Electric Stacker

Jungheinrich EMC 110

Condition: good (used), Year of construction: 2008, Forklift truck, Crown, 1 ton, lifting height 1.55 m and 2.50 m - used - : Price (including charger) per unit ex location (net): Jungheinrich type EMC 110: €1,950 Manufacturer: Crown Type: 3000 series Model: WF3000-1.0 NT Lifting height: approx. 1,550 mm Load center: 600 mm Load capacity: 1,000 kg Vehicle weight including battery: approx. 670 kg Track width: 382 24 V Device 1: Year of manufacture; 2007 Serial number: 5A509782 approx. 1,870 operating hours as of: February 13, 2025 Device 2: Year of manufacture; 2006 Serial number: 5A505288 approx. 937 operating hours as of: February 13, 2025 Device 3: Year of manufacture; unknown - but newer than the others according to the serial number Serial number: 5A533540 approx. 666 operating hours as of: February 13, 2025 Device 4: Year of manufacture; unknown Serial number: unknown Operating hours 656 as of: August 21, 2024 Device 5: Year of manufacture; unknown Serial number: unknown Operating hours 581 as of: February 13, 2025 Device 6: Year of manufacture; 2007 Serial number: 5A509780 Operating hours 1,203 as of: February 13, 2025 Device 7: Year of manufacture; 2008 Serial number: 5A515668 Operating hours 1,391 Status: February 13, 2025 Lifting height: 2,500mm Vehicle weight including battery: approx. 768kg Device 8: Year of manufacture; 2008 Serial number: 5A515674 Operating hours 1,400 Status: February 13, 2025 Lifting height: 2,500mm Vehicle weight including battery: approx. 768kg Device 9: Year of manufacture; 2006 Serial number: 5A505290 Operating hours 1,423 Status: February 13, 2025 Fork length: 1.50m Lifting height: 2,500mm Vehicle weight including battery: approx. 768kg Device 9: Year of manufacture; 2006 Serial number: 5A505290 Operating hours 1,423 Status: February 13, 2025 Fork length: 1.50m Lifting height: 2,500mm Redsv A Ru Ejpfx Aahew Vehicle weight including battery: approx. 768kg Device 10: Year of manufacture; 2008 Serial number: 5A515666 Operating hours 1,167 Status: February 13, 2025 Lifting height: 2,500mm Vehicle weight including battery: approx. 768kg Device 11: Year of manufacture; 2008 Serial number: 5A515672 Operating hours 1,329 Status: February 13, 2025 Lifting height: 2,500mm

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Rodpfx Ajygtbtjahew Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Rjdpfoy H Evksx Aahjw

Condition: new, Year of construction: 2020, Jungheinrich EMC 110 Warehouse Truck (2020) – Electric Pallet Truck 1000 kg We offer a Jungheinrich EMC 110 electric warehouse truck – a compact and efficient pallet truck ideal for operations in warehouses, production halls, logistics centers, and retail stores. This unit from the renowned Jungheinrich AG brand, manufactured in 2020, ensures smooth handling of standard-sized pallets with low operating costs. 📌 Technical Specifications Manufacturer: Jungheinrich AG, 22039 Hamburg, Germany Model / Type: EMC 110 Serial number: 90614162 Year of manufacture: 2020 Rated capacity: 1000 kg Load center distance: 600 mm Battery voltage: 24 V Drive power: 0.5 kW Redpfoyu Tdqox Aahew Truck weight without battery: 396 kg Permissible battery weight: 60–66 kg 🛠️ Features The Jungheinrich EMC 110 is a lightweight, electric pallet truck that offers: ✔ Efficient 24 V electric drive – quiet and emission-free operation indoors, ✔ Easy control and maneuverability, even in narrow aisles, ✔ High degree of load handling control and safety during transport, ✔ Robust, compact design suitable for intensive warehouse usage. This machine is perfectly suited for daily pallet operations – loading/unloading, internal transport, and order picking. ⚙️ Application The EMC 110 truck is designed for: pallet transport in warehouses and halls, loading and unloading operations, short-distance goods movement, indoor activities requiring low noise and zero emissions. 📍 Key Advantages ✔ 1000 kg lifting capacity – suitable for most standard pallets ✔ Comfortable handling – intuitive controls and smooth maneuvering ✔ Low unladen weight facilitates operation and handling ✔ Jungheinrich brand – proven quality and durability 🎯 Who is it for? This model is recommended especially for: warehouses and logistics centers, manufacturing companies, stores with their own warehouse facilities, service providers and businesses with moderate pallet handling needs.

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT Rjdpfx Aaoidqr Sehew The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Year of construction: 2026, condition: new, NEW from ECO3 Factory - expires minimum 18 Months after purchase. ECO3 HNS 600BD Film 338 mm x 60 m 33,8 cm width - 60 m length Specification: 600BD Code: 4LGNQ For many different Imagesetters - e.q. AccuSet and Avantra 25 / 30 with Redlight-Laser 650 - 670 nm Redpfx Aasb Rlbfehew

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. Rsdoum R Ezepfx Aahow The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Configuration: -Film unwinding shaft -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Rsdpfx Aaeyudacshjw - Lid format: CDL202 - Can diameter: 50 mm – 85 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Rsdpfx Aov Ipvxoahew

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical specifications: - Max. grinding length approx. 350 mm - Max. grinding width 150 mm - Max. installation height with/without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180° Rjdpfx Aasklxwkshow - Manual swivel arm clamping via clamping lever - Wet grinding system - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg