Tanker truck
- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 8m - Preis je nach Größe

Fixed price plus VAT

€3,900

Condition

New

Location

Bovenden

Tanker truck - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 8m - Preis je nach Größe

- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 8m - Preis je nach Größe

Machine data

Machine type:: Tanker truck

Model:: - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 8m - Preis je nach Größe

Condition:: new

Price & Location

Fixed price plus VAT

€3,900

Seller location:: Alte Bundesstraße 48, 37120 Bovenden, Germany

Call

Technical details

Driver cabin:: other

Gearing type:: other

Details about the offer

Listing ID:: A8271326

Reference number:: 2907

Update:: 17.10.2025

Description

Vehicle location: in transit / arriving soon,
Iisdpfx Agei Rqr Tj Ijb

Superstructure: Self-priming water pump, self-lubricating, equipped with a separate engine. Dirty water pump with KD350 C5 engine, air-cooled, max. delivery rate 1,800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming. Impeller made of graphite cast iron, volute made of graphite, mechanical seal made of silicon carbide. Centrifugal pump designed for dewatering and drainage, suitable for handling highly contaminated media with particle sizes up to 20 mm. Standard equipment includes strainer, screw fittings, clamps, operation and maintenance manual. Weight: 90 kg.

Technical data:
- Max. delivery rate: 1,800 l/min (108 m³/h)
- Max. suction head (m): 8
- Inlet diameter (mm): 100
- Outlet diameter (mm): 100
- Particle size (mm): 20
- Self-priming: yes
- Approx. weight (kg): 90
- Dimensions (L x W x H in mm): 715 x 570 x 590
- Engine type: 1-cylinder, 4-stroke, side valve
- Engine: KOHLER KD350 C5
- Autonomy (h): 4.3
- Fuel: Diesel
- Tank capacity (liters): 4.3
- Starting system: Recoil starter

Price depends on size! Suitable water tanks: see-6112-, -6113-
ACCESSORY DETAILS WITHOUT WARRANTY. Subject to change, prior sale, and errors excepted!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2002

2,414 listings online

Call

Send inquiry

Telephone & Fax

+49 551 8... show

Fax:

Add to watchlist

Share Report listing

These listings may also fit your interest.

Listing

Pillar Drilling Machine GILLARDON GB 30 V

Niederlangen

18,411 km

Pillar Drilling Machine
GILLARDONGB 30 V

Call

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light Iiedpfxovuz T No Ag Ijb - Drill chuck

See details

Listing

MIG-MAG gas-shielded arc welder FRONIUS T.I.M.E Synergic 450

Rödermark

18,557 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Iedpsvncubefx Ag Ijib Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

Rödermark

18,557 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable Isdpfevncfmex Ag Ieib - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

Bocholt

18,527 km

Welding machine
BoehlerTerra NX 400

Call

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc Iedpfx Aow Rm Sajg Ioib IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

See details

Listing

E-welding device, stick electrode welding machine, electric welding power source ESAB LTG 250

Hessisch Lichtenau

18,422 km

E-welding device, stick electrode welding machine, electric welding power source
ESABLTG 250

€380

Fixed price plus VAT

Call

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. Ijdpfx Agjd N E Rvj Ioib The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

See details

Listing

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes DALEX GL/W 201

Hessisch Lichtenau

18,422 km

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes
DALEXGL/W 201

€750

Fixed price plus VAT

Call

Condition: used, TIG Welding Machine DALEX Type GL/W 201 TIG Welding Unit Machine No.: 201 Year of manufacture: approx. 1995 Power output: 200 Amp at 35% duty cycle 160 Amp at 60% duty cycle 120 Amp at 100% duty cycle Adjustable range: stepless Current type: DC – Direct Current Mains connection: 400 Volt, 50 Hz, 5.9 kVA, 32 Amp plug - 2-stroke and 4-stroke welding function - 8-meter TIG torch package - HF ignition - Shielding gas pressure regulator - MMA welding for stick electrodes - Fan cooling - Socket for foot pedal (foot pedal not included) Space required (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test shows very good results when welding stainless steel with DC. Overall in very good condition. Iiedpji E Izvofx Ag Isb

See details

Listing

Rödermark

18,557 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED Iodevnb Tpepfx Ag Ioib - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

Eilenburg

18,239 km

Flatbed truck
STEYR12 M18/4x4 Pritsche

€19,840

Fixed price VAT not applicable

Call

Condition: used, mileage: 158,032 km, power: 130 kW (176.75 HP), first registration: 04/1987, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 2 axles, color: brown, gearing type: mechanical, Equipment: all wheel drive, Subject to errors and prior sale! Internal number: 0633. 2MY2407 Iedpfoh Udydex Ag Ioib --- EQUIPMENT Frame for tarpaulin Flatbed All-wheel drive ... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

See details

Listing