Hammer mill

LITech HM 400

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Brewhouse Kedpswiu Twsfx Affenf Stainless steel lauter tun with copper cladding, 1800 liters. Stainless steel mash tun with copper cladding, 1800 liters. Steam generator, stainless steel, 800 liters. Hot water tank, stainless steel, 3600 liters. Leach tank, stainless steel, 397 liters. Stainless steel tank, stainless steel, 1900 liters. Plate heat exchanger: M9 NBN Plate heat exchanger: SIGMA M13 NAL SIEMENS control system 5 centrifugal pumps Storage Total volume: approx. 48,000 liters. 3 x horizontal stainless steel tanks, identical, 1600 liters each, on a frame with casters. 3 x vertical stainless steel tanks, identical, 1600 liters each. 1 x vertical stainless steel tank, stainless steel, 2100 liters. 11 x stainless steel tanks V2A vertical, identical, 2000 lt each. 4 x V2A horizontal stainless steel tanks, on a frame, identical, 1000 lt each. 5 x V2A vertical stainless steel tanks, identical, 1690 lt each.

Condition: new, NEW UNLOADER BOX, Length 4200 outside, width 2280 outside, tailboard height 600, with flagged rear tailboard, 4 mm. platform, with aluminum TR30 split tailboards Kjdpjrwl Nvjfx Affsnf

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Knodpfjn Arm Tsx Affjf Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: new, Year of construction: 2018, functionality: fully functional, Hello Kedpfxslc Euko Affenf we offer here a brand new climate outdoor unit from Toshiba. The device was built in 2018 but was never installed. The device has 45kW.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. Kedpfx Afof Nku Rjfsnf On the last three photos you can see plants of this design in operation.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Knsdpfxoua D Als Affof Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with 6,8kW. Three-phase generator Proton 3 with very low combustion. An added convenience is remote control with remote control. In short, a reliable engine, copper alternator and plugs. Model, with us since the beginning of the company. Generator perfect for construction sites. ABBREVIATION: Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Knsdotrmc Repfx Affef Voltage: 400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) WEIGHT: Gross weight: 143kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-400 Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Year of construction: 2024, condition: new, The JC 500 jaw crusher is ideal for crushing hard, brittle, hard-tough samples such as ceramics, clinker, coke, building materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slag and much more. Knsdpoiamq Hjfx Affsf

Condition: like new (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 54985, power: 19,600 kW (26,648.55 HP), Steam boiler LOOS 19.6 MW, 2x burner WEISHAUPT WKG70/3A (1,400-12,000 kW) Ksdev Hxmkopfx Affjnf Boiler operating hours: 1627 Steam boiler LOOS 19.6 MW, 2x burner WEISHAUPT WKG70/3A (1,400-12,000 kW) Boiler operating hours: 1627

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Kjdpsic Rl Djfx Affjnf Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.