Sideloader

Jumbo LQ50/12/45

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Technical condition: very good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machines. Our team will be happy to provide you with competent and personal advice. Just call us or send us a message via SMS or WhatsApp. The Magni RTH 8.27 is a powerful rotating telescopic loader for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, an endlessly rotating upper carriage, and all-wheel drive, the machine is ideal for heavy loads, working at heights, and operating on difficult terrain. High reach and off-road capability. Robust, powerful, and easy to operate. You can find more information and submit a non-binding inquiry on our website – Safe working at any height. Gjdpfx Aovgi A Nskyebu

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° Gsdpjuagxpofx Akyjbu no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Gbjdpfx Akega T Dpjysu Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, functionality: fully functional, Year of construction: 2017, For sale: CNC bending machine CIDAN FORMA 40 Multifold Condition: Used. Operating hours: 6568 hours. Manufacturer: CIDAN Machinery AB (Sweden) Model: CIDAN FORMA0 40 High-end CNC-controlled sheet metal bending machine designed for the precise and fast production of various shaped profiles. Technical specifications: Year of manufacture: 2017.11 Total weight: 5660 kg Control: CNC with PROLINK Operating hours: 6568 h Table height adjustment: from 0 to 36 mm Mechanical bend compensation adjustment (Crowning system) Working length: 4100 mm Max. bending thickness: 2.5 mm Equipment: Automatic rear support – flexible U-shape model (4.5 m x 1.2 m x 1.74 m) Swiveling upper beam – COMBI MULTIFOLD type Segmented tools for lower and bending beams with SBG 15 table CNC control with PROLINK graphical user interface (intuitive, easy programming) Quick change system for tools High accuracy and repeatability Gsdpfxjy U I I Ee Akyjbu Application: This machine is designed for bending, forming and profiling sheet metal. Ideal for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. Gbjdpop Stgnofx Akyju In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information The machine is mounted on a beam and has not been connected to the mains since November 2025!The buyer purchases the item subject to the exclusion of any liability for material defects!The spindle was replaced in 2022 for approximately 20,000.00 euros!The spindle has clocked up only approximately 1,400 hours since then Technical Specification Through-spindle Coolant Yes Gbsdpox T Dgnefx Akyeu

Condition: ready for operation (used), Year of construction: 2002, Vehicle description: Gjdpfx Aeid R Dnekysbu Diesel side loader forklift JUMBO 50/12/45 Year of manufacture: 2002 According to the meter: 3,724 operating hours 5-ton lifting capacity 4.5-meter lifting height 1.2-meter fork length Selling price: EUR 21,950.00 net Affordable delivery also possible!

Condition: new, Year of construction: 2024, Genie GS4069DC electric scissor lift, new, used, demonstration machines available Gsdpfxovm U Hae Akyebu

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 170 kg, arm reach: 2,700 mm, Model: KR 200 L170-2 comp Condition: USED Gbedpfxjq A Uq Us Akyou Year: 2007 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm Gsdpsqva Rzefx Akysbu engine output 7,5 kW Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available