Jib crane

Konecranes

Condition: used, Single-girder crane bridge with hoist DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width of 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer rubbers, 60 mm each) Hoist DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Reeving: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main lifting speed: 5.0 m/min Fine lifting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1200 mm Itodpfxjzd Urte Abfeh Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Mains connection: 400 volts, 50 Hz - Control panel suspended from the cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Transport footprint (crane bridge only) L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Year of construction: 2009, condition: good (used), Crane/lifting beam/-traverse - Konecranes - Year of construction: 2009 Iedpem Tm H Hofx Abfeth Very good used condition. The inspection can take place at the factory by appointment. Description: - Load capacity: 300 tons - Range / distance of the attachment points: 15.500 mm - Net weight: 23 tons - Load double hook no.63 The lifting process is carried out with 2 cranes, which have a lifting capacity of of 230 and 100 t. The total load of 322 t is achieved by lifting ratio 4.7/10.8 R1 = 322*4.7/15.5 = 98 tons and R2 = 322-98 = 224 tons to the cranes according to the load capacity. Construction drawings available. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Itjdpfx Absu Dzq Rofjh Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: used, Year of construction: 2009, Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters Iedjzdf Dbjpfx Abfoth

Condition: excellent (used), Portal crane from cleanroom production / medical technology For sale: a portal crane from a cleanroom production facility in the medical technology sector. The original purchase price was approximately €54,000. Itjdpfjzdc Azox Abfjh The loading of the crane onto your four 12-ton trucks is included in the price.

Condition: good (used), Year of construction: 2009, Column-slewing crane, steel / Konecranes, 250kg, outreach 4.09m – used: Price (column with jib only) ex-works: €1,750.00 (net)! Itsdozbyfhepfx Abfeh Manufacturer: Stahl / Konecranes Type: AS2.5-4.5 Year of manufacture: 03/2009 Factory number: PO10062432 Load capacity: 250kg Outreach: 4.09m Vertical pin distance: 850mm Approval No. 920309/01 Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, total length: 18,000 mm, load capacity: 60,000 kg, Very nice overhead crane. More pictures can be sent upon request. Located in Arvika, Sweden. Shipping is possible. Iodjzbx Etspfx Abfeth

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. Itjdpfx Aboy T Ed Iofjh The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Iodoy T Eb Topfx Abfeth Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: used, Electric chain hoist, crane, hoisting unit KONECRANES type XN 20 1608 B2 Serial no.: 1016304318 Year of manufacture: 2010 Lifting capacity: 1600 kg Hook travel: 9 metres Main lifting speed: approx. 8 m/min Fine lifting speed: approx. 2 m/min Chain size: 11.3 x 31 DAT Itjdpfjw Nklnex Abfjh Main hoist motor power: 3.5 kW Fine hoist motor power: 0.86 kW Power supply: 400 V, 50 Hz - 1 load strand