Forklift

JMG MC250.09FL Valid inspection, *Guarantee! Fully Ele

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 184 3500 2E Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 184cm Side wall height: 30cm Loading platform height: 68cm Gross vehicle weight: 3500kg Payload: 2746kg Braked tandem axle trailer Overrun and hand brake by AL-KO Largest possible axle and brake configuration Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks All sides foldable and removable 15mm thick, slip-resistant and robust phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel, 400kg support load 8 noise-reducing lashing rings with 800kg pulling force Reinforced 13" C-type tires with steel valve Fsdpfx Asghpc Njdvopd M+S tires Mesh/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, rear fog light, and triangular reflectors Upper frame mounted on rubber buffers Large rear tipping angle of 51 degrees Electric tipping operation with plug for charging the 12V battery OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with carrier - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (black powder-coated side walls and rims) - Integrated loading ramps 2800kg - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump - Safety support for maintenance work when tipped - Folding crank rear supports - Complete LED lighting - Anti-theft device - Mesh cover (fine or coarse) - H-frame - Mesh grid in various heights, also fully enclosed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus delivery to Gera and vehicle registration document €250 net Images are example views and may include optional equipment offered at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist in axle repair, also for caravans. We also offer a wide range of spare parts and accessories for trailers from various manufacturers. You’ll also find a wide array of rental trailers available. Visit us online or stop by in person!

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Fodpfstrd T Tjx Advepd Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Fpjdpfx Adjvpgq Njvod Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-way Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 75cm Gross weight: 3500kg Payload: 2702kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum size axle and brake Low chassis height Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls with tension locks Fold-down and removable on all sides 15mm thick, anti-slip and durable phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing eyes with 800kg tensile strength each Reinforced 13'' commercial tyres with steel valves M+S tires Net/roping hooks on the frame 13-pin connector LED position lights at the front Rear lamps with reversing light, fog lamp, and triangular reflector Upper frame mounted on rubber bushings Generous tipping angle of 49 degrees to the rear Side tipping by relocating safety pins Electric tipping operation with charging plug for the 12V battery Electric lateral tipping angle limiter U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h package (shock absorbers) - Spare wheel with bracket - Without sideboards (discounted price) Fodjghpc Tjpfx Advopd - Black Edition (powder-coated sideboards and rims in black) - Integrated ramps 2800kg - 35cm sideboards - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump to use with electric operation - Safety support for maintenance work with tilted trailer - Folding crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - Headboard - Leaf mesh in various heights, also closed - 30cm extension sideboards with tension lock - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration documents (Kfz-Brief) €250 net Images are for illustration purposes and may show equipment subject to a surcharge. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate delivery. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Axle repair specialist, including for caravans. We also offer a wide range of spare parts and accessories, also for trailers from different manufacturers. A large selection of rental trailers is available on site. Visit us online or stop by directly!

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), fuel type: electric, color: silver, overall weight: 2,460 kg, mast type: telescopic, Year of construction: 2022, operating hours: 21 h, machine/vehicle number: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. However, there is no doubt that it is capable of handling “big” tasks, as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane comes standard with non-marking tires that do not leave chalk residues. The crane's 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, can operate for up to 8 hours without needing to be recharged. The telescopic boom extends proportionally and can be further extended with a jib on request. JMG MC 25S - Capacity 2,500 kg - Net weight 2,460 kg - Width 900 mm - Height 1,600 mm - Drive Electric - Power output 4 kW - Tires Solideal Magnum - Hydraulic winch - Telescopic boom Fpsdpfx Adew S Ii Njved - Counterweights - Battery 24 V 420 Ah - Automatic braking system - Front-wheel drive - 2 gear stages - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle +60° / -15° - Ground clearance 70 mm - Tires - front 18 x 7-8 - Tires - rear 15 x 4.5-8 - Operating manual - Electric motors - Insulation class H

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm Fpsdpfeu Icc Asx Advod ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system. Fodpjtp Dhpsfx Advspd  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2010, MORI SEIKI DuraVertical 5060 Year: 2010 Control MSX-504 III x-travel 600mm y-travel 530mm z-travel 510mm Main spindle: turning speeds max. 10.000min/-1 power capacity - main spindel 15 / 11kW Fsdpfx Asxq Hlxjdvepd tool taper BT 40 spindle bearing diameter 70mm distance spindle /table 150 - 660mm work table: table surface area 900 x 600mm max. table load 500kg T-slots 6x 18mm turret: number of toolpositions 30pos. tool taper BT 40 max. tool diameter 80mm max. tool-dia with free toolbox 125mm max. tool length 300mm max. tool weight 8,0kg feeds: rapid traverse ( X / Y / Z ) 36 / 36 / 20m/min feed speeds max. 6.000mm/min Tipp feed 0 - 5.000mm/min total power requirement 27kVA weight of the machine ca. 5,8t dimensions of the machine ca. 3,5 x 3,0 x 2,8m Accessories/options: 4.axis rotary table tool holders BT40 type, 30 pieces precision vice swarf conveyor coolant tank documentations

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, trailer coupling, = Additional Options and Equipment = - Remote central locking - Refrigerator - Towing jaw coupling - Hub reduction - PTO (Power Take-Off) - Radio Fsdpfx Adewt T A Eevopd - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox - Central lubrication system = Notes = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Workremote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outriggers. 7 x hydraulic extensions on main boom. 5 x hydraulic extensions on fly jib. Maximum hydraulic outreach: 36.8 metres. Maximum lifting capacity: 45,000 kg. 4.80 m – 46,000 kg 6.80 m – 35,600 kg 9.60 m – 24,000 kg 11.50 m – 19,000 kg 13.80 m – 14,000 kg 15.90 m – 12,500 kg 18.30 m – 11,000 kg 20.70 m – 9,000 kg Manual extension: 23.60 m – 7,200 kg Jib -5: 24.30 m – 4,200 kg 27.10 m – 3,460 kg 29.40 m – 2,900 kg 31.70 m – 2,460 kg 34.20 m – 2,026 kg 36.80 m – 1,700 kg Manual extension: 40.20 m – 1,000 kg 43.60 m – 800 kg 46.80 m – 350 kg = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tyre size: 385/65R22.5; Steered; Tyre tread left: 75%; Tyre tread right: 75%; Suspension: leaf spring Front axle 2: Tyre size: 385/65R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30%; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Suspension: air suspension Rear axle 3: Tyre size: 385/65R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: air suspension Weights Unladen weight: 53,320 kg Payload: 680 kg Gross vehicle weight: 54,000 kg Functionality Crane: Erkin World Power Financial Information Price: On request Identification Type number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company Information = ALL PRICES ARE NET FOR EXPORT. Contact: Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Russian spoken. We make every effort to provide correct information; however, no rights can be derived from the information provided.

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. The machines are in very good condition, have been regularly serviced, and are ready for immediate use. Fsdpfx Asxdwayodvjpd They impress with their precision, reliability, and compact design – ideal for series production.