Field cable cable telephone cable new

Condition: used, machine/vehicle number: 91132839, Year of construction: 2018, operating hours: 9,548 h, No reserve price – guaranteed sale to the highest bidder! Note: The forklift was inspected after relocation. As the necessary transponders are missing, a complete inspection could not be performed. The following defects are known: - Seat locking lever broken off - Switch on steering wheel defective - Left side cover deformed - Access module damaged – button defective - Transponders missing The forklift has already been dismantled for transport. MACHINE DETAILS Iiedpfx Aoy Nzl Tjg Isb Operating hours: 9,548 h The following technical data is taken from a manufacturer’s data sheet (attached). The seller cannot guarantee its accuracy: TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 401 mm Load distance, mast extended: 215 mm Wheelbase: 1,410 mm MACHINE DETAILS Total weight: 3,438 kg Axle load without load front/rear: 2,292 / 1,146 kg Axle load with load, forks forward front/rear: 902 / 4,132 kg Axle load with load, forks back front/rear: 2,024 / 3,014 kg Tyres: PU Tyre size front: Ø 343 x 114 mm Tyre size rear: Ø 285 x 100 mm Wheels, front/rear: 1x / 2 Rear track width: 1,168 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Iiedsy I Tvnopfx Ag Iob Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 06/06/2026! TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm Iisdpfxsy Rl Ale Ag Isb MACHINE DETAILS Control: Fanuc 15 M Rotary axis: Fibro NC1

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected while powered on until May 4, 2026! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously maintained by Trumpf and has a complete service record. The cylinders are sealed and have no oil leaks. The tools shown for the robot are included. TECHNICAL DETAILS Iisdpsy Hqc Njfx Ag Ieb Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam operating time: 15,396 h Hydraulic operating time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning BendMaster (Robot with 8 m travel path) Vacuum manipulators CNC gripping station Double sheet detection BendGuard LaserSafe safety device Spare parts: Cable track, spare vacuum plate, BWF fixators (machine feet)

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, laser power: 6,000 W, laser source model: TruFlow 6000, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Isdpfxoy Hqaho Ag Ijib Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connected load: 114 kVA Mains connection: 400 V Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 – 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Isdpfx Asy Nmxxog Ijib Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, No reserve price – guaranteed sale to the highest bidder! The machine was last overhauled in 2024! TECHNICAL SPECIFICATIONS Material loading area: 4,000 mm x 2,000 mm Iijdsy Nkzqjpfx Ag Ijb MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history dating back to 2019

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Iedpoy Hk Nijfx Ag Ijib Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Isdjy Hk E Rjpfx Ag Ioib Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Iijdsy Nc Rwspfx Ag Iob Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)