Knopp double-sided glass drilling machine

Knopp Bohrfix

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Width: 1850 mm Height: 1800 mm Blodpfx Asw Sdwijb Tsr Depth: 1200 mm

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Bsdpfx Aerg E Hcsb Telr Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Condition: used, Year of construction: 2016, 8 spindle system. Connected loads: 380/400 V, 19 kW. Glass thickness: 3 - 25 mm. The system produces a beautiful glass finish. Condition: in very good condition. Blsdsv Rbtuspfx Ab Ter

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F Edge Banding Machine with Jointing, Corner Copying, and Two Scrapers. Very well-maintained machine from a small business in excellent condition. Bljdpfx Abotpn Etj Ter Touch-screen interface with PLC control for easy machine operation; up to 12 operating programs can be stored. Edge thickness (coil): approx. 0.4 - 3 mm Workpiece height: approx. 8 - 53 mm Feed speed: approx. 10 m/min Sound insulation hood Extendable workpiece support (special equipment), extendable by up to 950 mm Extraction ports: 80 + 140 mm Units: - Quick-change glue pot with glue outlet; two glue pots included (one used for EVA glue and one for PU glue – the PU glue pot is practically as new, purchased for a single job) - Manual upper pressure adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with Leitz Whispercut diamond cutters, still sharp - Gluing section with automatic edge feed for coil material up to 3 mm - Pressure zone with 4 rollers - End trimming saw - Integrated chip container for edge trimmings - Combination milling unit, R2, with pneumatic changeover between thin and thick edge - Corner rounding unit R2, pneumatically adjustable between thin and thick edge (for straight edge rounding only, not for corner rounding – shelving program) - Radius scraper R2, pneumatically retractable - Glue joint scraper, pneumatically retractable - Hood lock - CE marking - Operating instructions A video of the machine in operation can be provided upon request. All insert knives of the milling units and scrapers have been renewed or rotated, saws have been sharpened. The machine is therefore immediately ready for use. Only the jointing diamond cutters (Whispercut) have not been replaced but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. Machine has only about 730 operating hours (glue pot on), and the frequency inverters have been operated for only about 455 hours. The machine is in very good condition, see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (LxWxH) Weight: approx. 1550 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW Blsdswd Ertopfx Ab Tor

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Bsdpfx Aow I Uxpjb Tslr Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Bjdoxvz T Ispfx Ab Telr Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Working height: 1030 mm, Blodpfx Abet Aifxe Tsr Height: 1680 mm, Depth: 1800 mm, Width: 2450 mm

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm L = 1200 mm D = 1100 mm Blodpfx Aslp Iibob Tjr

Condition: good (used), Data: Bsdpfx Aoi D Ed Neb Tjlr - Manufacturer: Besana - Type: Besana 70/2TC - From current production - Max. Projection to the rear: 1200 mm - Max. Drilling diameter: 300 mm - Table dimension: 1200 x 1200 mm - Machine dimension: D 2400 x W 1200 x H1800 mm - With water pump and circulation cooling - Lower drill, drills automatically with compressed air, upper drill is guided manually - Weight: 1200 kg Price on request