Compressed air plant

Kaeser

Condition: good (used), Year of construction: 2003, Screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min -Technical data: see photo of the nameplate -Number: 2x heat exchangers available -Price: per piece -Dimensions: 810/385/H660 mm Ljdpfjz D T Tyex Aamehl -Weight: 93 kg/unit

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Lsdpfx Aaoupxcgsmohl Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,614 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser DSDX243SFC, 132 kW with 8.5 bar and 26.90 m³/min. Frequency inverter integrated. New compressor stage installed at around 45,000 operating hours. Ledpfx Aoyhakkeamehl

Condition: excellent (used), Year of construction: 2015, operating hours: 83,875 h, functionality: fully functional, volume flow: 2,040 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 340 refrigerated dryer 34 m3/min Lodpjzupcuefx Aamjhl 16 bar Year of manufacture: 2015

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Ledpsxfrv Eefx Aamohl Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: excellent (used), Year of construction: 2018, operating hours: 81,265 h, functionality: fully functional, volume flow: 1,380 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 230 refrigerant dryer 23 m3/min 16 bar Year of manufacture: 2018 Ljdpozupp Uefx Aamjhl

Condition: excellent (used), Year of construction: 2015, operating hours: 78,886 h, functionality: fully functional, volume flow: 1,680 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 280 refrigerant dryer 28 m3/min Lodpfx Aajzupr Njmjhl 16 bar Year of manufacture: 2015

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Lhjdjw Tbtkepfx Aamol Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: excellent (used), Year of construction: 2015, operating hours: 75,881 h, functionality: fully functional, volume flow: 1,680 m³/h, type of cooling: air, pressure (max.): 16 bar, Equipment: type plate available, Used Kaeser TF 280 refrigerant dryer Lhedjzupuwopfx Aamol 28 m3/min 16 bar Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2007, operating hours: 120,054 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,166 m³/h, pressure (max.): 10 bar, type of cooling: air, Screw compressor Kaeser ESD441 250 kW 10 bar 36.10 m3/min Year of manufacture: 2007 Operating hours: 120,054 h Lsdpfx Aoz Duhlsamjhl

Condition: new, Year of construction: 2026, CORMAK WL3000 laser welding machine is a professional 3-in-1 device with a power output of 3000 W, designed for laser welding, cleaning, and cutting. It has been developed for industrial plants and workshops requiring reliability, precision, and high operating efficiency. Thanks to fiber laser technology, the machine provides exceptional beam stability and enables processing of a wide range of metal materials while maintaining a minimal heat-affected zone. Lhjdpfx Aekkbw Uoamol Main advantages of the machine Maximum power of 3000 W – increased penetration depth and higher welding speed. Water cooling system – ensures stable operating conditions during continuous operation. Ergonomic welding head – lightweight and flexible, with adjustable spot size from 0–5 mm and interchangeable nozzles. Automatic dual wire feeder – integrated with the control system. Welding speed up to 215 mm/s – up to 10 times faster than traditional methods. Ability to process thin materials – for example stainless steel with a thickness of 0.5 mm. Operating modes: continuous / modulated – full control over weld parameters. Welding with or without wire – versatile technological solution. Cleaning and cutting functions – expanded range of applications. Design and technology The machine is based on a fiber laser source with a wavelength of 1070 nm and a 10 m fiber optic cable. Thanks to its compact housing and integrated connections for shielding gases and cooling systems, the CORMAK WL3000 ensures safe and efficient operation. The high-power welding head enables welding at various angles, while the optical system guarantees excellent beam quality and stability. Precision and work efficiency The CORMAK WL3000 laser welder enables fast and repeatable welds without the need for additional finishing operations. Due to the small heat-affected zone, the material structure remains unchanged. Low levels of reflected radiation improve operator safety while maintaining excellent final weld quality. Applications Industrial and manufacturing plants Metalworking, automotive, and HVAC industries Laser welding, cutting, and cleaning of metals: mild steel, stainless steel, aluminum, brass Production of lightweight structures, railings, housings, and precision components Standard equipment Laser welding machine with water cooling system Welding head with focal length adjustment MaxPhotonics laser source Automatic dual wire feeder Connection cables Starter set of nozzles and protective lenses Optional equipment Optical kit for laser cleaning – PLN 1500 net Technical specifications Parameter Value Maximum laser power 3000 W Laser wavelength 1070 nm Fiber optic cable length 10 m Operating modes Continuous / Modulated Shielding gas flow rate 10–15 L/min Welding speed 0–215 mm/s Automatic wire feeder Ø 0.8–2.0 mm Maximum power consumption ≤11.0 kW Focal length 150 mm Cooling system Water cooling Operating voltage 400 V Shielding gas consumption Approx. 10–12 L/min per wire diameter Dimensions 600 × 1100 × 1100 mm Approximate weight 207 kg

Condition: new, Year of construction: 2026, New Kaeser Omega 53P blower. I also have an Omega 52P. Lhedpfxsz Ehake Aamsl

Condition: new, Year of construction: 2026, I also own a Kaeser Omega 41P and a 52P blower, in addition to the 42P. Lodpjz Eg U Hsfx Aamshl

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop Lsdpfx Aega T A Ijamohl PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 116,000 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,520 m³/h, pressure (max.): 8 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser ESD441 250 kW 8 bar Lsdpfetn Utlex Aamshl 42 m3/min Year of manufacture: 2004 Operating hours: 116,060