GMD20 Lowara 2-pump booster pump

Lowara GMD20

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Njdpjppyhtjfx Ad Aswp Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2025, condition: new, functionality: fully functional, Pastry Freezer stainless steel version Nodpfx Adsn D Dq Ho Ajwp for 20 trays 600 x 800 Digital temperature display from -10 to - 22°C Energy saving system EHT Freezer ready to plug in with 20 pairs of support rails Freezer with refrigerant R 290/656R A Connection 230V/650Watt Dimensions: 800 x 980 x 2060 mm, WxDxH with guarantee Visit our large bakery machine park!

Condition: new, press capacity 60 kN oil volume 60 ml 5 - 40 Grad C weight 7 kg range L-W-H 430 x 350 x 100 mm Pneumatic impact wrench set 1/2 " 10 pcs. Nuts in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc. 1/2 "extension rod 1 pc. 4 mm Allen key Nedpju Imkkefx Ad Aowp In the storage case

Year of construction: 2005, condition: good (used), machine/vehicle number: A5.01077.0181, Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Working pressure: 650 bar Delivery rate: 45 l/min. Drive speed: 1500 rpm. Driving power: 54 kW with SIEMENS electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.400x720x1.160 mm weight: approx. 800 kg Year of manufacture: 2005 Nwodpoix I Ndofx Ad Asp Condition: In good used condition.

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Nwsdpfx Adjhtnnij Ajp Year of manufacture: 1996 Condition: in good used condition.

Condition: new, feed pressure 13 bar Effective free air delivery 690 L/min Receiver capacity 270l / 16bar l / bar weight of the machine ca. 199 kg. motor 400V / 5,5KW V / KW Nedofgygxspfx Ad Aowp range L-W-H 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Nsdpfx Adordvhhe Aewp Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady Nwedpow Sm U Dsfx Ad Aop - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Njdpfx Adonq Di To Aewp All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Condition: used, Pillar drilling machines Nsdpfx Aob N Ezred Aswp