800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: E24/55 HFX Operating hours: 1,792 h Dimensions & Weight Dimensions (L x W x H): 3,500 x 800 x 1,300 mm Unladen weight: 690 kg FEATURES Charger PIN code unlocking The following technical data is based on the manufacturer's datasheet. The seller cannot guarantee its accuracy. Load centre: 600 mm Distance from wheel axle to load carrier face: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load wheel dimensions: Ø 85 x L 85 mm Load wheel dimensions, bogies: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier face: 1,170 mm Outer fork arm width: 520 / 540 / 560 / 680 mm Ground clearance, wheelbase centre: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised/lowered: min. 2,095 / 2,165 mm Fpsdey H Dk Hspfx Aalog Performance Data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00150

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00151, Year of construction: 2022, operating hours: 1,666 h, load capacity: 2,500 kg, empty load weight: 605 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: HFX 1600/3200 Operating hours: 1,666 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,700 mm Unladen weight: 605 kg EQUIPMENT Battery charger PIN code unlocking The following technical data is taken from the manufacturer’s datasheet. The seller cannot guarantee its accuracy. Load center: 600 mm Distance from load wheel axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tires, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load side wheel dimensions: Ø 85 x L 85 mm Load side wheel dimensions, bogie: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Fpodsy H Dciepfx Aalsg Dimensions Lift: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm Outer fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00151

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake Fodpfoi Hmpiox Aaljpg tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42364L00583, Year of construction: 2022, operating hours: 2,593 h, load capacity: 2,000 kg, empty load weight: 595 kg, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,000 kg MACHINE DETAILS Charger: E 24/55 HFX Operating hours: 2,596 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,300 mm Unladen weight: 595 kg EQUIPMENT Charger Key The following technical data are taken from the manufacturer's datasheet. The seller cannot guarantee their accuracy. Load center: 600 mm Distance from drive axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogie: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in operating position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fsdpsy H Dbrofx Aaljpg Fork dimensions: 55 / 165 / 1,150 mm External fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with load / without load: 10 / 12 km/h External reference: W42364L00583

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Fodpfxjy Hki As Aaljpg Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Stroke 20 mm Fpjdpfx Aoff Apijaleg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Fpsdjy Hkhrepfx Aaljg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit