Telescopic loader

JCB 531-70 Agri

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Dcedpeuycgfefx Ab Ter Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: new, feed pressure 13 bar Effective free air delivery 690 L/min Receiver capacity 270l / 16bar l / bar weight of the machine ca. 199 kg. motor 400V / 5,5KW V / KW range L-W-H 1,7 x 0,6 x 1,27 mm Dcedpfx Abjfgygxo Tor It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telehandler Mast type: Telescopic Speed category: 40 km/h Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres size: 400/70-24 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 400/70-24 Rear tyres condition: 80 - 100% Equipment: - 3rd hydraulic function, 4th hydraulic function - Rear work lights, front work lights - Heater - Full cab - Air conditioning - CE certification - Exterior mirrors - Joystick control - Beacon - Windscreen wiper - LED lighting Specifications: - Road approval as towing tractor with trailer capability - 20.0 tonnes with 7-pin trailer socket - Fixed Dieci equipment carrier plate with dual hydraulic quick coupler, operated from the cab, for attachments including hydraulic coupling (Mandatory with adapter plate for forks when using quick change system) - Lifting capacity: 3200 kg Dcedpfx Abow Eqdds Tjr - Lifting height: 9.0 m - Engine: KUBOTA 79.5 kW (107 hp) - Displacement: 3769 cm³ - Emission standard: Tier 4f - Steering: all-wheel steering / crab steering / front-wheel steering - Rear hydraulics - 40 km/h maximum speed - Air suspension seat - Mounting plate with hydraulically operated quick coupler - Steering indicator lamp

Condition: good (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, overall weight: 5,500 kg, maximum load weight: 2,500 kg, lifting height: 6,000 mm, mast type: telescopic, Year of construction: 2018, operating hours: 3,150 h, Equipment: all wheel drive, cabin, gripper hydraulics, pallet forks, standard shovel, JCB 525-60 T4 telehandler - good condition Technical Data: Control: joystick Four swivel wheels 4WS Type of engine Kohler k.A. 2,5 l Engine power: 75 hp Maximum reach: 2.64 m Lifting height: 6 m Dcjdpfx Ajuvc Iyob Tsr Dead weight: 5.49 t Driving speed with/without load: 25km/h Transport width: 1.84m Transport height: 1.89m Maximum load capacity: 2500 kg Mileage: 3142 mth. No leaks at the engine and other components Quick installation of forks and bucket Attachments: Pallet forks, Loader bucket Rear automatic hitch.

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 2,600 kg, lifting height: 5,730 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Rigid telehandler Mast type: Standard Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: MINI AGRI 26.6 STAGE V, TÜV/DEKRA approval, 20 KM/H. Standard steering axles, hydraulic single-lever control with proportional and simultaneous operation (flow-sharing). Closed-center system including pressure release kit for hydraulic couplings. Compatible with lifting equipment and winches. (Joystick with dead man's switch sensor). Air suspension seat. Air conditioning. Wheel set #12.0/75-18 with fenders. EURO mounting plate with quick-change system for attachments, hydraulically controlled from the cab. Steering warning indicator. Radio pre-installation with speakers and antenna. Work lights on cab. Two rear swiveling LED work lights on cab. Additional external glove compartment. Boom suspension system. Dcsdpfx Absw Eqcte Tsr 3rd valve, 4th valve, rear work light, front work light, heating, full cab, CE certificate, with Weidemann mount.

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive Dcsdpsu Rpibsfx Ab Ter - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: new, overall weight: 440 kg, rotational speed (max.): 950 rpm, motor manufacturer: Cummins, Industrial Engine Cummins QSF3.8 97kW It is a complete package with straps and everything, as shown in the picture. Manufactured by Cummins Inc. Engine Serial No. 76501916 Family KCEx103.8AAB Dcjdpfxov Eabts Ab Tsr Gross Rated kW - 97 kW at 2500 rpm Idle RPM 950 Transport weight - 440 kg Emission Level: Tier 4 Final / Stage IV Configuration: 4-cylinder, turbocharged, high-pressure common rail Cooling: Liquid-cooled Keywords: CM2350 Continental P5317106 1T2350A07192732 T1669 FS109S CB80031.12 BFCEC P5476423 S03068876501946

Condition: used, lifting height: 7,000 mm, Year of construction: 2011, operating hours: 4,950 h, load capacity: 3,100 kg, Equipment: cabin, JCB 531-70 Year of manufacture: 2011 Approx. 4950 operating hours (still in use) Recently serviced JCB Eco Max 4.4-liter engine No DPF or exhaust aftertreatment Front tires 100% 3 control circuits 3 steering modes – front-wheel, crab, all-wheel drive Lifting height: 7 m Load capacity: 3.1 t Price: €31,900.00 net Available at extra cost: Earth bucket: €1,390.00 net Light material bucket 2 m³: €1,950.00 net Light material bucket 2.7 m³: €2,150.00 net Light material bucket with double cutting edge (reversible blade) 2 m³: €2,250.00 net Light material bucket with double cutting edge (reversible blade) 2.7 m³: €2,450.00 net For JCB or Manitou, Claas, Merlo Dsdpfx Abow Aiw Ds Tocr Small work platform 1.2 m wide: €990.00 net Large work platform 2 m wide: €1,550.00 net Viewing possible at any time by prior telephone arrangement. All information without guarantee.

Condition: new, Year of construction: 2024, operating hours: 366 h, Claas Scorpion 756 Used demo machine Currently approx. 150 operating hours Equipment: CLAAS tool carrier, hydraulic, incl. lifting bolts Swivel angle 150° / 152° Emergency lowering for telescopic arm Front socket, 4-pin Rear socket, 7-pin Automatic height-adjustable towing hitch 3rd & 4th auxiliary hydraulic circuit front (double acting) incl. continuous flow function Pressure relief front, from cab and externally at telescopic arm 3rd auxiliary hydraulic circuit front (double acting) incl. continuous flow function Top frame cover Dcjdpfewfivxsx Ab Tor Boom wiper, front 40 km/h VARIPOWER PLUS 500/70 R24 Michelin Bibload tyres Deutz engine, 4.1 litres, 115 kW, Stage V Pre-separator for vacuum Reversible cooling fan with automatic function Diesel particulate filter Combination display instrument, multicolour display 3.5" Interior rear view mirror Air conditioning Windscreen and roof window wipers Steering column, tilt and height adjustable in two stages Driver's seat, fabric cover, low frequency, with seat heating Radio with Bluetooth, hands-free system with external microphone LED work lights on telescopic arm, front, 2 units Sunblinds for roof and windscreen LED work lights, 3 front & 3 rear Vibration damping Automatic bucket return Central lubrication points, 3 locations (front, rear, telescopic arm) Central lubrication system, prepared Creeper speed drive and hand throttle with DYNAMIC POWER Bucket cylinder shaking function EC certificate of conformity Overload warning system | Internal no.: 11180852