Pallet stacker

Jungheinrich

Condition: used, machine/vehicle number: 91132839, Year of construction: 2018, operating hours: 9,548 h, No reserve price – guaranteed sale to the highest bidder! Note: The forklift was inspected after relocation. As the necessary transponders are missing, a complete inspection could not be performed. The following defects are known: - Seat locking lever broken off - Switch on steering wheel defective - Left side cover deformed - Access module damaged – button defective - Transponders missing Hfedpfoy Nzl Tsx Ag Ieg The forklift has already been dismantled for transport. MACHINE DETAILS Operating hours: 9,548 h The following technical data is taken from a manufacturer’s data sheet (attached). The seller cannot guarantee its accuracy: TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 401 mm Load distance, mast extended: 215 mm Wheelbase: 1,410 mm MACHINE DETAILS Total weight: 3,438 kg Axle load without load front/rear: 2,292 / 1,146 kg Axle load with load, forks forward front/rear: 902 / 4,132 kg Axle load with load, forks back front/rear: 2,024 / 3,014 kg Tyres: PU Tyre size front: Ø 343 x 114 mm Tyre size rear: Ø 285 x 100 mm Wheels, front/rear: 1x / 2 Rear track width: 1,168 mm

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m Hfedpeuxfz Asfx Ag Ijg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm Hfodpfjy Nc Rwox Ag Iog MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17001, Year of construction: 2019, operating hours: 12,019 h, load capacity: 1,000 kg, lifting height: 4,270 mm, construction height: 2,600 mm, fork length: 1,200 mm, overall weight: 5,419 kg, Rail-guided with PSA! TECHNICAL DETAILS Hsdpfxey Ic Hco Ag Isfg Load capacity: 1,000 kg Lift height: 4,270 mm Load center: 600 mm Overall height: 2,600 mm Fork length: 1,200 mm Total weight: 5,419 kg MACHINE DETAILS Engine type: Electric Total weight: 5,419 kg Operating hours: 12,019 h

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Hsdpsx D Rvnofx Ag Isfg • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets

Condition: used, machine/vehicle number: FN396134, Year of construction: 2009, lifting height: 4,990 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.500 kg Maximum passing height: 210 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Front tyre size: - Hodovmwntjpfx Ag Isfg Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.2x2.09 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: FN504264, Year of construction: 2015, operating hours: 1,169 h, lifting height: 7,500 mm, fuel type: diesel, power: 120 kW (163.15 HP), motor manufacturer: -, gearing type: hydrostat, Lifting capacity: 2.500 kg Maximum passing height: 329 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Hodpfx Agjtr Hnuo Iefg Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.6x1.25x3.28 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 935 mm, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Hedpsx D Rvhjfx Ag Iofg • ATC / tool magazine: 40 positions • Toolsetter • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Barfeeder IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Condition: used, machine/vehicle number: FN504265, Year of construction: 2015, operating hours: 10,187 h, lifting height: 7,500 mm, fuel type: diesel, power: 120 kW (163.15 HP), motor manufacturer: -, gearing type: hydrostat, Lifting capacity: 2.500 kg Maximum passing height: 329 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Hodotr Hzgjpfx Ag Iefg Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.9x1.25x3.28 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: FN423393, Year of construction: 2011, operating hours: 173 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 3.500 kg Maximum passing height: 231 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Continental Front tyre size: - Rear tyre size: - Hedpfx Agstr H D Ae Iefg Transport dimensions (LxWxH): 3.8x1.36x2.3 Please contact PFEIFER GROUP for more information

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, tire size: 155/70R13, Small and maneuverable car trailer from trailer manufacturer TEMARED. The ECO2010KIPP open box trailer is ideal for private transportation and small loads. Garden waste, small furniture - everything you need for private or small commercial use. You can set up the trailer and fold down the drawbar to make it easier to store. Hedpfeq Sly Uex Ag Ijfg The standard equipment of the steel trailer includes a support wheel, locks, galvanized side walls and a fold-down V-drawbar. This model is also available in different versions, for example as a cover trailer or tarpaulin trailer. We also offer trailer accessories such as attachments, tarpaulin and frame, flat tarpaulin, drawbar box and rear supports.

Condition: used, machine/vehicle number: FN423395, Year of construction: 2011, operating hours: 1,180 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: -, gearing type: hydrostat, Lifting capacity: 3.500 kg Maximum passing height: 231 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Continental Hfjdpfetr Hzvex Ag Ijg Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.8x1.36x2.3 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: FN396119, Year of construction: 2009, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 3.500 kg Maximum passing height: 231 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Front tyre size: - Rear tyre size: - Hedpfx Ajxwi Rqeg Isfg Transport dimensions (LxWxH): 3.8x1.36x2.3 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 45,000 W, spindle speed (max.): 3,500 rpm, total height: 2,110 mm, overall weight: 7,600 kg, controller manufacturer: OKUMA, controller model: OSP -P200L, product length (max.): 5,330 mm, number of axes: 2, This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine. • Number of axes: 2 + C • Swing diameter over bed: 620 mm • Swing diameter over saddle: 420 mm • Distance between centers: 1,270 mm • Chuck size: 400 mm • Bar capacity: 80 mm Hodpjygxccjfx Ag Iefg • Turret type: Motorized • Tool stations: 12 positions • X rapid traverse: 20 m/min • Z rapid traverse: 25 m/min • Tailstock spindle taper: MT #5

Condition: used, machine/vehicle number: FN396133, Year of construction: 2009, operating hours: 3,410 h, lifting height: 4,990 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.500 kg Maximum passing height: 210 cm Front tyres / undercarriage remaining: 70 Hodpfxoyi R Uio Ag Iofg Rear tyres remaining : 70 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.2x2.09 Please contact PFEIFER GROUP for more information