Forklift

Jungheinrich EFG425K Valid inspection, *Guarantee! Electric, Li

Condition: used, machine/vehicle number: FN504265, Year of construction: 2015, operating hours: 10,187 h, lifting height: 7,500 mm, fuel type: diesel, power: 120 kW (163.15 HP), motor manufacturer: -, gearing type: hydrostat, Lifting capacity: 2.500 kg Maximum passing height: 329 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.9x1.25x3.28 Ledpfetr Hzgjx Agrjai Please contact PFEIFER GROUP for more information

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: Ljdpfjtqfg Hex Agroai 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Ljdpswa R A Njfx Agrjai Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Lajdpfspy Errox Agrei

Condition: used, Year of construction: 2005, Bottling line AVE - 2005 Speed: 2,500 bottles/hour for sparkling wine 3,000 bottles/hour for still wine. Depalletizer GP ENGINEERING model COMPACT 52 Isobaric filling monoblock AVE 24.24.6: Rinser with 24 clamps, single treatment - fixed nozzle Filler with 24 valves with pre-evacuation and self-leveling Corker with 6 heads for natural straight and mushroom corks. Caps orientator AVE Bottle washer/dryer CAMES model W DT 3/8 Capsuling machine ROBINO & GALANDRINO model FENIX 2, suitable for PVC and polylaminate capsules Labeller AVE adhesive and cold glue model 12T 4S 4E, suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING model ISOLA 700: Lsdpfx Agstr Hhverjai Box forming machine – American box Case packer with single adjustable head Hives inserter AVE Box closing machine top and bottom hot glue AVE Palletizer GP ENGINEERING model PABR 50 Semi-automatic pallet wrapper AVE Level control FT SYSTEM model CL 100 complete with conveyor rejection system Label check FT SYSTEM model CE 300-2-CC001 complete with conveyor rejection system Carton weighing machine WEICOMP model KD/CPW S/N 83623 Inkjet printer for boxes ZANASI model Z JET 303 Conveyor for bottles and boxes existing on the line with electric control panel. Existing line formats included. Safety protections.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work Lsdpfx Asrz Nfljgrsai carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 5,000 kg, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center by DMG with TNC7 control system Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Condition: Good and fully functional Control: Heidenhain TNC7 Travel distances: - X-axis: 1800 mm - Y-axis: 2000 mm - Z-axis: 1100 mm Technical specifications: - Rotary table Ø1400 x 1700 mm - Table load capacity: 6000 kg - B-axis - 60-position tool changer - SK 50 spindle taper - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinsing gun - Infrared probe Optional: - Kineopt - VCS-Complete - High-frequency spindle, 30,000 rpm Transport and commissioning can be offered separately. Lodpfxsxtwkws Agrsai Interim sale reserved. No guarantee is given for the technical details provided here. Statutory regulations apply.

Condition: ready for operation (used), Year of construction: 2011, Backing paper min./max. passage width: 30mm/300mm, diameter label roll inside/outside: 76mm/280mm, binding diameter: min./max.: 25mm/210mm, pressure plate height: 120mm/200mm/300mm, conveyor belt width: 82mm/114mm/190mm, dimensions X/Y/Z: approx. 2500mm/1400mm/1500mm. Documentation available. Lajdpfx Agst I Tz Ijrei

Condition: like new (used), Used Bottling Line | Used Beverage Line | Wine MBF NP 574 | Bottling Line for Still Wine Year: 2011 Speed: 10,000 Bph Ljdpfotr Hd Sjx Agrjai Cork elevator Filling Monoblock MBF 45.50.6 | Year: 2011 Rinser 45 clamps Filling machine 50 valves Capper 6 screw heads Bottle dryer Bottle inspector | Level control Sacmi Kube | Labeling machine Year: 2017 No.6 adhesive stations Cermex carton moulder Gluer Nordson TMG cartoning machine DS Smith carton closer Nordson Gluer Carton weigher CONVEYOR BELTS ABSENT

Year of construction: 2012, operating hours: 7,357 h, condition: ready for operation (used), Movement X-Axis Movement 600 Y-Axis Movement 420 Z-Axis Movement 370 Additional Equipment Replaceable paper filter / SEC-10 (C-axis) / SGF2 Nano Wear Unit / Fire Extinguisher / TMM3 Power Generator / Dielectric Cooling Unit / 15" TFT Touch Screen / Lowerable Work Container Linear motor (X-, Y-, Z-axes) / Glass scales in X-, Y-, Z-axes / Ceramic work area / Remote control Lajdpew Nlbqefx Agrsi Accessories include electrodes (graphite, tungsten, and copper), electrode holders, and jigs with documentation. / Some electrode holders with electrodes are still in the machine. This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine. Application Types EDM