Wagner Permanent Magnetic Conveyor Belt

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, controller model: Heidenhain 530, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,270 mm Z-axis travel: 1,500 mm Spindle speed: up to 4,000 rpm Tool holder: SK50 MACHINE DETAILS Cpsdpoymcu Asfx Aa Esw Control: Heidenhain 530 Internal cooling: 22 bar EQUIPMENT Diagonal milling head with 2.5 x 2.5 indexing Longitudinal chip conveyor

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Cedpfsrn U H Hjx Aa Espw Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: ready for operation (used), Year of construction: 2009, operating hours: 27,745 h, functionality: fully functional, machine/vehicle number: NT320110134, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The offer includes a comprehensive tool package (see attachment; an Excel table can be provided on request)! An inspection checklist for 2025 is also included. TECHNICAL DETAILS Maximum workpiece swing diameter: 600 mm Cjdpfx Asyml Eqoa Eopw Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum machining diameter at tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Axes X-axis tool spindle: 685 mm Y-axis tool spindle: ±125 mm Z-axis tool spindle: 1,075 mm B-axis swivel range: ±120° X-axis turret 2: 130 mm Z-axis turret 2: 970 mm Main spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Counter spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Tool spindle (Turret 1) Maximum speed: 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating Hours Power-on hours: 131,963 h Operating hours: 68,391 h Spindle hours: 27,745 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,709 h, functionality: fully functional, machine/vehicle number: NT320GE0052, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The machine's tool spindle was replaced in 2022! The offer includes a comprehensive tooling package (see attachment; an Excel tool list can be provided upon request)! TECHNICAL DETAILS Maximum workpiece swing diameter: 600 mm Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum turning diameter with tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Travel paths X-axis (tool spindle): 685 mm Y-axis (tool spindle): ±125 mm Z-axis (tool spindle): 1,075 mm B-axis (swivel range): ±120° Cedpfsymlvvex Aa Ejpw X-axis (turret 2): 130 mm Z-axis (turret 2): 970 mm Main spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Counter spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Milling spindle (turret 1) Speed: max. 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating hours Power-on hours: 138,593 h Operating hours: 66,865 h Spindle hours: 29,709 h

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Cpsdpfx Aaevpvp Io Eow

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, paper width (min.): 130 mm, paper width (max.): 780 mm, paper height (min.): 6 mm, paper height (max.): 1 mm, production capacity: 8,000 unit/h, Machine in nearly new condition with only 50 operating hours! TECHNICAL DETAILS Maximum paper size: 950 x 780 mm Minimum paper size: 150 x 130 mm Maximum window size: 380 x 300 mm Minimum window size: 50 x 50 mm Paper thickness: 1 - 6 mm Speed: 8,000 pcs/h MACHINE DETAILS Input voltage: 380 V Operating hours: 50h Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,750 x 1,700 mm Total weight: 3,200 kg Cedpfxeyl U A Aj Aa Espw FEATURES Processing of standard and corner windows Precise positioning with automatic centering system High degree of automation User-friendly control with touchscreen Robust construction

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 2,000 mm, spindle speed (max.): 1,000 rpm, travel distance Z-axis: 2,000 mm, overall weight: 40,000 kg, turning diameter over bed slide: 1,270 mm, controller model: Fanuc Serie 18i-TB, TECHNICAL DETAILS Turning length: 2,000 mm Swing diameter over bed: 1,550 mm Swing diameter over cross slide: 1,270 mm Spindle speed: 1,000 rpm Spindle diameter at front bearing: 240 mm Spindle bore: 185 mm Spindle power: 37/30 kW Bar capacity: 165 mm Travel in longitudinal direction (Z-axis): 2,000 mm Cross travel: 685 mm Rapid traverse speed X-axis: 10 m/min Rapid traverse speed Z-axis: 12 m/min Cpodpjylwl Tefx Aa Ejw MACHINE DETAILS CNC control: Fanuc Series 18i-TB Dimensions & Weight Dimensions (L x W x H): 9,800 x 3,695 x 5,292 mm Machine weight: approx. 40 t EQUIPMENT 12-position turret

Condition: used, Year of construction: 2019, Sennebogen 835 M-HDS Series E - Tier 4 / EPA Year of manufacture: 2019 Cummins engine - EPA - Tier 4 / Stage V, 231 kW MP34 HDS mobile undercarriage Drive control via single accelerator pedal Solid rubber tyres 16.00-25 (4-piece) Joystick steering Additional counterweight, 0.8 tonnes Cab adjustment: E270 Maxcab Maxcab Industry with front and roof windscreen Comfort operator's seat, air-suspended Safety belt, 2-inch Front guard for windscreen, Maxcab Industry Sun blind for roof window, Maxcab Industry cab Sun blind for windscreen, Maxcab Industry cab Radio with USB, SD, MP3, Bluetooth Catwalk on cabin side, with bolted railing Railing on upper carriage (Boxing ring) Sennebogen Hydro-Clean filter for hydraulic oil K18 working equipment – 10.1 m + 7.9 m (59’) 20 kW generator 1 LED work light on the cab roof (rear-facing) 2 LED headlights on the stick (1 left, 1 right) 1 LED light on the lower boom Cedpfjxu U Eujx Aa Eepw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2338, travel distance X-axis: 6,700 mm, travel distance Y-axis: 2,090 mm, travel distance Z-axis: 70 mm, table width: 2,160 mm, table height: 915 mm, table length: 7,340 mm, TECHNICAL DETAILS X-axis travel: 6,700 mm Y-axis travel: 2,090 mm Z-axis travel: 70 mm Main drive: 1 x HSD Main drive power: 6.6 kW / 8.9 HP Max. main spindle speed: 24,000 rpm Secondary drives: 2 x ELTE Cpedpfx Aaeylk Hde Eew Secondary drive power: 3.7 kW / 5 HP Max. secondary spindle speed: 24,000 rpm Table width: 2,160 mm Table length: 7,340 mm Table height: 915 mm Number of milling heads: 3 EQUIPMENT Vacuum pump: BUSCH MINK Manuals Integrated software

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer was €486,000 (net)! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly duty cycle: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 g/m² up to 350 g/m² Paper weight range (validated): up to 400 g/m² Duplex printing media weight: 350 g/m² MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Main unit dimensions C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like quality Supports specialty and textured media In-line sensors for color management Automatic calibration Csdpeymwzdefx Aa Espw

Year of construction: 2018, condition: new, Permanent overband magnetic separator Codpfxed Dy S Ds Aa Ejpw TYPE PEM2200 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7F001-7, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No reserve price – guaranteed sale to the highest bidder! According to the manufacturer, the year of manufacture is likely 2015. TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Maximum traverse speed X, Y, Z-axis: 160 mm/s Measuring accuracy of optical sensor X, Y-axis: Ex, Ey = (1.6 + L/250) µm Measuring accuracy of optical sensor XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy of optical sensor Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy of touch-trigger probe X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy of touch-trigger probe XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy of touch-trigger probe Z-axis: Ez = (2.9 + L/200) µm Measuring volume, optical sensor X: 300 mm Measuring volume, optical sensor Y: 200 mm Measuring volume, optical sensor Z: 150 mm Cpjdeyl U S Djpfx Aa Esw Measuring volume, tactile sensor X: 230 mm Measuring volume, tactile sensor Y: 200 mm Measuring volume, tactile sensor Z: 150 mm MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC motorized Dimensions & Weight Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including PC-DMIS Vision measuring software Documentation / manuals Workpiece clamps / stops for securing the items to be measured Various probes included Probe change rack for storing 4 probes

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Codpfx Ajyl U Nvea Eopw Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm Cpodpoyi Ht Ijfx Aa Eow Capacity ca. 3.000 - 5.000 kg/h Number of press rollers 2 Münch RMP 660 pellet press for producing wood pellets and biomass pellets from sawdust, wood chips, and other organic waste materials. The machine is suitable for industrial pellet production with high pressing performance and consistent pellet quality. Ideal for wood processors, sawmills, and biomass companies.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,513 h, machine/vehicle number: 31662, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS Cpodpfx Ajylwg Dsa Ejw CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Wila hydraulic upper and lower clamping