Stacker

MÜLLER MARTINI Avanti 377

Condition: good (used), Year of construction: 2004, Built in 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 4 pages Maximum: 144 pages Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Hedpezub Uvjfx Andenr Machine Weight: 4,100 kg (9,000 lb)

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN Hnsdpey N Sqmofx Ander • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: good (used), Year of construction: 1997, Year of construction: 1997 Format: max 480 x 320 mm; min 200 x 110 mm Hsdpfxeq Tch Ao Andonr mech. speed: 1.0 m/s Air requirement (at 6 bar): 5 m³/h Net weight: 4,100 kg (approx.) Equipment - Delivery right

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Hodpfxjy D Ht Se Andonr Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Hnedpfx Ashd Na Uendor Mixer size: 3 m³ Cement silos: 2 x 55 tons Guarantee: 1 year from startup More machines and mixing plants on our website Further information: Intended use: Construction industry Usable material: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device Hnedpfxsmn Sk No Ander · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: excellent (used), A-4200-Tebel Cheese Vat Hnedpfx Ansh A Hb Usdsr Cheese Vat, capacity 10.000 L, Alfa Laval - Tebel , Good condition, 1 piece, closed Type with agitator, double jacket, Insulated. Heating jacket on lower half of cylindrical section • Cylinder length: 1.750 mm • Cylinder diameter: 2.860 mm • Internal lighting • Manhole with sliding door on top position • CIP connection • Outflow: 4" Outflow height: 400 mm Minimum level Weight 2.800 kg (L x W x H): 3.350x3.000x3.200 mm

Year of construction: 1999, condition: good (used), Built in: 1999 Capacity (A4 stacks packaged): max 20 - 24 Pakete/min Capacity ( A4 stacks loose): max 16 - 20 Pakete/min Pallet height (incl. pallet): max 1.600 mm Pallet size : max 1.200 - 1.200 mm Size: max 420 x 307 x 320 mm Size: 148 x 110 x 50 mm Equipment: • infeed and buffer section • turntable • infeed table Hnedpsdym Srsfx Ander • automatic palletizer • roller track for full pallets • intermediate cardboard slip sheet hopper • pallet dispenser

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder Hsdjylypujpfx Andenr • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hedpfx Ansrffm Njdenr