Filling Machine

KRONES Mecafill VK2V 055-103

Condition: excellent (used), Year of construction: 2012, Brand: AERMEC Model: NS2352X Cooling Capacity: 500 kW/h Cooling Capacity: 430,000 Kcal/h Evaporator: Shell & Tube Condenser: Aluminum Fin – Copper Tube Fan Type: Axial Number of Fans: 8 Units Compressor Brand: Bitzer Compressor Model: CSH8563-90Y-40P Hedpjl Dqtwjfx Adaoh Number of Compressors: 2 Units Control System: Carel Dimensions (W × L × H): 2200 × 4800 × 2600 mm Weight: 3224 kg

Condition: excellent (used), Kaeser Omega 83 P blower stage, fully refurbished, 12-month warranty, HB 1300 Hodpfencd Apsx Adajh

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Hedpfx Adoiuznueaoh Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Hjdeh Eulgepfx Adajh

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. Hsdpfx Ascx R Ddodaoh 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature).

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Hodpfx Adsimz Uajash Ambient Temperature (min.): 12.8°C (based on part load performance) Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm Hodpohzbipjfx Adaoh - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Hodpfx Adov Abm Eeaoh Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: used, Year of construction: 2016, Overview  This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition and shows only minor wear. The system is still installed and connected and can therefore be viewed in person at any time. Technical details Output: 60 bags/minute Doypack/flat bag formats: 20/25g, 50g, 300g, 500g, 750g Possibility of micro-dosing powders Modern wide zipper/belt Scope of delivery  Doypack packaging machine | Volpak | SI-280 F1 Multi-head weigher | Ishida | CCW-RV-228-S/05-SS 4 raw material unloading stations Lindor mixer Cox & Plant feeder between the unloading stations and the mixer and multihead weigher Ishida X-ray unit with recoil, IX-GA-4075 Ishida dynamic check weigher with DACS-G-S0 recoil Installation for the injection of nitrogen or another inert gas, together with a measuring system Dust extraction system Euro slot Smooth welding system Hsdpetz H T Dsfx Adaeh

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Hodsrk Na Ajpfx Adaoh Year: 2004 Working pressure: 3 bar Volume: 12000 L We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. We will be glad to answer your questions via phone and e-mail