Low loader semitrailer

Gabelstapler/Arbeitsbühnentransporter Klapprampe

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Hedpev Rpf Ssfx Adajh Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: new, axle configuration: 3 axles, Year of construction: 2025, GVN Trailer 3 Axle Exclusive Lowbed    Please get contact with us for more informaiton;   Hedpfx Adeqxbcnjaeh

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, new ceylan trailer to be registered , 3 axles with 1st liftable and 3§°steerable, ebs, double full-side electro hydraulic ramps, wideners, winch predisposition, lower part height 87cm, length 9.95m, total 13.65, rud hooks, immediate delivery except sold-warranty-CONCESSIONARY INTERDRIVE SRL-PARMA Hodpoh S Aw Refx Adajh

Condition: new, axle configuration: 3 axles, Year of construction: 2026, We have all Europe documents!      We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      Hodpfjqx Nfgox Adajh If you have an interest please contact with us 

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Hsdpfoqvnmfjx Adaoh

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT Hedewzmcbopfx Adaoh These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 1983, 4 x complete spray booth with drying oven for buses. Hedpfx Adewrpwvjash Completely operational with all walls/constructions and engines/burners

Condition: used, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm Hjdpfx Adeud Ttnsaoh total power requirement / kW weight of the machine ca. / t required space / m Table dimensions: 800x800mm Height: 590mm

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 275-800 workpiece height max.: 1.040 mm horizontal adjustment of the boring slide: 180 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 1.040 max -350 min mm spindle taper MT: MK 4 range of revolutions per minute - continous: 63 - 1.600 / 8 step U/min swivel range of the arm: 360 Grad feed: 0,125/0,200/0,315 mm/U column diameter: 180 mm base plate surface area: 730 x 500 mm weight of the machine ca.: 1,2 t dimension machine xH: 1,75x0,56x1,97 m Cooling water system with pump and supply to the spindle * Hodpfewa Rzljx Adash

Condition: new, maximum load weight: 28,500 kg, overall weight: 38,500 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 2025, Equipment: ABS, Neuer Anhänger für den Transport oder alle Arten von Fahrzeugen oder anderem Material. Dieser Anhänger kann hinten um 1,5 Meter verlängert werden Der letzte Teil kann hydraulisch heruntergefahren werden und es gibt zwei kurze Aluminiumrampen. Dieser Boden kann hydraulisch vom Ladeboden bis zum Hals angehoben werden Vor dem Anhänger ist eine hydraulische Winde montiert, die über eine Fernbedienung bedient wird Kopfschuss kann in verschiedenen Höhen bestellent werden The anchor is fully galvanized BPW axles and brakes and complete Wabco air control system installed Hodpfx Adov Nx Ndoaoh Equipped with longitudinal gear on the first axle Die Reifenmontage ist Hankook 215 / 75R17.5 Doppelmontage Spare part enthalten und unter dem Anhänger montiert Schwere DIN-Augen zum Anschließen von Ketten zur Sicherung des Materials Edge bars with runden Löchern zum Einhaken in Zurrgurte Sehr starker Boden aus Holz und Stahl und ein Anhänger mit Rong-Töpfen Plates also fully galvanized and orderly in the box aufbewahrt Viele Kisten sind für Fehlerbefestigungen montiert Vorne im Nacken zwei abnehmbare Bodenstücke mit abnehmbaren Platten, auf denen Sie die Vorderräder eines Fahrzeugs platzieren können, um die Ladehöhe zu begrenzen Dieser multifunktionale Anhänger ist auf Lager, kann aber auch mit einer Lieferzeit von 3 Monaten bestellt werden Wenn Sie interessiert sind oder Fragen haben, können Sie jederzeit unser Twente Trucks Team anrufen New trailer for transport of all types of vehicles or other material. This trailer can be extended by 1.5 meters at the rear The last part can fold down hydraulically and there are two short aluminum ramps. This floor can be raised hydraulically from the loading floor to the neck In the front of the trailer is a hydraulic winch mounted that is operated by a remote control Headboard can be ordered in various heights The trailer is fully galvanized BPW axles and brakes and complete Wabco air control installed Equipped with trailing axle on the first axle Tire mounting is Hankook 215 / 75R17.5 double mounting Spare wheel included and mounted under the trailer Heavy DIN eyes for hooking up chains to secure material Edge beams with round holes for hooking in lashing straps Very strong floor made of wood and steel and a trailer with rong pots Stakes also fully galvanized and neatly stored in the box Many crates mounted for storing fasteners in the front of the neck two pieces of floor with plates that are removable where you can put the front wheels of a vehicle to limit the loading height This multifunctional trailer is in stock but can also be ordered with a delivery time of 3 months If you are interested or have any questions, you can always call our Twente Trucks Team New trailer for transport of all types of vehicles or other material. This trailer is 1.5 meters extendable at the rear. last part can be hydraulically folded down and there are two short aluminum ramps. From the loading floor to the neck, this floor can be raised hydraulically. In front of the trailer is a hydraulic winch mounted which is operated by a remote control. Headboard can be ordered in different heights The trailer is fully galvanized Axles BPW and brakes and complete air control Wabco mounted Equipped with traction axle on the first axle Tire mounting is Hankook 215/75R17.5 double mounting Spare wheel included and mounted under the trailer Heavy DIN eyes to hook on chains to secure material Side beams with