Steam boiler

Loos U-HD 1250 kg/h x 13 bar

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Hnodpfx Ajt E Rntofhok Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Hedpfxsxdc Uvj Afhenk

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Hnedpfxeftdv Ue Afhok Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: excellent (used), power: 1,700 kW (2,311.35 HP), The following LOOS brand steam boilers are the subject of the offer: LOOS U-ND 350 steam boiler Specification: - working pressure 1 bar - boiler control cabinet - oil burner - feed pump Steam boiler LOOS U-HD 800 Specification: - working pressure 10 bar - boiler control cabinet - Weishaupt gas-oil burner - Grundfos CR feed pump - safety valve - feed water tank - chemical inhibitor tank with dosing pump Loos U-HD 1250 steam boiler Specification : - working pressure 16 bar - control cabinet Hnsdsuhm Erjpfx Afhek - Weishaupt gas-oil burner - Grundfos feed pump

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Hnsdpjg Npiwsfx Afhek Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. Hsdpfowp Rqfjx Afhjnk SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Hnedotu T I Ujpfx Afhek Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: good (used), Riello oil burner 482M1,power 2370Kw,220kg/h Hsdpfepir Ryex Afhonk

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Hodpfjn D Hm Ssx Afhenk L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: used, Pillar drilling machines Hnodpeb N Ezrefx Afhek