0.60 m³/min Dryer

Kaeser TA 5

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 4528, Part No.: 1.7917.3 Equipment / Additional information: Refrigerant: R134a Refrigerant charge: 0.28 kg Max. working pressure (refrigeration system): 18 bar Max. working pressure (air system): 16 bar Rated voltage / Phase / Frequency: 230V/1/50Hz Rated current: 2.0 A Ambient temperature: +5°C / +43°C WITH TANK EPC 440-250 Part No.: 1.5938.4 // S. No.: 1236 // Age: 2006 Rbjdpfx Aheymmacjvow

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) Rsdpfxouf Sy Ae Ahvjbw - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, Year of construction: 2001, NEW PRICE: 3,150.00 EURO Technical data: Volume flow ISO 7183 A1: 0.6 m³/min Pressure dew point: 3°C Pressure loss: 0.07 bar Electrical power consumption at 100% vol.: 0.29 kW Electrical power consumption at 50% vol.: 0.17 kW Overpressure: 3 to 16 bar Ambient temperature: +3 to +43°C Max. compressed air inlet temperature: 55°C Dimensions W x D x H: 630 x 484 x 779 mm Weight: 70 kg Redew Ahykspfx Ahvobw Compressed air connection: G 3/4" Condensate drain connection: G 1/4" Power supply: 230 V / 1 / 50 Hz

Condition: used, Year of construction: 1997, feed pressure 7,5 bar liter capacity 0,6 m³/min Rbjdpewrztiefx Ahvow motor speeds: 3000 U/min total power requirement 4 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1800 x 650 x 1300 mm

Year of construction: 2012, condition: ready for operation (used), There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories. Rbjdpeflmc Nefx Ahvew

Condition: like new (used), Year of construction: 2011, 1 x Refrigeration Dryer Kaeser TA 5 Year of manufacture: 2011 In mint condition. With operating instructions. Rbjdpjv Tbuqefx Ahvew (Photo follows) The dryer can be inspected at our warehouse at any time.

Year of construction: 2024, condition: new, The FL-430 automatic labeler is perfect for fast and automatic labeling of flat products. The friction feeder allows products of different thickness, dimensions and material to be easily and reliably separated. - LCD display - Standard speed of up to 30 m/min. and a max. label width of 140 mm in combination with the friction feeder 400 installed. - Extended version dispensing labels with a max. speed of up to 50 m/min. and a max. width of up to 260mm - Transparent labeling possible Rjdpfx Aeickh Rshvjbw

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 140 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Rbedpfx Ahsftzhnjvew Any clarification, do not hesitate to contact us.

Condition: used, Year of construction: 2006, functionality: fully functional, color channels: 5, paper weight (min.): 40 g/m², paper weight (max.): 370 g/m², paper width (min.): 400 mm, paper width (max.): 800 mm, paper height (min.): 260 mm, paper height (max.): 600 mm, input voltage: 380 V, Sakurai OL575SD - 5 Colors + Coater Year: 2006 Impressions: 50,000 Max Sheet Size: 60x80 cm Double development cylinders Detachable grinding from unused printing units Printing speed: 15,000 sheets/hour SPC - Sakurai Plate Changing Rodpfx Aewtzp Tohvsbw SAS - Sakurai Auto Set SCC III - Sakurai Colour Console - Type 3 Automatic washing Cloth blanket washing device IR Dryer (Grafix) Chambered doctor blade anilox coater

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: Rbodpfx Ajhkttpohvjw • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days