Continuous veneer press

Joos DLP 150/OK

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressure: 2.8 – 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety release line Safety frame Push-button control Connected load: 19.3 kW External dimensions: 2960 x 1490 x 1890 mm Storage location: Supplier Hodpoxy Tl Rofx Ahvoi

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Hjdpfoxxpgbex Ahvsi Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Hsdpfsv Si Szsx Ahvei Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2002, Used ORMAMACCHINE hot press model NPC/R 6/120 Hsdpfoxn Nnwox Ahvji working dimensions: 3500 x 1300 mm solid platens in perforated steel fixed lower platen; movable upper platen platen thickness: 80 mm number of cylinders: 6 total pressing force: 120 ton pistons diameter: 85 mm installed power: 8 kW year of manufacture: 2002 CE marked

Condition: ready for operation (used), plate length 3500mm plate width 1300mm two inserts Hsdpfx Ahsrk Itnsvoi water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: used, Year of construction: 1990, total width: 1,500 mm, total length: 3,150 mm, total height: 2,100 mm, overall weight: 5,000 kg, pressing force: 135 t, opening width: 400 mm, operating pressure: 340 bar, power: 22 kW (29.91 HP), cylinder diameter: 90 mm, transport width: 1,500 mm, space requirement width: 1,500 mm, space requirement length: 3,150 mm, transport height: 2,100 mm, transport length: 3,150 mm, space requirement height: 2,100 mm, pressure: 340 bar, working width: 1,350 mm, empty load weight: 5,000 kg, plate width: 1,350 mm, table width: 1,350 mm, table length: 2,550 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg Hodpfxsykt H Rs Ahvji To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: -, ORMA NPC/DIGIT 6/95. Press area of 3000x1300 mm, six cylinders.Press opening stroke 650 mm. 3 loads. Pressure 90 ton. 18 kW electro-heater for thermo-oil heating up to 120°C. Parallelism control by sensor. CE-standard. Transport throughout Europe is available at a good price. Hjdpfx Ahoyf Azgsvei

Condition: excellent (used), Year of construction: 2002, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch Hsdjx Sqlzspfx Ahvsi year 2002

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Hjdpfxsyf Euco Ahvji Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards