Heidelberg Finishing

Heidelberg Stahlfolder Gate fold Attachment for KH78- 2018

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) Ledpfxjxmhflj Af Sort - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 Lsdpox Hbkdofx Af Ssrt – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Ljdsxtau Espfx Af Sort Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Lodpfx Ajwcqw Sof Sert Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: good (used), Year of construction: 1990, Built in 1990 Size: max 460 x 305 x 60 mm min 140 x 103 x 2 mm Book block thickness: max 60 mm min 2 mm Cover size: max 470 x 655 mm min 140 x 210 mm Speed: max 7.000 c/h Equipment gathering machine: Ledpjgmr N Tsfx Af Sort gatherer ZTM 370 x 20 missing sheet and double sheet control criss-cross delivery perfect binder: 26 clamps milling station spine preparation station dust extraction fume extraction hotmelt spine gluing unit 2nd hotmelt spine gluing unit hotmelt side gluing unit stream cover feeder 2. cover pressing station lay down device standards: 1 set of operator manuals 1 set of electrical diagrams 1 set of standard tools

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Lrsdpoytawnsfx Af Sot Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 631 / 169 / 4,3 562 / 697 632 / 697 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Ledjwvtqnspfx Af Sjrt Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: ready for operation (used), Type ACC 2.4 Lsdpfx Afod H Ncpo Sort

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Size: 700 x 500 mm Speed: 4.000 c/h Lrjdodyk Rpepfx Af Sjt Equipment: • hand fed station • 15 stations

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Ljdpfxedf S Eye Af Sert We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!