High rack

Hochregal

Condition: used, clear span: 1,860 mm, total width: 11,720 mm, total height: 2,500 mm, Technical Data for Pallet Racking System: Racking System: Alser Type: NS Setup Specifications: Number of rack rows: 01 pcs Length per rack row: approx. 11,720 mm Number of bays per rack row: 06 pcs of 1,860 mm each Number of levels plus ground level: 02 pcs Volume Specifications: Pallet locations per bay: 06 pcs Pallet locations per row: 36 pcs Total pallet locations: 36 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: approx. 1,000 kg Scope of delivery includes: 07x pallet racking uprights, used Material color: brown Profile dimension: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled Ppsdpsx Upqbofx Aaljl Max. bay load: 4,000 kg At buckle height: 1,250 mm (min. 5 bays per row) (welded truss) 2,500 mm high 1,050 mm deep 24x pallet racking beams, used Material color: orange Profile dimension: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear width: 1,860 mm Max. load per pair of beams: 2,000 kg, with evenly distributed load 48x safety pins, used Material finish: sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Material: sendzimir galvanized To level uprights set up on uneven ground 01x load plate with information on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any transportation or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and order volume.

Condition: new, Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Pjded R Uz Tepfx Aalepl Dimensions sheet 2700 x 27 x 0.9

Condition: used, total height: 4,050 mm, load per truss pair (max.): 3,000 kg, shelf length: 67,300 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 67,300 mm Number of bays per rack row: 24 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 216 pcs. Total pallet spaces: 216 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Ppedpfjr Epl Ssx Aalel Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 25x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 96x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 192x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 100x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 50x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, total height: 4,050 mm, load per truss pair (max.): 3,000 kg, shelf length: 16,900 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 16,900 mm Number of bays per rack row: 06 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 54 pcs. Total pallet spaces: 54 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 48x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors Pedpfx Ajr Epmdsalepl 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, number 70 Positionen weight 90 kg condition neu 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 Ppsdswth N Topfx Aalsl 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 1x Set of Stop and Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Ppsdpotyyr Sofx Aalsl Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, clear span: 1,800 mm, total width: 1,050 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 11,430 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,430 mm Number of bays per row of shelves: 06 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 07x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg Ppedpfxstznl Is Aalol 216x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Ppjdpfjwbh Ifex Aaljl Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, mileage: 245,000 km, power: 353 kW (479.95 HP), first registration: 06/2007, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro4, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, two-way tipper, trailer hitch, 10,350 operating hours Suspension: Leaf suspension Ppsdpfjx Dzrtjx Aalsl

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Pjdpowhp N Dsfx Aaljpl